include/configs/ipam390.h

   1 /*
   2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   3  * Based on:
   4  * U-Boot:include/configs/da850evm.h
   5  *
   6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   7  *
   8  * Based on davinci_dvevm.h. Original Copyrights follow:
   9  *
  10  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * Board
  20  */
  21 #define CONFIG_DRIVER_TI_EMAC
  22 #define CONFIG_BARIX_IPAM390
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  28 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  29 #define CONFIG_SYS_OSCIN_FREQ           24000000
  30 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  31 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  32 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  33
  34 /*
  35  * Memory Info
  36  */
  37 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  38 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  39 #define PHYS_SDRAM_1_SIZE       (128 << 20) /* SDRAM size 128MB */
  40 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  41
  42 /* memtest start addr */
  43 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  44
  45 /* memtest will be run on 16MB */
  46 #define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
  47
  48 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  49
  50 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  51         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  52         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  53         DAVINCI_SYSCFG_SUSPSRC_UART0 |          \
  54         DAVINCI_SYSCFG_SUSPSRC_EMAC)
  55
  56 /*
  57  * PLL configuration
  58  */
  59 #define CONFIG_SYS_DV_CLKMODE          0
  60 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  61 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  62 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  63 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  64 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  65 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  66 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  67 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  68
  69 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  70 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  71 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  72 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  73
  74 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  75 #define CONFIG_SYS_DA850_PLL1_PLLM     24
  76
  77 /*
  78  * DDR2 memory configuration
  79  */
  80 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  81                                         DV_DDR_PHY_EXT_STRBEN | \
  82                                         (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  83 #define CONFIG_SYS_DA850_DDR2_SDRCR     0x00000498
  84
  85 #define CONFIG_SYS_DA850_DDR2_SDBCR2    0x00000004
  86 #define CONFIG_SYS_DA850_DDR2_PBBPR     0x00000020
  87
  88 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
  89         (13 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
  90         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
  91         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
  92         (2 << DV_DDR_SDTMR1_WR_SHIFT) |         \
  93         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
  94         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
  95         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
  96         (1 << DV_DDR_SDTMR1_WTR_SHIFT))
  97
  98 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
  99         (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 100         (2 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 101         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 102         (14 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 103         (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |    \
 104         (1 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 105         (2 << DV_DDR_SDTMR2_CKE_SHIFT))
 106
 107 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 108         (1 << DV_DDR_SDCR_DDR2EN_SHIFT) |       \
 109         (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |    \
 110         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 111         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 112         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 113         (2 << DV_DDR_SDCR_CL_SHIFT) |   \
 114         (3 << DV_DDR_SDCR_IBANK_SHIFT) |        \
 115         (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 116
 117 #define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
 118                                 DAVINCI_ABCR_WSTROBE(2) | \
 119                                 DAVINCI_ABCR_WHOLD(0)   | \
 120                                 DAVINCI_ABCR_RSETUP(1)  | \
 121                                 DAVINCI_ABCR_RSTROBE(2) | \
 122                                 DAVINCI_ABCR_RHOLD(1)   | \
 123                                 DAVINCI_ABCR_TA(0)      | \
 124                                 DAVINCI_ABCR_ASIZE_8BIT)
 125
 126 /*
 127  * Serial Driver info
 128  */
 129 #define CONFIG_SYS_NS16550_SERIAL
 130 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 131 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
 132 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 133 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 134
 135 /*
 136  * Flash & Environment
 137  */
 138 #define CONFIG_NAND_DAVINCI
 139 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 140 #define CONFIG_ENV_SIZE                 (128 << 10)
