include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36 #define CONFIG_MISC_INIT_R
  37
  38 /* Driver Model */
  39 #ifndef CONFIG_SPL_BUILD
  40 #define CONFIG_DM_GPIO
  41 #define CONFIG_DM_THERMAL
  42 #endif
  43
  44 /* Thermal */
  45 #define CONFIG_IMX_THERMAL
  46
  47 /* Serial */
  48 #define CONFIG_MXC_UART
  49 #define CONFIG_MXC_UART_BASE           UART2_BASE
  50
  51 #ifdef CONFIG_SPI_FLASH
  52
  53 /* SPI */
  54 #ifdef CONFIG_CMD_SF
  55   #define CONFIG_SPI_FLASH_MTD
  56   #define CONFIG_SPI_FLASH_BAR
  57   #define CONFIG_SF_DEFAULT_BUS              0
  58   #define CONFIG_SF_DEFAULT_CS               0
  59                                              /* GPIO 3-19 (21248) */
  60   #define CONFIG_SF_DEFAULT_SPEED            30000000
  61   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  62 #endif
  63
  64 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  65 /* Enable NAND support */
  66 #ifdef CONFIG_CMD_NAND
  67   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  68   #define CONFIG_SYS_NAND_BASE          0x40000000
  69   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  70   #define CONFIG_SYS_NAND_ONFI_DETECTION
  71
  72   /* DMA stuff, needed for GPMI/MXS NAND support */
  73 #endif
  74
  75 #endif /* CONFIG_SPI_FLASH */
  76
  77 /* I2C Configs */
  78 #define CONFIG_SYS_I2C
  79 #define CONFIG_SYS_I2C_MXC
  80 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  81 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  82 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  83 #define CONFIG_SYS_I2C_SPEED            100000
  84 #define CONFIG_I2C_GSC                  0
  85 #define CONFIG_I2C_EDID
  86
  87 /* MMC Configs */
  88 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  89
  90 /* eMMC Configs */
  91 #define CONFIG_SUPPORT_EMMC_BOOT
  92
  93 /*
  94  * SATA Configs
  95  */
  96 #ifdef CONFIG_CMD_SATA
  97   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  98   #define CONFIG_DWC_AHSATA_PORT_ID     0
  99   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 100   #define CONFIG_LBA48
 101 #endif
 102
 103 /*
 104  * PCI express
 105  */
 106 #ifdef CONFIG_CMD_PCI
 107 #define CONFIG_PCI_SCAN_SHOW
 108 #define CONFIG_PCI_FIXUP_DEV
 109 #define CONFIG_PCIE_IMX
 110 #endif
 111
 112 /*
 113  * PMIC
 114  */
 115 #define CONFIG_POWER
 116 #define CONFIG_POWER_I2C
 117 #define CONFIG_POWER_PFUZE100
 118 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 119 #define CONFIG_POWER_LTC3676
 120 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 121
 122 /* Various command support */
 123 #define CONFIG_CMD_UNZIP         /* gzwrite */
 124
 125 /* Ethernet support */
 126 #define CONFIG_FEC_MXC
 127 #define CONFIG_MII
 128 #define IMX_FEC_BASE             ENET_BASE_ADDR
 129 #define CONFIG_FEC_XCV_TYPE      RGMII
 130 #define CONFIG_FEC_MXC_PHYADDR   0
 131 #define CONFIG_ARP_TIMEOUT       200UL
 132
 133 /* USB Configs */
 134 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 135 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 136 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 137 #define CONFIG_MXC_USB_FLAGS      0
 138 #define CONFIG_USBD_HS
 139 #define CONFIG_NETCONSOLE
 140
 141 /* Framebuffer and LCD */
 142 #define CONFIG_VIDEO_IPUV3
 143 #define CONFIG_VIDEO_LOGO
 144 #define CONFIG_IMX_HDMI
 145 #define CONFIG_IMX_VIDEO_SKIP
 146 #define CONFIG_VIDEO_BMP_LOGO
 147 #define CONFIG_SPLASH_SCREEN_ALIGN
 148 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 149
 150 /* Miscellaneous configurable options */
 151 #define CONFIG_HWCONFIG
 152 #define CONFIG_PREBOOT
 153
 154 /* Memory configuration */
 155 #define CONFIG_SYS_MEMTEST_START       0x10000000
 156 #define CONFIG_SYS_MEMTEST_END         0x10010000
 157 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 158
 159 /* Physical Memory Map */
 160 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 161 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 162 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 163 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 164
 165 #define CONFIG_SYS_INIT_SP_OFFSET \
 166         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 167 #define CONFIG_SYS_INIT_SP_ADDR \
 168         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 169
 170 /*
 171  * MTD Command for mtdparts
 172  */
 173
 174 /* Persistent Environment Config */
 175 #if defined(CONFIG_ENV_IS_IN_MMC)
 176   #define CONFIG_SYS_MMC_ENV_DEV         0
 177   #define CONFIG_SYS_MMC_ENV_PART        1
 178   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 179   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 180   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 181 #elif defined(CONFIG_ENV_IS_IN_NAND)
 182   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 183   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 184   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 185   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 186   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 187 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 188   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 189   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 190   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 191   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 192   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 193   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 194   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 195 #endif
 196
 197 /* Environment */
 198 #define CONFIG_IPADDR             192.168.1.1
 199 #define CONFIG_SERVERIP           192.168.1.146
 200
 201 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 202         "pcidisable=1\0" \
 203         "splashpos=m,m\0" \
 204         "usb_pgood_delay=2000\0" \
 205         "console=ttymxc1\0" \
 206         "bootdevs=usb mmc sata flash\0" \
 207         "hwconfig=_UNKNOWN_\0" \
 208         "video=\0" \
 209         \
 210         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 211         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 212         "disk=0\0" \
 213         "part=1\0" \
 214         \
 215         "fdt_high=0xffffffff\0" \
 216         "fdt_addr=0x18000000\0" \
 217         "initrd_high=0xffffffff\0" \
 218         "fixfdt=" \
 219                 "fdt addr ${fdt_addr}\0" \
 220         "bootdir=boot\0" \
 221         "loadfdt=" \
 222                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 223                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 224                         "run fixfdt; " \
