include/configs/imx8mp_venice.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2022 Gateworks Corporation
   4  */
   5
   6 #ifndef __IMX8MP_VENICE_H
   7 #define __IMX8MP_VENICE_H
   8
   9 #include <asm/arch/imx-regs.h>
  10 #include <linux/sizes.h>
  11
  12 #define CONFIG_SYS_MONITOR_LEN          SZ_512K
  13 #define CONFIG_SYS_UBOOT_BASE   \
  14         (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
  15
  16 #ifdef CONFIG_SPL_BUILD
  17 #define CONFIG_SPL_STACK                0x960000
  18 #define CONFIG_SPL_BSS_START_ADDR       0x0098FC00
  19 #define CONFIG_SPL_BSS_MAX_SIZE         0x400   /* 1 KB */
  20 #define CONFIG_SYS_SPL_MALLOC_START     0x42200000
  21 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_512K /* 512 KB */
  22
  23 /* For RAW image gives a error info not panic */
  24 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  25 #endif
  26
  27 #define MEM_LAYOUT_ENV_SETTINGS \
  28         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  29         "fdt_addr_r=0x50200000\0" \
  30         "scriptaddr=0x50280000\0" \
  31         "ramdisk_addr_r=0x50300000\0" \
  32         "kernel_comp_addr_r=0x40200000\0"
  33
  34 /* Enable Distro Boot */
  35 #ifndef CONFIG_SPL_BUILD
  36 #define BOOT_TARGET_DEVICES(func) \
  37         func(MMC, mmc, 1) \
  38         func(MMC, mmc, 2) \
  39         func(USB, usb, 0) \
  40         func(DHCP, dhcp, na)
  41 #include <config_distro_bootcmd.h>
  42 #else
  43 #define BOOTENV
  44 #endif
  45
  46 /* Initial environment variables */
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         BOOTENV \
  49         MEM_LAYOUT_ENV_SETTINGS \
  50         "script=boot.scr\0" \
  51         "bootm_size=0x10000000\0" \
  52         "dev=2\0" \
  53         "preboot=gsc wd-disable\0" \
  54         "console=ttymxc1,115200\0" \
  55         "update_firmware=" \
  56                 "tftpboot $loadaddr $image && " \
  57                 "setexpr blkcnt $filesize + 0x1ff && " \
  58                 "setexpr blkcnt $blkcnt / 0x200 && " \
  59                 "mmc dev $dev && " \
  60                 "mmc write $loadaddr 0x40 $blkcnt\0" \
  61         "loadfdt=" \
  62                 "if $fsload $fdt_addr_r $dir/$fdt_file1; " \
  63                         "then echo loaded $fdt_file1; " \
  64                 "elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
  65                         "then echo loaded $fdt_file2; " \
  66                 "elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
  67                         "then echo loaded $fdt_file3; " \
  68                 "elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
  69                         "then echo loaded $fdt_file4; " \
  70                 "elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
  71                         "then echo loaded $fdt_file5; " \
  72                 "fi\0" \
  73         "boot_net=" \
  74                 "setenv fsload tftpboot; " \
  75                 "run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
  76                 "booti $kernel_addr_r - $fdt_addr_r\0" \
  77         "update_rootfs=" \
  78                 "tftpboot $loadaddr $image && " \
  79                 "gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
  80         "update_all=" \
  81                 "tftpboot $loadaddr $image && " \
  82                 "gzwrite mmc $dev $loadaddr $filesize\0" \
  83         "erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
  84
  85 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  86 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
  87 #define CONFIG_SYS_INIT_SP_OFFSET \
  88         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  89 #define CONFIG_SYS_INIT_SP_ADDR \
  90         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  91
  92 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  93
  94 /* SDRAM configuration */
  95 #define PHYS_SDRAM                      0x40000000
  96 #define PHYS_SDRAM_SIZE                 SZ_4G
  97 #define CONFIG_SYS_BOOTM_LEN            SZ_256M
  98
  99 /* UART */
 100 #define CONFIG_MXC_UART_BASE            UART2_BASE_ADDR
 101
 102 /* FEC */
 103 #define FEC_QUIRK_ENET_MAC
 104
 105 #endif