include/configs/imx8mq_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8M_EVK_H
   7 #define __IMX8M_EVK_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_BOOTM_LEN            (32 * SZ_1M)
  14
  15 #define CONFIG_SPL_MAX_SIZE             (124 * 1024)
  16 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  17 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  18 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
  19
  20 #ifdef CONFIG_SPL_BUILD
  21 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
  22 #define CONFIG_SPL_WATCHDOG
  23 #define CONFIG_SPL_DRIVERS_MISC
  24 #define CONFIG_SPL_POWER
  25 #define CONFIG_SPL_I2C
  26 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  27 #define CONFIG_SPL_STACK                0x187FF0
  28 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  29 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  30 #define CONFIG_SPL_GPIO
  31 #define CONFIG_SPL_MMC_SUPPORT
  32 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
  33 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000   /* 8 KB */
  34 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
  35 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
  36 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  37
  38 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  39 #define CONFIG_MALLOC_F_ADDR            0x182000
  40 /* For RAW image gives a error info not panic */
  41 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  42
  43 #undef CONFIG_DM_MMC
  44 #undef CONFIG_DM_PMIC
  45 #undef CONFIG_DM_PMIC_PFUZE100
  46
  47 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  48
  49 #define CONFIG_POWER
  50 #define CONFIG_POWER_I2C
  51 #define CONFIG_POWER_PFUZE100
  52 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
  53 #endif
  54
  55 #define CONFIG_REMAKE_ELF
  56
  57 /* ENET Config */
  58 /* ENET1 */
  59 #if defined(CONFIG_CMD_NET)
  60 #define CONFIG_MII
  61 #define CONFIG_ETHPRIME                 "FEC"
  62
  63 #define CONFIG_FEC_MXC
  64 #define CONFIG_FEC_XCV_TYPE             RGMII
  65 #define CONFIG_FEC_MXC_PHYADDR          0
  66 #define FEC_QUIRK_ENET_MAC
  67
  68 #define CONFIG_PHY_GIGE
  69 #define IMX_FEC_BASE                    0x30BE0000
  70 #endif
  71
  72 #ifndef CONFIG_SPL_BUILD
  73 #define BOOT_TARGET_DEVICES(func) \
  74        func(MMC, mmc, 0) \
  75        func(MMC, mmc, 1) \
  76        func(DHCP, dhcp, na)
  77
  78 #include <config_distro_bootcmd.h>
  79 #endif
  80
  81 /* Initial environment variables */
  82 #define CONFIG_EXTRA_ENV_SETTINGS               \
  83         BOOTENV \
  84         "scriptaddr=0x43500000\0" \
  85         "kernel_addr_r=0x40880000\0" \
  86         "image=Image\0" \
  87         "console=ttymxc0,115200\0" \
  88         "fdt_addr=0x43000000\0"                 \
  89         "boot_fdt=try\0" \
  90         "fdt_file=imx8mq-evk.dtb\0" \
  91         "initrd_addr=0x43800000\0"              \
  92         "bootm_size=0x10000000\0" \
  93         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  94         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  95
  96 /* Link Definitions */
  97 #define CONFIG_SYS_LOAD_ADDR                    0x40480000
  98
  99 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 100 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
 101 #define CONFIG_SYS_INIT_SP_OFFSET \
 102         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 103 #define CONFIG_SYS_INIT_SP_ADDR \
 104         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 105
 106 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 107
 108 /* Size of malloc() pool */
 109 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
 110
 111 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 112 #define PHYS_SDRAM                      0x40000000
 113 #define PHYS_SDRAM_SIZE                 0xC0000000 /* 3GB DDR */
 114
 115 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
 116
 117 /* Monitor Command Prompt */
 118 #undef CONFIG_SYS_PROMPT
 119 #define CONFIG_SYS_PROMPT               "u-boot=> "
 120 #define CONFIG_SYS_CBSIZE               1024
 121 #define CONFIG_SYS_MAXARGS              64
 122 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 123 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 124                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 125
 126 #define CONFIG_IMX_BOOTAUX
 127
 128 #define CONFIG_SYS_FSL_USDHC_NUM        2
 129 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 130
 131 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 132
 133 #define CONFIG_MXC_GPIO
 134
 135 #define CONFIG_OF_SYSTEM_SETUP
 136
 137 #ifndef CONFIG_SPL_BUILD
 138 #define CONFIG_DM_PMIC
 139 #endif
 140
 141 #endif