 225                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 226                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 227                         "run fixfdt; " \
 228                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 229                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 230                         "run fixfdt; " \
 231                 "fi\0" \
 232         \
 233         "fs=ext4\0" \
 234         "script=6x_bootscript-ventana\0" \
 235         "loadscript=" \
 236                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 237                         "source ${loadaddr}; " \
 238                 "fi\0" \
 239         \
 240         "uimage=uImage\0" \
 241         "mmc_root=mmcblk0p1\0" \
 242         "mmc_boot=" \
 243                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 244                 "mmc dev ${disk} && mmc rescan && " \
 245                 "setenv dtype mmc; run loadscript; " \
 246                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 247                         "setenv bootargs console=${console},${baudrate} " \
 248                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 249                                 "rootwait rw ${video} ${extra}; " \
 250                         "if run loadfdt; then " \
 251                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 252                         "else " \
 253                                 "bootm; " \
 254                         "fi; " \
 255                 "fi\0" \
 256         \
 257         "sata_boot=" \
 258                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 259                 "sata init && " \
 260                 "setenv dtype sata; run loadscript; " \
 261                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 262                         "setenv bootargs console=${console},${baudrate} " \
 263                                 "root=/dev/sda1 rootfstype=${fs} " \
 264                                 "rootwait rw ${video} ${extra}; " \
 265                         "if run loadfdt; then " \
 266                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 267                         "else " \
 268                                 "bootm; " \
 269                         "fi; " \
 270                 "fi\0" \
 271         "usb_boot=" \
 272                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 273                 "usb start && usb dev ${disk} && " \
 274                 "setenv dtype usb; run loadscript; " \
 275                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 276                         "setenv bootargs console=${console},${baudrate} " \
 277                                 "root=/dev/sda1 rootfstype=${fs} " \
 278                                 "rootwait rw ${video} ${extra}; " \
 279                         "if run loadfdt; then " \
 280                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 281                         "else " \
 282                                 "bootm; " \
 283                         "fi; " \
 284                 "fi\0"
 285
 286 #ifdef CONFIG_SPI_FLASH
 287         #define CONFIG_EXTRA_ENV_SETTINGS \
 288         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 289         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 290         "image_uboot=ventana/u-boot_spi.imx\0" \
 291         \
 292         "spi_koffset=0x90000\0" \
 293         "spi_klen=0x200000\0" \
 294         \
 295         "spi_updateuboot=echo Updating uboot from " \
 296                 "${serverip}:${image_uboot}...; " \
 297                 "tftpboot ${loadaddr} ${image_uboot} && " \
 298                 "sf probe && sf erase 0 80000 && " \
 299                         "sf write ${loadaddr} 400 ${filesize}\0" \
 300         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 301                 "to ${spi_koffset} ...; " \
 302                 "tftp ${loadaddr} ${image_os} && " \
 303                 "sf probe && " \
 304                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 305         \
 306         "flash_boot=" \
 307                 "if sf probe && " \
 308                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 309                         "setenv bootargs console=${console},${baudrate} " \
 310                                 "root=/dev/mtdblock3 " \
 311                                 "rootfstype=squashfs,jffs2 " \
 312                                 "${video} ${extra}; " \
 313                         "bootm; " \
 314                 "fi\0"
 315 #else
 316         #define CONFIG_EXTRA_ENV_SETTINGS \
 317         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 318         \
 319         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 320         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 321                 "tftp ${loadaddr} ${image_rootfs} && " \
 322                 "nand erase.part rootfs && " \
 323                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 324         \
 325         "flash_boot=" \
 326                 "setenv fsload 'ubifsload'; " \
 327                 "ubi part rootfs; " \
 328                 "if ubi check boot; then " \
 329                         "ubifsmount ubi0:boot; " \
 330                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 331                                 "rootfstype=squashfs,ubifs; " \
 332                         "setenv bootdir; " \
 333                 "elif ubi check rootfs; then " \
 334                         "ubifsmount ubi0:rootfs; " \
 335                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 336                                 "rootfstype=ubifs; " \
 337                 "fi; " \
 338                 "setenv dtype nand; run loadscript; " \
 339                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 340                         "setenv bootargs console=${console},${baudrate} " \
 341                                 "root=${root} ${video} ${extra}; " \
 342                         "if run loadfdt; then " \
 343                                 "ubifsumount; " \
 344                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 345                         "else " \
 346                                 "ubifsumount; bootm; " \
 347                         "fi; " \
 348                 "fi\0"
 349 #endif
 350
 351 #define CONFIG_BOOTCOMMAND \
 352         "for btype in ${bootdevs}; do " \
 353                 "echo; echo Attempting ${btype} boot...; " \
 354                 "if run ${btype}_boot; then; fi; " \
 355         "done"
 356
 357 #endif                         /* __CONFIG_H */