include/configs/imx8qm_mek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8QM_MEK_H
   7 #define __IMX8QM_MEK_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #ifdef CONFIG_SPL_BUILD
  14 #define CONFIG_SPL_MAX_SIZE                             (124 * 1024)
  15 #define CONFIG_SYS_MONITOR_LEN                          (1024 * 1024)
  16 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  17 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0x800
  18
  19 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  20 #define CONFIG_SPL_STACK                0x013E000
  21 #define CONFIG_SPL_BSS_START_ADDR       0x00128000
  22 #define CONFIG_SPL_BSS_MAX_SIZE         0x1000  /* 4 KB */
  23 #define CONFIG_SYS_SPL_MALLOC_START     0x00120000
  24 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x3000  /* 12 KB */
  25 #define CONFIG_SERIAL_LPUART_BASE       0x5a060000
  26 #define CONFIG_MALLOC_F_ADDR            0x00120000
  27
  28 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
  29
  30 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  31
  32 #define CONFIG_OF_EMBED
  33 #endif
  34
  35 #define CONFIG_REMAKE_ELF
  36
  37 /* Flat Device Tree Definitions */
  38 #define CONFIG_OF_BOARD_SETUP
  39
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  41 #define USDHC1_BASE_ADDR                0x5B010000
  42 #define USDHC2_BASE_ADDR                0x5B020000
  43 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  44
  45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  46
  47 #ifdef CONFIG_AHAB_BOOT
  48 #define AHAB_ENV "sec_boot=yes\0"
  49 #else
  50 #define AHAB_ENV "sec_boot=no\0"
  51 #endif
  52
  53 /* Initial environment variables */
  54 #define CONFIG_EXTRA_ENV_SETTINGS               \
  55         AHAB_ENV \
  56         "script=boot.scr\0" \
  57         "image=Image\0" \
  58         "panel=NULL\0" \
  59         "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
  60         "fdt_addr=0x83000000\0"                 \
  61         "fdt_high=0xffffffffffffffff\0"         \
  62         "boot_fdt=try\0" \
  63         "fdt_file=undefined\0" \
  64         "initrd_addr=0x83800000\0"              \
  65         "initrd_high=0xffffffffffffffff\0" \
  66         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  67         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  68         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  69         "mmcautodetect=yes\0" \
  70         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  71         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  72         "bootscript=echo Running bootscript from mmc ...; " \
  73                 "source\0" \
  74         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  75         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  76         "boot_os=booti ${loadaddr} - ${fdt_addr};\0" \
  77         "loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
  78         "auth_os=auth_cntr ${cntr_addr}\0" \
  79         "mmcboot=echo Booting from mmc ...; " \
  80                 "run mmcargs; " \
  81                 "if test ${sec_boot} = yes; then " \
  82                         "if run auth_os; then " \
  83                                 "run boot_os; " \
  84                         "else " \
  85                                 "echo ERR: failed to authenticate; " \
  86                         "fi; " \
  87                 "else " \
  88                         "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  89                                 "if run loadfdt; then " \
  90                                         "run boot_os; " \
  91                                 "else " \
  92                                         "echo WARN: Cannot load the DT; " \
  93                                 "fi; " \
  94                         "else " \
  95                                 "echo wait for boot; " \
  96                         "fi;" \
  97                 "fi;\0" \
  98         "netargs=setenv bootargs console=${console} " \
  99                 "root=/dev/nfs " \
 100                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 101         "netboot=echo Booting from net ...; " \
 102                 "run netargs;  " \
 103                 "if test ${ip_dyn} = yes; then " \
 104                         "setenv get_cmd dhcp; " \
 105                 "else " \
 106                         "setenv get_cmd tftp; " \
 107                 "fi; " \
 108                 "if test ${sec_boot} = yes; then " \
 109                         "${get_cmd} ${cntr_addr} ${cntr_file}; " \
 110                         "if run auth_os; then " \
 111                                 "run boot_os; " \
 112                         "else " \
 113                                 "echo ERR: failed to authenticate; " \
 114                         "fi; " \
 115                 "else " \
 116                         "${get_cmd} ${loadaddr} ${image}; " \
 117                         "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 118                                 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 119                                         "booti ${loadaddr} - ${fdt_addr}; " \
 120                                 "else " \
 121                                         "echo WARN: Cannot load the DT; " \
 122                                 "fi; " \
 123                         "else " \
 124                                 "booti; " \
 125                         "fi;" \
 126                 "fi;\0"
 127
 128 #define CONFIG_BOOTCOMMAND \
 129            "mmc dev ${mmcdev}; if mmc rescan; then " \
 130                    "if run loadbootscript; then " \
 131                            "run bootscript; " \
 132                    "else " \
 133                            "if test ${sec_boot} = yes; then " \
 134                                    "if run loadcntr; then " \
 135                                            "run mmcboot; " \
 136                                    "else run netboot; " \
 137                                    "fi; " \
 138                             "else " \
 139                                    "if run loadimage; then " \
 140                                            "run mmcboot; " \
 141                                    "else run netboot; " \
 142                                    "fi; " \
 143                          "fi; " \
 144                    "fi; " \
 145            "else booti ${loadaddr} - ${fdt_addr}; fi"
 146
 147 /* Link Definitions */
 148
 149 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 150
 151 /* Default environment is in SD */
 152
 153 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 154
 155 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
 156 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 157 #define CONFIG_SYS_FSL_USDHC_NUM        2
 158
 159 /* Size of malloc() pool */
 160 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 161
 162 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 163 #define PHYS_SDRAM_1                    0x80000000
 164 #define PHYS_SDRAM_2                    0x880000000
 165 #define PHYS_SDRAM_1_SIZE               0x80000000      /* 2 GB */
 166 #define PHYS_SDRAM_2_SIZE               0x100000000     /* 4 GB */
 167
 168 /* Generic Timer Definitions */
 169 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
 170
 171 /* Networking */
 172 #define CONFIG_FEC_XCV_TYPE             RGMII
 173
 174 #endif /* __IMX8QM_MEK_H */