include/configs/ipek01.h

   1 /*
   2  * (C) Copyright 2006
   3  * MicroSys GmbH
   4  *
   5  * (C) Copyright 2009
   6  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17
  18 #define CONFIG_MPC5200
  19 #define CONFIG_MPX5200          1       /* MPX5200 board */
  20 #define CONFIG_MPC5200_DDR      1       /* use DDR RAM */
  21 #define CONFIG_IPEK01                   /* Motherboard is ipek01 */
  22
  23 #define CONFIG_SYS_TEXT_BASE    0xfc000000
  24
  25 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  26
  27 #define CONFIG_MISC_INIT_R
  28
  29 #define CONFIG_SYS_CACHELINE_SIZE       32 /* For MPC5xxx CPUs */
  30 #ifdef CONFIG_CMD_KGDB
  31 #define CONFIG_SYS_CACHELINE_SHIFT      5  /* log base 2 of the above value */
  32 #endif
  33
  34 /*
  35  * Serial console configuration
  36  */
  37 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  38 #define CONFIG_BAUDRATE         115200  /* ... at 9600 bps */
  39 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  40
  41 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
  42
  43 /*
  44  * Video configuration for LIME GDC
  45  */
  46 #ifdef CONFIG_VIDEO
  47 #define CONFIG_VIDEO_MB862xx
  48 #define CONFIG_VIDEO_MB862xx_ACCEL
  49 #define VIDEO_FB_16BPP_WORD_SWAP
  50 #define CONFIG_VIDEO_LOGO
  51 #define CONFIG_VIDEO_BMP_LOGO
  52 #define CONFIG_CONSOLE_EXTRA_INFO
  53 #define CONFIG_VIDEO_SW_CURSOR
  54 #define CONFIG_SPLASH_SCREEN
  55 #define CONFIG_VIDEO_BMP_GZIP
  56 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  57 /* Lime clock frequency */
  58 #define CONFIG_SYS_MB862xx_CCF  0x90000 /* geo 166MHz other 133MHz */
  59 /* SDRAM parameter */
  60 #define CONFIG_SYS_MB862xx_MMR  0x41c767e3
  61 #endif
  62
  63 /*
  64  * PCI Mapping:
  65  * 0x40000000 - 0x4fffffff - PCI Memory
  66  * 0x50000000 - 0x50ffffff - PCI IO Space
  67  */
  68 #define CONFIG_PCI              1
  69 #define CONFIG_PCI_PNP          1
  70 #define CONFIG_PCI_SCAN_SHOW    1
  71
  72 #define CONFIG_PCI_MEM_BUS      0x40000000
  73 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  74 #define CONFIG_PCI_MEM_SIZE     0x10000000
  75
  76 #define CONFIG_PCI_IO_BUS       0x50000000
  77 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  78 #define CONFIG_PCI_IO_SIZE      0x01000000
  79
  80 #define CONFIG_MII              1
  81 #define CONFIG_EEPRO100         1
  82 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
  83
  84 /* Partitions */
  85 #define CONFIG_DOS_PARTITION
  86
  87 /* USB */
  88 #define CONFIG_USB_OHCI_NEW
  89 #define CONFIG_SYS_OHCI_BE_CONTROLLER
  90
  91 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  92 #define CONFIG_SYS_USB_OHCI_REGS_BASE           MPC5XXX_USB
  93 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "mpc5200"
  94 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
  95
  96 /*
  97  * Command line configuration.
