include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36
  37 /* Driver Model */
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_DM_GPIO
  40 #define CONFIG_DM_THERMAL
  41 #endif
  42
  43 /* Thermal */
  44 #define CONFIG_IMX_THERMAL
  45
  46 /* Serial */
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE           UART2_BASE
  49
  50 #if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
  51 /* Enable NAND support */
  52 #ifdef CONFIG_CMD_NAND
  53   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  54   #define CONFIG_SYS_NAND_BASE          0x40000000
  55   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  56   #define CONFIG_SYS_NAND_ONFI_DETECTION
  57
  58   /* DMA stuff, needed for GPMI/MXS NAND support */
  59 #endif
  60
  61 #endif /* CONFIG_SPI_FLASH */
  62
  63 /* I2C Configs */
  64 #define CONFIG_SYS_I2C
  65 #define CONFIG_SYS_I2C_MXC
  66 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  67 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  68 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  69 #define CONFIG_SYS_I2C_SPEED            100000
  70 #define CONFIG_I2C_GSC                  0
  71 #define CONFIG_I2C_EDID
  72
  73 /* MMC Configs */
  74 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  75
  76 /*
  77  * SATA Configs
  78  */
  79 #ifdef CONFIG_CMD_SATA
  80   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  81   #define CONFIG_DWC_AHSATA_PORT_ID     0
  82   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  83   #define CONFIG_LBA48
  84 #endif
  85
  86 /*
  87  * PCI express
  88  */
  89 #ifdef CONFIG_CMD_PCI
  90 #define CONFIG_PCI_SCAN_SHOW
  91 #define CONFIG_PCI_FIXUP_DEV
  92 #define CONFIG_PCIE_IMX
  93 #endif
  94
  95 /*
  96  * PMIC
  97  */
  98 #define CONFIG_POWER
  99 #define CONFIG_POWER_I2C
 100 #define CONFIG_POWER_PFUZE100
 101 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 102 #define CONFIG_POWER_LTC3676
 103 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 104
 105 /* Various command support */
 106 #define CONFIG_CMD_UNZIP         /* gzwrite */
 107
 108 /* Ethernet support */
 109 #define CONFIG_FEC_MXC
 110 #define IMX_FEC_BASE             ENET_BASE_ADDR
 111 #define CONFIG_FEC_XCV_TYPE      RGMII
 112 #define CONFIG_FEC_MXC_PHYADDR   0
 113 #define CONFIG_ARP_TIMEOUT       200UL
 114
 115 /* USB Configs */
 116 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 117 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 118 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 119 #define CONFIG_MXC_USB_FLAGS      0
 120 #define CONFIG_USBD_HS
 121 #define CONFIG_NETCONSOLE
 122
 123 /* Framebuffer and LCD */
 124 #define CONFIG_VIDEO_LOGO
 125 #define CONFIG_IMX_HDMI
 126 #define CONFIG_IMX_VIDEO_SKIP
 127 #define CONFIG_VIDEO_BMP_LOGO
 128 #define CONFIG_SPLASH_SCREEN_ALIGN
 129 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 130
 131 /* Miscellaneous configurable options */
 132 #define CONFIG_HWCONFIG
 133
 134 /* Memory configuration */
 135 #define CONFIG_SYS_MEMTEST_START       0x10000000
 136 #define CONFIG_SYS_MEMTEST_END         0x10010000
 137 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 138
 139 /* Physical Memory Map */
 140 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 141 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 142 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 143 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 144
 145 #define CONFIG_SYS_INIT_SP_OFFSET \
 146         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 147 #define CONFIG_SYS_INIT_SP_ADDR \
 148         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 149
 150 /*
 151  * MTD Command for mtdparts
 152  */
 153
 154 /* Persistent Environment Config */
 155 #if defined(CONFIG_ENV_IS_IN_MMC)
 156   #define CONFIG_SYS_MMC_ENV_DEV         0
 157   #define CONFIG_SYS_MMC_ENV_PART        1
 158 #endif
 159
 160 /* Environment */
 161 #define CONFIG_IPADDR             192.168.1.1
 162 #define CONFIG_SERVERIP           192.168.1.146
 163
 164 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 165         "pcidisable=1\0" \
 166         "splashpos=m,m\0" \
 167         "usb_pgood_delay=2000\0" \
 168         "console=ttymxc1\0" \
 169         "bootdevs=usb mmc sata flash\0" \
 170         "hwconfig=_UNKNOWN_\0" \
 171         "video=\0" \
 172         \
 173         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 174         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 175         "disk=0\0" \
 176         "part=1\0" \
 177         \
 178         "fdt_high=0xffffffff\0" \
 179         "fdt_addr=0x18000000\0" \
 180         "initrd_high=0xffffffff\0" \
 181         "fixfdt=" \
 182                 "fdt addr ${fdt_addr}\0" \
 183         "bootdir=boot\0" \
 184         "loadfdt=" \
 185                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 186                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 187                         "run fixfdt; " \
 188                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 189                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 190                         "run fixfdt; " \
 191                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 192                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 193                         "run fixfdt; " \
 194                 "fi\0" \
 195         \
 196         "fs=ext4\0" \
 197         "script=6x_bootscript-ventana\0" \
 198         "loadscript=" \
 199                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 200                         "source ${loadaddr}; " \
 201                 "fi\0" \
 202         \
 203         "uimage=uImage\0" \
 204         "mmc_root=mmcblk0p1\0" \
 205         "mmc_boot=" \
