include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11
  12 /* Falcon Mode */
  13 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  14
  15 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  16 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  17
  18 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  22
  23 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  24 #include "mx6_common.h"
  25
  26 /* Serial */
  27 #define CONFIG_MXC_UART_BASE           UART2_BASE
  28
  29 /* NAND */
  30 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  31
  32 #undef CONFIG_SYS_BOOTM_LEN
  33 #define CONFIG_SYS_BOOTM_LEN            (64 << 20)
  34
  35 /* I2C Configs */
  36 #define CONFIG_I2C_GSC                  0
  37
  38 /* MMC Configs */
  39 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  40
  41 /*
  42  * SATA Configs
  43  */
  44 #ifdef CONFIG_CMD_SATA
  45   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  46   #define CONFIG_DWC_AHSATA_PORT_ID     0
  47   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  48   #define CONFIG_LBA48
  49 #endif
  50
  51 /*
  52  * PCI express
  53  */
  54 #ifdef CONFIG_CMD_PCI
  55 #define CONFIG_PCIE_IMX
  56 #endif
  57
  58 /*
  59  * PMIC
  60  */
  61 #define CONFIG_POWER_PFUZE100
  62 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  63 #define CONFIG_POWER_LTC3676
  64 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
  65
  66 /* Various command support */
  67
  68 /* USB Configs */
  69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
  70 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
  71 #define CONFIG_MXC_USB_FLAGS      0
  72 #define CONFIG_USBD_HS
  73
  74 /* Framebuffer and LCD */
  75 #define CONFIG_VIDEO_LOGO
  76 #define CONFIG_IMX_HDMI
  77 #define CONFIG_IMX_VIDEO_SKIP
  78 #define CONFIG_VIDEO_BMP_LOGO
  79 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
  80
  81 /* Miscellaneous configurable options */
  82 #define CONFIG_HWCONFIG
  83
  84 /* Memory configuration */
  85
  86 /* Physical Memory Map */
  87 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  88 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  89 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  90 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  91
  92 #define CONFIG_SYS_INIT_SP_OFFSET \
  93         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  94 #define CONFIG_SYS_INIT_SP_ADDR \
  95         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  96
  97 /*
  98  * MTD Command for mtdparts
  99  */
 100
 101 /* Persistent Environment Config */
 102
 103 /* Environment */
 104 #define CONFIG_IPADDR             192.168.1.1
 105 #define CONFIG_SERVERIP           192.168.1.146
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 108         "splashpos=m,m\0" \
 109         "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
 110         "usb_pgood_delay=2000\0" \
 111         "console=ttymxc1\0" \
 112         "bootdevs=usb mmc sata flash\0" \
 113         "hwconfig=_UNKNOWN_\0" \
 114         "video=\0" \
 115         \
 116         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 117         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 118         "disk=0\0" \
 119         "part=1\0" \
 120         \
 121         "fdt_high=0xffffffff\0" \
 122         "fdt_addr=0x18000000\0" \
 123         "initrd_high=0xffffffff\0" \
 124         "fixfdt=" \
 125                 "fdt addr ${fdt_addr}\0" \
 126         "bootdir=boot\0" \
 127         "loadfdt=" \
 128                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 129                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 130                         "run fixfdt; " \
 131                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 132                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 133                         "run fixfdt; " \
 134                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 135                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 136                         "run fixfdt; " \
 137                 "fi\0" \
 138         \
 139         "fs=ext4\0" \
 140         "script=6x_bootscript-ventana\0" \
 141         "loadscript=" \
 142                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 143                         "source ${loadaddr}; " \
 144                 "fi\0" \
 145         \
 146         "uimage=uImage\0" \
 147         "mmc_root=mmcblk0p1\0" \
 148         "mmc_boot=" \
 149                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 150                 "mmc dev ${disk} && mmc rescan && " \
 151                 "setenv dtype mmc; run loadscript; " \
 152                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 153                         "setenv bootargs console=${console},${baudrate} " \
 154                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 155                                 "rootwait rw ${video} ${extra}; " \
 156                         "if run loadfdt; then " \