  98  */
  99 #ifdef CONFIG_VIDEO
 100 #define CONFIG_CMD_BMP          /* BMP support */
 101 #endif
 102 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
 103 #define CONFIG_CMD_IDE          /* IDE harddisk support */
 104 #define CONFIG_CMD_IRQ          /* irqinfo */
 105 #define CONFIG_CMD_PCI          /* pciinfo */
 106
 107 #define CONFIG_SYS_LOWBOOT      1
 108
 109 /*
 110  * Autobooting
 111  */
 112
 113 #define CONFIG_PREBOOT  "echo;" \
 114         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 115         "echo"
 116
 117 #undef  CONFIG_BOOTARGS
 118
 119 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 120         "netdev=eth0\0"                                                 \
 121         "consoledev=ttyPSC0\0"                                          \
 122         "hostname=ipek01\0"                                             \
 123         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 124                 "nfsroot=${serverip}:${rootpath}\0"                     \
 125         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 126         "addip=setenv bootargs ${bootargs} "                            \
 127                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 128                 ":${hostname}:${netdev}:off panic=1\0"                  \
 129         "addtty=setenv bootargs ${bootargs} "                           \
 130                 "console=${consoledev},${baudrate}\0"                   \
 131         "flash_nfs=run nfsargs addip addtty;"                           \
 132                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 133         "flash_self=run ramargs addip addtty;"                          \
 134                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"     \
 135         "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};"  \
 136                 "run nfsargs addip addtty;"                             \
 137                  "bootm ${loadaddr} - ${fdtaddr}\0"                     \
 138         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 139         "bootfile=ipek01/uImage\0"                                      \
 140         "load=tftp 100000 ipek01/u-boot.bin\0"                          \
 141         "update=protect off FC000000 +60000; era FC000000 +60000; "     \
 142                 "cp.b 100000 FC000000 ${filesize}\0"                    \
 143         "upd=run load;run update\0"                                     \
 144         "fdtaddr=800000\0"                                              \
 145         "loadaddr=400000\0"                                             \
 146         "fdtfile=ipek01/ipek01.dtb\0"                                   \
 147         ""
 148
 149 #define CONFIG_BOOTCOMMAND      "run flash_self"
 150
 151 /*
 152  * IPB Bus clocking configuration.
 153  */
 154 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* for 133MHz */
 155 /* PCI clock must be 33, because board will not boot */
 156 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for 66MHz */
 157
 158 /*
 159  * Open firmware flat tree support
 160  */
 161 #define OF_CPU                  "PowerPC,5200@0"
 162 #define OF_SOC                  "soc5200@f0000000"
 163 #define OF_TBCLK                (bd->bi_busfreq / 4)
 164
 165 /*
 166  * I2C configuration
 167  */
 168 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 169 #define CONFIG_SYS_I2C_MODULE   2       /* Select I2C module #1 or #2 */
 170
 171 #define CONFIG_SYS_I2C_SPEED    100000  /* 100 kHz */
 172 #define CONFIG_SYS_I2C_SLAVE    0x7F
 173
 174 /*
 175  * EEPROM configuration
 176  */
 177 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 178 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 179 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 180 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 181
 182 /*
 183  * RTC configuration
 184  */
 185 #define CONFIG_RTC_PCF8563
 186 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 187
 188 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 189 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 190 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + \
 191                                          CONFIG_SYS_MONITOR_LEN)
 192
 193 #define CONFIG_SYS_MAX_FLASH_BANKS      1    /* max num of memory banks */
 194 #define CONFIG_SYS_MAX_FLASH_SECT       256  /* max num of sects on one chip */
 195 #define CONFIG_SYS_FLASH_PROTECTION  /* "Real" (hardware) sectors protection */
 196
 197 /* use CFI flash driver */
 198 #define CONFIG_FLASH_CFI_DRIVER
 199 #define CONFIG_SYS_FLASH_CFI
 200 #define CONFIG_SYS_FLASH_EMPTY_INFO
 201 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 202
 203 /*
 204  * Environment settings
 205  */
 206 #define CONFIG_ENV_IS_IN_FLASH          1
 207 #define CONFIG_ENV_SIZE                 0x10000
 208 #define CONFIG_ENV_SECT_SIZE            0x20000
 209 #define CONFIG_ENV_OVERWRITE            1
 210 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 211 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 212
 213 /*
 214  * Memory map
 215  */
 216 #define CONFIG_SYS_MBAR                 0xf0000000
 217 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 218 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 219 #define CONFIG_SYS_SRAM_BASE            0xF1000000
 220 #define CONFIG_SYS_SRAM_SIZE            0x00200000
 221 #define CONFIG_SYS_LIME_BASE            0xE4000000
 222 #define CONFIG_SYS_LIME_SIZE            0x04000000
