include/configs/imx8mq_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8M_EVK_H
   7 #define __IMX8M_EVK_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_BOOTM_LEN            (64 * SZ_1M)
  14
  15 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
  19 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
  20 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
  21 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  22
  23 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  24 #define CONFIG_MALLOC_F_ADDR            0x182000
  25 /* For RAW image gives a error info not panic */
  26 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  27
  28 #define CONFIG_POWER_PFUZE100
  29 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
  30 #endif
  31
  32 /* ENET Config */
  33 /* ENET1 */
  34 #if defined(CONFIG_CMD_NET)
  35 #define CONFIG_FEC_MXC_PHYADDR          0
  36 #endif
  37
  38 #ifndef CONFIG_SPL_BUILD
  39 #define BOOT_TARGET_DEVICES(func) \
  40        func(MMC, mmc, 0) \
  41        func(MMC, mmc, 1) \
  42        func(DHCP, dhcp, na)
  43
  44 #include <config_distro_bootcmd.h>
  45 #endif
  46
  47 /* Initial environment variables */
  48 #define CONFIG_EXTRA_ENV_SETTINGS               \
  49         BOOTENV \
  50         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  51         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  52         "image=Image\0" \
  53         "console=ttymxc0,115200\0" \
  54         "fdt_addr_r=0x43000000\0"                       \
  55         "boot_fdt=try\0" \
  56         "fdtfile=imx8mq-evk.dtb\0" \
  57         "initrd_addr=0x43800000\0"              \
  58         "bootm_size=0x10000000\0" \
  59         "mmcpart=1\0" \
  60         "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
  61
  62 /* Link Definitions */
  63
  64 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  65 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
  66
  67
  68 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  69 #define PHYS_SDRAM                      0x40000000
  70 #define PHYS_SDRAM_SIZE                 0xC0000000 /* 3GB DDR */
  71
  72 #define CONFIG_MXC_UART_BASE            UART_BASE_ADDR(1)
  73
  74 #define CONFIG_SYS_FSL_USDHC_NUM        2
  75 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  76
  77 #endif