include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 /* Location in NAND to read U-Boot from */
  12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  13
  14 /* Falcon Mode */
  15 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  16
  17 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  18 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  19
  20 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  23 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  24
  25 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  26 #include "mx6_common.h"
  27
  28 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  29
  30 /* Serial ATAG */
  31 #define CONFIG_SERIAL_TAG
  32
  33 /* Size of malloc() pool */
  34 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  35
  36 /* Init Functions */
  37 #define CONFIG_MISC_INIT_R
  38
  39 /* Driver Model */
  40 #ifndef CONFIG_SPL_BUILD
  41 #define CONFIG_DM_GPIO
  42 #define CONFIG_DM_THERMAL
  43 #endif
  44
  45 /* Thermal */
  46 #define CONFIG_IMX_THERMAL
  47
  48 /* Serial */
  49 #define CONFIG_MXC_UART
  50 #define CONFIG_MXC_UART_BASE           UART2_BASE
  51
  52 #ifdef CONFIG_SPI_FLASH
  53
  54 /* SPI */
  55 #ifdef CONFIG_CMD_SF
  56   #define CONFIG_SPI_FLASH_MTD
  57   #define CONFIG_SPI_FLASH_BAR
  58   #define CONFIG_SF_DEFAULT_BUS              0
  59   #define CONFIG_SF_DEFAULT_CS               0
  60                                              /* GPIO 3-19 (21248) */
  61   #define CONFIG_SF_DEFAULT_SPEED            30000000
  62   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  63 #endif
  64
  65 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  66 /* Enable NAND support */
  67 #ifdef CONFIG_CMD_NAND
  68   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  69   #define CONFIG_SYS_NAND_BASE          0x40000000
  70   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  71   #define CONFIG_SYS_NAND_ONFI_DETECTION
  72
  73   /* DMA stuff, needed for GPMI/MXS NAND support */
  74 #endif
  75
  76 #endif /* CONFIG_SPI_FLASH */
  77
  78 /* I2C Configs */
  79 #define CONFIG_SYS_I2C
  80 #define CONFIG_SYS_I2C_MXC
  81 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  82 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  83 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  84 #define CONFIG_SYS_I2C_SPEED            100000
  85 #define CONFIG_I2C_GSC                  0
  86 #define CONFIG_I2C_EDID
  87
  88 /* MMC Configs */
  89 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  90
  91 /* eMMC Configs */
  92 #define CONFIG_SUPPORT_EMMC_BOOT
  93 #define CONFIG_SUPPORT_EMMC_RPMB
  94
  95 /*
  96  * SATA Configs
  97  */
  98 #ifdef CONFIG_CMD_SATA
  99   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 100   #define CONFIG_DWC_AHSATA_PORT_ID     0
 101   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 102   #define CONFIG_LBA48
 103 #endif
 104
 105 /*
 106  * PCI express
 107  */
 108 #ifdef CONFIG_CMD_PCI
 109 #define CONFIG_PCI_SCAN_SHOW
 110 #define CONFIG_PCI_FIXUP_DEV
 111 #define CONFIG_PCIE_IMX
 112 #endif
 113
 114 /*
 115  * PMIC
 116  */
 117 #define CONFIG_POWER
 118 #define CONFIG_POWER_I2C
 119 #define CONFIG_POWER_PFUZE100
 120 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 121 #define CONFIG_POWER_LTC3676
 122 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 123
 124 /* Various command support */
 125 #define CONFIG_CMD_UNZIP         /* gzwrite */
 126
 127 /* Ethernet support */
 128 #define CONFIG_FEC_MXC
 129 #define CONFIG_MII
 130 #define IMX_FEC_BASE             ENET_BASE_ADDR
 131 #define CONFIG_FEC_XCV_TYPE      RGMII
 132 #define CONFIG_FEC_MXC_PHYADDR   0
 133 #define CONFIG_ARP_TIMEOUT       200UL
 134
 135 /* USB Configs */
 136 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 137 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 138 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 139 #define CONFIG_MXC_USB_FLAGS      0
 140 #define CONFIG_USBD_HS
 141 #define CONFIG_NETCONSOLE
 142
 143 /* Framebuffer and LCD */
 144 #define CONFIG_VIDEO_IPUV3
 145 #define CONFIG_VIDEO_LOGO
 146 #define CONFIG_IMX_HDMI
 147 #define CONFIG_IMX_VIDEO_SKIP
 148 #define CONFIG_VIDEO_BMP_LOGO
 149 #define CONFIG_SPLASH_SCREEN_ALIGN
 150 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 151
 152 /* Miscellaneous configurable options */
 153 #define CONFIG_HWCONFIG
 154 #define CONFIG_PREBOOT
 155
 156 /* Memory configuration */
 157 #define CONFIG_SYS_MEMTEST_START       0x10000000
 158 #define CONFIG_SYS_MEMTEST_END         0x10010000
 159 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 160
 161 /* Physical Memory Map */
 162 #define CONFIG_NR_DRAM_BANKS           1