 223 #define CONFIG_SYS_FPGA_BASE            0xC0000000
 224 #define CONFIG_SYS_FPGA_SIZE            0x10000000
 225 #define CONFIG_SYS_MPEG_BASE            0xe2000000
 226 #define CONFIG_SYS_MPEG_SIZE            0x01000000
 227 #define CONFIG_SYS_CF_BASE              0xe1000000
 228 #define CONFIG_SYS_CF_SIZE              0x01000000
 229
 230 /* Use SRAM until RAM will be available */
 231 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 232 /* End of used area in DPRAM */
 233 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 234
 235 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 236                                          GENERATED_GBL_DATA_SIZE)
 237 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 238
 239 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 240 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 241 #   define CONFIG_SYS_RAMBOOT           1
 242 #endif
 243
 244 #define CONFIG_SYS_MONITOR_LEN  (384 << 10)  /* Reserve 384 kB for Monitor */
 245 #define CONFIG_SYS_MALLOC_LEN   (4 << 20)    /* Reserve 128 kB for malloc() */
 246 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)    /* Initial Memory map for Linux */
 247
 248 /*
 249  * Ethernet configuration
 250  */
 251 #define CONFIG_MPC5xxx_FEC              1
 252 #define CONFIG_MPC5xxx_FEC_MII100
 253 #define CONFIG_PHY_ADDR                 0x00
 254
 255 /*
 256  * GPIO configuration
 257  */
 258 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1d556624
 259
 260 /*
 261  * Miscellaneous configurable options
 262  */
 263 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 264 #ifdef CONFIG_CMD_KGDB
 265 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 266 #else
 267 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 268 #endif
 269 /* Print Buffer Size */
 270 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 271                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 272 /* max number of command args */
 273 #define CONFIG_SYS_MAXARGS              16
 274 /* Boot Argument Buffer Size */
 275 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 276
 277 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 278 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1...15 MB in DRAM */
 279
 280 #define CONFIG_SYS_LOAD_ADDR            0x100000 /* default load address */
 281
 282 /*
 283  * Various low-level settings
 284  */
 285 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 286 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 287
 288 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 289 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 290 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 291 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 292 #define CONFIG_SYS_CS1_START            CONFIG_SYS_SRAM_BASE
 293 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_SRAM_SIZE
 294 #define CONFIG_SYS_CS3_START            CONFIG_SYS_LIME_BASE
 295 #define CONFIG_SYS_CS3_SIZE             CONFIG_SYS_LIME_SIZE
 296 #define CONFIG_SYS_CS6_START            CONFIG_SYS_FPGA_BASE
 297 #define CONFIG_SYS_CS6_SIZE             CONFIG_SYS_FPGA_SIZE
 298 #define CONFIG_SYS_CS5_START            CONFIG_SYS_CF_BASE
 299 #define CONFIG_SYS_CS5_SIZE             CONFIG_SYS_CF_SIZE
 300 #define CONFIG_SYS_CS7_START            CONFIG_SYS_MPEG_BASE
 301 #define CONFIG_SYS_CS7_SIZE             CONFIG_SYS_MPEG_SIZE
 302
 303 #ifdef CONFIG_SYS_PCISPEED_66
 304 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 305 #define CONFIG_SYS_CS1_CFG              0x0004FB00
 306 #define CONFIG_SYS_CS2_CFG              0x0006F900
 307 #else
 308 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 309 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 310 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 311 #endif
 312
 313 /*
 314  * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
 315  * waitstates, writeswap and readswap enabled
 316  */
 317 #define CONFIG_SYS_CS3_CFG              0x00FFFB0C
 318 #define CONFIG_SYS_CS6_CFG              0x00FFFB0C
 319 #define CONFIG_SYS_CS7_CFG              0x4040751C
 320
 321 #define CONFIG_SYS_CS_BURST             0x00000000
 322 #define CONFIG_SYS_CS_DEADCYCLE         0x33330000
 323
 324 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 325
 326 /*-----------------------------------------------------------------------
 327  * USB stuff
 328  *-----------------------------------------------------------------------
 329  */
 330 #define CONFIG_USB_CLOCK                0x0001BBBB
 331 #define CONFIG_USB_CONFIG               0x00005000
 332
 333 /*-----------------------------------------------------------------------
 334  * IDE/ATA stuff Supports IDE harddisk
 335  *-----------------------------------------------------------------------
 336  */
 337 #define CONFIG_IDE_PREINIT
 338
 339 #define CONFIG_SYS_IDE_MAXBUS           1 /* max. 1 IDE bus */
 340 #define CONFIG_SYS_IDE_MAXDEVICE        2 /* max. 2 drives per IDE bus */
 341
 342 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 343
 344 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 345
 346 /* Offset for data I/O */
 347 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 348
 349 /* Offset for normal register accesses */
 350 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 351
 352 /* Offset for alternate registers */
 353 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 354
 355 /* Interval between registers */
 356 #define CONFIG_SYS_ATA_STRIDE           4
 357
 358 #endif /* __CONFIG_H */