include/configs/h2200.h

   1 /*
   2  * iPAQ h2200 board configuration
   3  *
   4  * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_MACH_TYPE                MACH_TYPE_H2200
  13
  14 #define CONFIG_CPU_PXA25X               1
  15
  16 #define CONFIG_NR_DRAM_BANKS            1
  17 #define PHYS_SDRAM_1                    0xa0000000 /* SDRAM Bank #1 */
  18 #define PHYS_SDRAM_1_SIZE               0x04000000 /* 64 MB */
  19
  20 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  21 #define CONFIG_SYS_SDRAM_SIZE           PHYS_SDRAM_1_SIZE
  22
  23 #define CONFIG_SYS_INIT_SP_ADDR         0xfffff800
  24
  25 #define CONFIG_ENV_SIZE                 0x00040000
  26 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128*1024)
  27
  28 #define CONFIG_SYS_LOAD_ADDR            0xa3000000 /* default load address */
  29
  30 /*
  31  * iPAQ 1st stage bootloader loads 2nd stage bootloader
  32  * at address 0xa0040000 but bootloader requires header
  33  * which is 0x1000 long.
  34  *
  35  * --- Header begin ---
  36  *      .word 0xea0003fe ; b 0x1000
  37  *
  38  *      .org 0x40
  39  *      .ascii "ECEC"
  40  *
  41  *      .org 0x1000
  42  * --- Header end ---
  43  */
  44
  45 /*
  46  * Static chips
  47  */
  48
  49 #define CONFIG_SYS_MSC0_VAL             0x246c7ffc
  50 #define CONFIG_SYS_MSC1_VAL             0x7ff07ff0
  51 #define CONFIG_SYS_MSC2_VAL             0x7ff07ff0
  52
  53 /*
  54  * PCMCIA and CF Interfaces
  55  */
  56
  57 #define CONFIG_SYS_MECR_VAL             0x00000000
  58 #define CONFIG_SYS_MCMEM0_VAL           0x00000000
  59 #define CONFIG_SYS_MCMEM1_VAL           0x00000000
  60 #define CONFIG_SYS_MCATT0_VAL           0x00000000
  61 #define CONFIG_SYS_MCATT1_VAL           0x00000000
  62 #define CONFIG_SYS_MCIO0_VAL            0x00000000
  63 #define CONFIG_SYS_MCIO1_VAL            0x00000000
  64
  65 #define CONFIG_SYS_FLYCNFG_VAL          0x00000000
  66 #define CONFIG_SYS_SXCNFG_VAL           0x00040004
  67
  68 #define CONFIG_SYS_MDREFR_VAL           0x0099E018
  69 #define CONFIG_SYS_MDCNFG_VAL           0x01C801CB
  70 #define CONFIG_SYS_MDMRS_VAL            0x00220022
  71
  72 #define CONFIG_SYS_PSSR_VAL             0x00000000
  73 #define CONFIG_SYS_CKEN                 0x00004840
  74 #define CONFIG_SYS_CCCR                 0x00000161
  75
  76 /*
  77  * GPIOs
  78  */
  79
  80 #define CONFIG_SYS_GPSR0_VAL            0x01000000
  81 #define CONFIG_SYS_GPSR1_VAL            0x00000000
  82 #define CONFIG_SYS_GPSR2_VAL            0x00010000
  83
  84 #define CONFIG_SYS_GPCR0_VAL            0x00000000
  85 #define CONFIG_SYS_GPCR1_VAL            0x00000000
  86 #define CONFIG_SYS_GPCR2_VAL            0x00000000
  87
  88 #define CONFIG_SYS_GPDR0_VAL            0xF7E38C00
  89 #define CONFIG_SYS_GPDR1_VAL            0xBCFFBF83
  90 #define CONFIG_SYS_GPDR2_VAL            0x000157FF
  91
  92 #define CONFIG_SYS_GAFR0_L_VAL          0x80401000
  93 #define CONFIG_SYS_GAFR0_U_VAL          0x00000112
  94 #define CONFIG_SYS_GAFR1_L_VAL          0x600A9550
  95 #define CONFIG_SYS_GAFR1_U_VAL          0x0005AAAA
  96 #define CONFIG_SYS_GAFR2_L_VAL          0x20000000
  97 #define CONFIG_SYS_GAFR2_U_VAL          0x00000000
  98
  99 /*
 100  * Serial port
 101  */
 102 #define CONFIG_FFUART
 103 #define CONFIG_CONS_INDEX               3
 104
 105 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 38400, 115200 }
 106
 107 #define CONFIG_SETUP_MEMORY_TAGS
 108 #define CONFIG_CMDLINE_TAG
 109 #define CONFIG_INITRD_TAG
 110
 111 /* Monitor Command Prompt */
 112
 113 #define CONFIG_USB_DEV_PULLUP_GPIO      33
 114 /* USB VBUS GPIO 3 */
 115
 116 #define CONFIG_BOOTCOMMAND              \
 117         "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
 118         "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
 119         "source :script ; " \
 120         "bootm ; "
 121
 122 #define CONFIG_USB_GADGET_PXA2XX
 123 #define CONFIG_USB_ETH_SUBSET
 124
 125 #define CONFIG_USBNET_DEV_ADDR          "de:ad:be:ef:00:01"
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "stdin=serial\0" \
 128         "stdout=serial\0" \
 129         "stderr=serial\0"
 130
 131 #endif /* __CONFIG_H */