Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
[platform/kernel/u-boot.git] / include / configs / imx8mn_evk.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2018 NXP
4  */
5
6 #ifndef __IMX8MN_EVK_H
7 #define __IMX8MN_EVK_H
8
9 #include <linux/sizes.h>
10 #include <linux/stringify.h>
11 #include <asm/arch/imx-regs.h>
12
13 #define CONFIG_SYS_BOOTM_LEN            (32 * SZ_1M)
14
15 #define CONFIG_SYS_MONITOR_LEN          SZ_512K
16 #define CONFIG_SYS_UBOOT_BASE   \
17         (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
18
19 #ifdef CONFIG_SPL_BUILD
20 #define CONFIG_SPL_STACK                0x980000
21 #define CONFIG_SPL_BSS_START_ADDR       0x950000
22 #define CONFIG_SYS_SPL_MALLOC_START     0x42200000
23 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_512K /* 512 KB */
24
25 /* For RAW image gives a error info not panic */
26 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
27
28 #endif
29
30 #ifndef CONFIG_SPL_BUILD
31 #define BOOT_TARGET_DEVICES(func) \
32         func(MMC, mmc, 1) \
33         func(MMC, mmc, 2) \
34         func(DHCP, dhcp, na)
35
36 #include <config_distro_bootcmd.h>
37 #endif
38
39 /* Initial environment variables */
40 /* see include/configs/ti_armv7_common.h */
41 #define ENV_MEM_LAYOUT_SETTINGS \
42         "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
43         "kernel_addr_r=0x42000000\0" \
44         "fdt_addr_r=0x48000000\0" \
45         "fdtoverlay_addr_r=0x49000000\0" \
46         "ramdisk_addr_r=0x48080000\0" \
47         "initrd_addr=0x48080000\0" \
48         "scriptaddr=0x40000000\0" \
49         "pxefile_addr_r=0x40100000\0"
50
51 #define CONFIG_EXTRA_ENV_SETTINGS               \
52         "image=Image\0" \
53         BOOTENV \
54         "console=ttymxc1,115200\0" \
55         "boot_fit=no\0" \
56         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
57         "bootm_size=0x10000000\0" \
58         "mmcpart=1\0" \
59         "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
60         ENV_MEM_LAYOUT_SETTINGS
61
62 /* Link Definitions */
63
64 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
65 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
66 #define CONFIG_SYS_INIT_SP_OFFSET \
67         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
68 #define CONFIG_SYS_INIT_SP_ADDR \
69         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
70
71
72 #define CONFIG_SYS_SDRAM_BASE           0x40000000
73 #define PHYS_SDRAM                      0x40000000
74 #define PHYS_SDRAM_SIZE                 0x80000000 /* 2GB DDR */
75
76 #define CONFIG_MXC_UART_BASE            UART_BASE_ADDR(2)
77
78 #endif