 157                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 158                         "else " \
 159                                 "bootm; " \
 160                         "fi; " \
 161                 "fi\0" \
 162         \
 163         "sata_boot=" \
 164                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 165                 "sata init && " \
 166                 "setenv dtype sata; run loadscript; " \
 167                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 168                         "setenv bootargs console=${console},${baudrate} " \
 169                                 "root=/dev/sda1 rootfstype=${fs} " \
 170                                 "rootwait rw ${video} ${extra}; " \
 171                         "if run loadfdt; then " \
 172                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 173                         "else " \
 174                                 "bootm; " \
 175                         "fi; " \
 176                 "fi\0" \
 177         "usb_boot=" \
 178                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 179                 "usb start && usb dev ${disk} && " \
 180                 "setenv dtype usb; run loadscript; " \
 181                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 182                         "setenv bootargs console=${console},${baudrate} " \
 183                                 "root=/dev/sda1 rootfstype=${fs} " \
 184                                 "rootwait rw ${video} ${extra}; " \
 185                         "if run loadfdt; then " \
 186                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 187                         "else " \
 188                                 "bootm; " \
 189                         "fi; " \
 190                 "fi\0"
 191
 192 #ifdef CONFIG_SPI_FLASH
 193         #define CONFIG_EXTRA_ENV_SETTINGS \
 194         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 195         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 196         "image_uboot=ventana/u-boot_spi.imx\0" \
 197         \
 198         "spi_koffset=0x90000\0" \
 199         "spi_klen=0x200000\0" \
 200         \
 201         "spi_updateuboot=echo Updating uboot from " \
 202                 "${serverip}:${image_uboot}...; " \
 203                 "tftpboot ${loadaddr} ${image_uboot} && " \
 204                 "sf probe && sf erase 0 80000 && " \
 205                         "sf write ${loadaddr} 400 ${filesize}\0" \
 206         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 207                 "to ${spi_koffset} ...; " \
 208                 "tftp ${loadaddr} ${image_os} && " \
 209                 "sf probe && " \
 210                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 211         \
 212         "flash_boot=" \
 213                 "if sf probe && " \
 214                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 215                         "setenv bootargs console=${console},${baudrate} " \
 216                                 "root=/dev/mtdblock3 " \
 217                                 "rootfstype=squashfs,jffs2 " \
 218                                 "${video} ${extra}; " \
 219                         "bootm; " \
 220                 "fi\0"
 221 #else
 222         #define CONFIG_EXTRA_ENV_SETTINGS \
 223         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 224         \
 225         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 226         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 227                 "tftp ${loadaddr} ${image_rootfs} && " \
 228                 "nand erase.part rootfs && " \
 229                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 230         \
 231         "flash_boot=" \
 232                 "setenv fsload 'ubifsload'; " \
 233                 "ubi part rootfs; " \
 234                 "if ubi check boot; then " \
 235                         "ubifsmount ubi0:boot; " \
 236                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 237                                 "rootfstype=squashfs,ubifs; " \
 238                         "setenv bootdir; " \
 239                 "elif ubi check rootfs; then " \
 240                         "ubifsmount ubi0:rootfs; " \
 241                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 242                                 "rootfstype=ubifs; " \
 243                 "fi; " \
 244                 "setenv dtype nand; run loadscript; " \
 245                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 246                         "setenv bootargs console=${console},${baudrate} " \
 247                                 "root=${root} ${video} ${extra}; " \
 248                         "if run loadfdt; then " \
 249                                 "ubifsumount; " \
 250                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 251                         "else " \
 252                                 "ubifsumount; bootm; " \
 253                         "fi; " \
 254                 "fi\0"
 255 #endif
 256
 257 #endif                         /* __CONFIG_H */