include/configs/imx27lite-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
   4  *
   5  * based on:
   6  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
   7  */
   8
   9 #ifndef __IMX27LITE_COMMON_CONFIG_H
  10 #define __IMX27LITE_COMMON_CONFIG_H
  11
  12 /*
  13  * SoC Configuration
  14  */
  15 #define CONFIG_MX27
  16 #define CONFIG_MX27_CLK32       32768           /* OSC32K frequency */
  17
  18 /*
  19  * Lowlevel configuration
  20  */
  21 #define SDRAM_ESDCFG_REGISTER_VAL(cas)  \
  22                 (ESDCFG_TRC(10) |       \
  23                 ESDCFG_TRCD(3) |        \
  24                 ESDCFG_TCAS(cas) |      \
  25                 ESDCFG_TRRD(1) |        \
  26                 ESDCFG_TRAS(5) |        \
  27                 ESDCFG_TWR |            \
  28                 ESDCFG_TMRD(2) |        \
  29                 ESDCFG_TRP(2) |         \
  30                 ESDCFG_TXP(3))
  31
  32 #define SDRAM_ESDCTL_REGISTER_VAL       \
  33                 (ESDCTL_PRCT(0) |       \
  34                  ESDCTL_BL |            \
  35                  ESDCTL_PWDT(0) |       \
  36                  ESDCTL_SREFR(3) |      \
  37                  ESDCTL_DSIZ_32 |       \
  38                  ESDCTL_COL10 |         \
  39                  ESDCTL_ROW13 |         \
  40                  ESDCTL_SDE)
  41
  42 #define SDRAM_ALL_VAL           0xf00
  43
  44 #define SDRAM_MODE_REGISTER_VAL 0x33    /* BL: 8, CAS: 3 */
  45 #define SDRAM_EXT_MODE_REGISTER_VAL     0x1000000
  46
  47 #define MPCTL0_VAL      0x1ef15d5
  48
  49 #define SPCTL0_VAL      0x043a1c09
  50
  51 #define CSCR_VAL        0x33f08107
  52
  53 #define PCDR0_VAL       0x120470c3
  54 #define PCDR1_VAL       0x03030303
  55 #define PCCR0_VAL       0xffffffff
  56 #define PCCR1_VAL       0xfffffffc
  57
  58 #define AIPI1_PSR0_VAL  0x20040304
  59 #define AIPI1_PSR1_VAL  0xdffbfcfb
  60 #define AIPI2_PSR0_VAL  0x07ffc200
  61 #define AIPI2_PSR1_VAL  0xffffffff
  62
  63 /*
  64  * Memory Info
  65  */
  66 /* memtest start address */
  67 #define PHYS_SDRAM_1            0xA0000000      /* DDR Start */
  68 #define PHYS_SDRAM_1_SIZE       0x08000000      /* DDR size 128MB */
  69
  70 /*
  71  * Serial Driver info
  72  */
  73 #define CONFIG_MXC_UART_BASE    UART_BASE_ADDR(1)
  74
  75 /*
  76  * Flash & Environment
  77  */
  78 /* Use buffered writes (~10x faster) */
  79 /* Use hardware sector protection */
  80 /* CS2 Base address */
  81 #define PHYS_FLASH_1                    0xc0000000
  82 /* Flash Base for U-Boot */
  83 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
  84 #define CONFIG_SYS_MAX_FLASH_SECT       (PHYS_FLASH_SIZE / \
  85                 CONFIG_SYS_FLASH_SECT_SZ)
  86 #define CONFIG_SYS_MONITOR_LEN          0x40000         /* Reserve 256KiB */
  87 /* Address and size of Redundant Environment Sector     */
  88
  89 /*
  90  * Ethernet
  91  */
  92 #define CONFIG_FEC_MXC_PHYADDR          0x1f
  93
  94 /*
  95  * MTD
  96  */
  97
  98 /*
  99  * NAND
 100  */
 101 #define CONFIG_MXC_NAND_REGS_BASE       0xd8000000
 102 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 103 #define CONFIG_SYS_NAND_BASE            0xd8000000
 104 #define CONFIG_MXC_NAND_HWECC
 105
 106 /*
 107  * U-Boot general configuration
 108  */
 109 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 110         "netdev=eth0\0"                                                 \
 111         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 112                 "nfsroot=${serverip}:${rootpath}\0"                     \
 113         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 114         "addip=setenv bootargs ${bootargs} "                            \
 115                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 116                 ":${hostname}:${netdev}:off panic=1\0"                  \
 117         "addtty=setenv bootargs ${bootargs}"                            \
 118                 " console=ttymxc0,${baudrate}\0"                        \
 119         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 120         "addmisc=setenv bootargs ${bootargs}\0"                         \
 121         "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
 122         "kernel_addr_r=a0800000\0"                                      \
 123         "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
 124         "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
 125         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 126                 "run nfsargs addip addtty addmtd addmisc;"              \
 127                 "bootm\0"                                               \
 128         "bootcmd=run net_nfs\0"                                         \
 129         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 130         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 131                 " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
 132                 " +${filesize};cp.b ${fileaddr} "                       \
 133                 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
 134         "upd=run load update\0"                                         \
 135
 136 /* additions for new relocation code, must be added to all boards */
 137 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 138 #endif /* __IMX27LITE_COMMON_CONFIG_H */