 163 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 164 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 165 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 166 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 167
 168 #define CONFIG_SYS_INIT_SP_OFFSET \
 169         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 170 #define CONFIG_SYS_INIT_SP_ADDR \
 171         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 172
 173 /*
 174  * MTD Command for mtdparts
 175  */
 176 #define CONFIG_MTD_DEVICE
 177 #define CONFIG_MTD_PARTITIONS
 178
 179 /* Persistent Environment Config */
 180 #if defined(CONFIG_ENV_IS_IN_MMC)
 181   #define CONFIG_SYS_MMC_ENV_DEV         0
 182   #define CONFIG_SYS_MMC_ENV_PART        1
 183   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 184   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 185   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 186 #elif defined(CONFIG_ENV_IS_IN_NAND)
 187   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 188   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 189   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 190   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 191   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 192 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 193   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 194   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 195   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 196   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 197   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 198   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 199   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 200 #endif
 201
 202 /* Environment */
 203 #define CONFIG_IPADDR             192.168.1.1
 204 #define CONFIG_SERVERIP           192.168.1.146
 205
 206 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 207         "pcidisable=1\0" \
 208         "splashpos=m,m\0" \
 209         "usb_pgood_delay=2000\0" \
 210         "console=ttymxc1\0" \
 211         "bootdevs=usb mmc sata flash\0" \
 212         "hwconfig=_UNKNOWN_\0" \
 213         "video=\0" \
 214         \
 215         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 216         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 217         "disk=0\0" \
 218         "part=1\0" \
 219         \
 220         "fdt_high=0xffffffff\0" \
 221         "fdt_addr=0x18000000\0" \
 222         "initrd_high=0xffffffff\0" \
 223         "fixfdt=" \
 224                 "fdt addr ${fdt_addr}\0" \
 225         "bootdir=boot\0" \
 226         "loadfdt=" \
 227                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 228                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 229                         "run fixfdt; " \
 230                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 231                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 232                         "run fixfdt; " \
 233                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 234                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 235                         "run fixfdt; " \
 236                 "fi\0" \
 237         \
 238         "fs=ext4\0" \
 239         "script=6x_bootscript-ventana\0" \
 240         "loadscript=" \
 241                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 242                         "source ${loadaddr}; " \
 243                 "fi\0" \
 244         \
 245         "uimage=uImage\0" \
 246         "mmc_root=mmcblk0p1\0" \
 247         "mmc_boot=" \
 248                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 249                 "mmc dev ${disk} && mmc rescan && " \
 250                 "setenv dtype mmc; run loadscript; " \
 251                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 252                         "setenv bootargs console=${console},${baudrate} " \
 253                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 254                                 "rootwait rw ${video} ${extra}; " \
 255                         "if run loadfdt; then " \
 256                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 257                         "else " \
 258                                 "bootm; " \
 259                         "fi; " \
 260                 "fi\0" \
 261         \
 262         "sata_boot=" \
 263                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 264                 "sata init && " \
 265                 "setenv dtype sata; run loadscript; " \
 266                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 267                         "setenv bootargs console=${console},${baudrate} " \