 141 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 142 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 143 #define CONFIG_SYS_NAND_PAGE_2K
 144 #define CONFIG_SYS_NAND_CS              3
 145 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 146 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 147 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 148 #undef CONFIG_SYS_NAND_HW_ECC
 149 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 150 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 151 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
 152 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 153 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 154 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 155 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 156 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x120000
 157 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 158 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 159 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 160                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 161                                         CONFIG_SYS_MALLOC_LEN -       \
 162                                         GENERATED_GBL_DATA_SIZE)
 163 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 164                         6,   7,  8,  9, 10,     11, 12, 13, 14, 15,     \
 165                         22, 23, 24, 25, 26,     27, 28, 29, 30, 31,     \
 166                         38, 39, 40, 41, 42,     43, 44, 45, 46, 47,     \
 167                         54, 55, 56, 57, 58,     59, 60, 61, 62, 63}
 168 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 169 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 170 #define CONFIG_SYS_NAND_ECCSIZE         512
 171 #define CONFIG_SYS_NAND_ECCBYTES        10
 172 #define CONFIG_SYS_NAND_OOBSIZE         64
 173 #define CONFIG_SPL_NAND_BASE
 174 #define CONFIG_SPL_NAND_DRIVERS
 175 #define CONFIG_SPL_NAND_ECC
 176 #define CONFIG_SPL_NAND_LOAD
 177
 178 /*
 179  * Network & Ethernet Configuration
 180  */
 181 #ifdef CONFIG_DRIVER_TI_EMAC
 182 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 183 #define CONFIG_BOOTP_DEFAULT
 184 #define CONFIG_BOOTP_DNS
 185 #define CONFIG_BOOTP_DNS2
 186 #define CONFIG_BOOTP_SEND_HOSTNAME
 187 #define CONFIG_NET_RETRY_COUNT  10
 188 #endif
 189
 190 /*
 191  * U-Boot general configuration
 192  */
 193 #define CONFIG_MISC_INIT_R
 194 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 195 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 196 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 197 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 198 #define CONFIG_AUTO_COMPLETE
 199 #define CONFIG_CMDLINE_EDITING
 200 #define CONFIG_SYS_LONGHELP
 201 #define CONFIG_MX_CYCLIC
 202
 203 /*
 204  * Linux Information
 205  */
 206 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 207 #define CONFIG_HWCONFIG         /* enable hwconfig */
 208 #define CONFIG_CMDLINE_TAG
 209 #define CONFIG_REVISION_TAG
 210 #define CONFIG_SETUP_MEMORY_TAGS
 211 #define CONFIG_EXTRA_ENV_SETTINGS \
 212         "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
 213                 "root=/dev/mtdblock5 rw noinitrd " \
 214                 "rootfstype=jffs2 noinitrd\0" \
 215         "hwconfig=dsp:wake=yes\0" \
 216         "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
 217         "bootfile=uImage\0" \
 218         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"      \
 219         "mtddevname=uboot-env\0" \
 220         "mtddevnum=0\0" \
 221         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
 222         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
 223         "u-boot=/tftpboot/ipam390/u-boot.ais\0"                 \
 224         "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
 225                 "nand write c0000000 20000 ${filesize}\0"       \
 226         "setbootparms=nand read c0100000 200000 400000;"        \
 227                 "run defbootargs addmtd;"                       \
 228                 "spl export atags c0100000;"                    \
 229                 "nand erase.part bootparms;"                    \
 230                 "nand write c0000100 180000 20000\0"            \
 231         "\0"
 232
 233 #ifdef CONFIG_CMD_BDI
 234 #define CONFIG_CLOCKS
 235 #endif
 236
 237 #ifndef CONFIG_DRIVER_TI_EMAC
 238 #endif
 239
 240 #define CONFIG_MTD_DEVICE
 241 #define CONFIG_MTD_PARTITIONS
 242
 243 /* defines for SPL */
 244 #define CONFIG_SPL_FRAMEWORK
 245 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 246                                                 CONFIG_SYS_MALLOC_LEN)
 247 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 248 #define CONFIG_SPL_STACK        0x8001ff00
 249 #define CONFIG_SPL_TEXT_BASE    0x80000000
 250 #define CONFIG_SPL_MAX_SIZE     0x20000
 251 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 252
 253 /* additions for new relocation code, must added to all boards */
 254 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 255
 256 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 257                                         GENERATED_GBL_DATA_SIZE)
 258
 259 /* add FALCON boot mode */
 260 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
 261 #define CONFIG_SYS_SPL_ARGS_ADDR        LINUX_BOOT_PARAM_ADDR
 262
 263 /* GPIO support */
 264 #define CONFIG_DA8XX_GPIO
 265 #define CONFIG_IPAM390_GPIO_BOOTMODE    ((16 * 7) + 14)
 266
 267 #define CONFIG_SHOW_BOOT_PROGRESS
 268 #define CONFIG_IPAM390_GPIO_LED_RED     ((16 * 7) + 11)
 269 #define CONFIG_IPAM390_GPIO_LED_GREEN   ((16 * 7) + 12)
 270
 271 #include <asm/arch/hardware.h>
 272
 273 #endif /* __CONFIG_H */