 206                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 207                 "mmc dev ${disk} && mmc rescan && " \
 208                 "setenv dtype mmc; run loadscript; " \
 209                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 210                         "setenv bootargs console=${console},${baudrate} " \
 211                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 212                                 "rootwait rw ${video} ${extra}; " \
 213                         "if run loadfdt; then " \
 214                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 215                         "else " \
 216                                 "bootm; " \
 217                         "fi; " \
 218                 "fi\0" \
 219         \
 220         "sata_boot=" \
 221                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 222                 "sata init && " \
 223                 "setenv dtype sata; run loadscript; " \
 224                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 225                         "setenv bootargs console=${console},${baudrate} " \
 226                                 "root=/dev/sda1 rootfstype=${fs} " \
 227                                 "rootwait rw ${video} ${extra}; " \
 228                         "if run loadfdt; then " \
 229                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 230                         "else " \
 231                                 "bootm; " \
 232                         "fi; " \
 233                 "fi\0" \
 234         "usb_boot=" \
 235                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 236                 "usb start && usb dev ${disk} && " \
 237                 "setenv dtype usb; run loadscript; " \
 238                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 239                         "setenv bootargs console=${console},${baudrate} " \
 240                                 "root=/dev/sda1 rootfstype=${fs} " \
 241                                 "rootwait rw ${video} ${extra}; " \
 242                         "if run loadfdt; then " \
 243                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 244                         "else " \
 245                                 "bootm; " \
 246                         "fi; " \
 247                 "fi\0"
 248
 249 #ifdef CONFIG_SPI_FLASH
 250         #define CONFIG_EXTRA_ENV_SETTINGS \
 251         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 252         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 253         "image_uboot=ventana/u-boot_spi.imx\0" \
 254         \
 255         "spi_koffset=0x90000\0" \
 256         "spi_klen=0x200000\0" \
 257         \
 258         "spi_updateuboot=echo Updating uboot from " \
 259                 "${serverip}:${image_uboot}...; " \
 260                 "tftpboot ${loadaddr} ${image_uboot} && " \
 261                 "sf probe && sf erase 0 80000 && " \
 262                         "sf write ${loadaddr} 400 ${filesize}\0" \
 263         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 264                 "to ${spi_koffset} ...; " \
 265                 "tftp ${loadaddr} ${image_os} && " \
 266                 "sf probe && " \
 267                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 268         \
 269         "flash_boot=" \
 270                 "if sf probe && " \
 271                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 272                         "setenv bootargs console=${console},${baudrate} " \
 273                                 "root=/dev/mtdblock3 " \
 274                                 "rootfstype=squashfs,jffs2 " \
 275                                 "${video} ${extra}; " \
 276                         "bootm; " \
 277                 "fi\0"
 278 #else
 279         #define CONFIG_EXTRA_ENV_SETTINGS \
 280         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 281         \
 282         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 283         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 284                 "tftp ${loadaddr} ${image_rootfs} && " \
 285                 "nand erase.part rootfs && " \
 286                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 287         \
 288         "flash_boot=" \
 289                 "setenv fsload 'ubifsload'; " \
 290                 "ubi part rootfs; " \
 291                 "if ubi check boot; then " \
 292                         "ubifsmount ubi0:boot; " \
 293                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 294                                 "rootfstype=squashfs,ubifs; " \
 295                         "setenv bootdir; " \
 296                 "elif ubi check rootfs; then " \
 297                         "ubifsmount ubi0:rootfs; " \
 298                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 299                                 "rootfstype=ubifs; " \
 300                 "fi; " \
 301                 "setenv dtype nand; run loadscript; " \
 302                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 303                         "setenv bootargs console=${console},${baudrate} " \
 304                                 "root=${root} ${video} ${extra}; " \
 305                         "if run loadfdt; then " \
 306                                 "ubifsumount; " \
 307                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 308                         "else " \
 309                                 "ubifsumount; bootm; " \
 310                         "fi; " \
 311                 "fi\0"
 312 #endif
 313
 314 #define CONFIG_BOOTCOMMAND \
 315         "for btype in ${bootdevs}; do " \
 316                 "echo; echo Attempting ${btype} boot...; " \
 317                 "if run ${btype}_boot; then; fi; " \
 318         "done"
 319
 320 #endif                         /* __CONFIG_H */