 268                                 "root=/dev/sda1 rootfstype=${fs} " \
 269                                 "rootwait rw ${video} ${extra}; " \
 270                         "if run loadfdt; then " \
 271                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 272                         "else " \
 273                                 "bootm; " \
 274                         "fi; " \
 275                 "fi\0" \
 276         "usb_boot=" \
 277                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 278                 "usb start && usb dev ${disk} && " \
 279                 "setenv dtype usb; run loadscript; " \
 280                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 281                         "setenv bootargs console=${console},${baudrate} " \
 282                                 "root=/dev/sda1 rootfstype=${fs} " \
 283                                 "rootwait rw ${video} ${extra}; " \
 284                         "if run loadfdt; then " \
 285                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 286                         "else " \
 287                                 "bootm; " \
 288                         "fi; " \
 289                 "fi\0"
 290
 291 #ifdef CONFIG_SPI_FLASH
 292         #define CONFIG_EXTRA_ENV_SETTINGS \
 293         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 294         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 295         "image_uboot=ventana/u-boot_spi.imx\0" \
 296         \
 297         "spi_koffset=0x90000\0" \
 298         "spi_klen=0x200000\0" \
 299         \
 300         "spi_updateuboot=echo Updating uboot from " \
 301                 "${serverip}:${image_uboot}...; " \
 302                 "tftpboot ${loadaddr} ${image_uboot} && " \
 303                 "sf probe && sf erase 0 80000 && " \
 304                         "sf write ${loadaddr} 400 ${filesize}\0" \
 305         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 306                 "to ${spi_koffset} ...; " \
 307                 "tftp ${loadaddr} ${image_os} && " \
 308                 "sf probe && " \
 309                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 310         \
 311         "flash_boot=" \
 312                 "if sf probe && " \
 313                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 314                         "setenv bootargs console=${console},${baudrate} " \
 315                                 "root=/dev/mtdblock3 " \
 316                                 "rootfstype=squashfs,jffs2 " \
 317                                 "${video} ${extra}; " \
 318                         "bootm; " \
 319                 "fi\0"
 320 #else
 321         #define CONFIG_EXTRA_ENV_SETTINGS \
 322         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 323         \
 324         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 325         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 326                 "tftp ${loadaddr} ${image_rootfs} && " \
 327                 "nand erase.part rootfs && " \
 328                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 329         \
 330         "flash_boot=" \
 331                 "setenv fsload 'ubifsload'; " \
 332                 "ubi part rootfs; " \
 333                 "if ubi check boot; then " \
 334                         "ubifsmount ubi0:boot; " \
 335                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 336                                 "rootfstype=squashfs,ubifs; " \
 337                         "setenv bootdir; " \
 338                 "elif ubi check rootfs; then " \
 339                         "ubifsmount ubi0:rootfs; " \
 340                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 341                                 "rootfstype=ubifs; " \
 342                 "fi; " \
 343                 "setenv dtype nand; run loadscript; " \
 344                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 345                         "setenv bootargs console=${console},${baudrate} " \
 346                                 "root=${root} ${video} ${extra}; " \
 347                         "if run loadfdt; then " \
 348                                 "ubifsumount; " \
 349                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 350                         "else " \
 351                                 "ubifsumount; bootm; " \
 352                         "fi; " \
 353                 "fi\0"
 354 #endif
 355
 356 #define CONFIG_BOOTCOMMAND \
 357         "for btype in ${bootdevs}; do " \
 358                 "echo; echo Attempting ${btype} boot...; " \
 359                 "if run ${btype}_boot; then; fi; " \
 360         "done"
 361
 362 #endif                         /* __CONFIG_H */