1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013 Gateworks Corporation
10 /* Location in NAND to read U-Boot from */
11 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
14 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
24 #include "imx6_spl.h" /* common IMX6 SPL configuration */
25 #include "mx6_common.h"
27 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
30 #define CONFIG_SERIAL_TAG
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
38 #ifndef CONFIG_SPL_BUILD
39 #define CONFIG_DM_GPIO
40 #define CONFIG_DM_THERMAL
44 #define CONFIG_IMX_THERMAL
47 #define CONFIG_MXC_UART
48 #define CONFIG_MXC_UART_BASE UART2_BASE
50 #ifdef CONFIG_SPI_FLASH
54 #define CONFIG_SPI_FLASH_MTD
55 /* GPIO 3-19 (21248) */
58 #elif defined(CONFIG_SPL_NAND_SUPPORT)
59 /* Enable NAND support */
60 #ifdef CONFIG_CMD_NAND
61 #define CONFIG_SYS_MAX_NAND_DEVICE 1
62 #define CONFIG_SYS_NAND_BASE 0x40000000
63 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
64 #define CONFIG_SYS_NAND_ONFI_DETECTION
66 /* DMA stuff, needed for GPMI/MXS NAND support */
69 #endif /* CONFIG_SPI_FLASH */
72 #define CONFIG_SYS_I2C
73 #define CONFIG_SYS_I2C_MXC
74 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
75 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
76 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
77 #define CONFIG_SYS_I2C_SPEED 100000
78 #define CONFIG_I2C_GSC 0
79 #define CONFIG_I2C_EDID
82 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
87 #ifdef CONFIG_CMD_SATA
88 #define CONFIG_SYS_SATA_MAX_DEVICE 1
89 #define CONFIG_DWC_AHSATA_PORT_ID 0
90 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
98 #define CONFIG_PCI_SCAN_SHOW
99 #define CONFIG_PCI_FIXUP_DEV
100 #define CONFIG_PCIE_IMX
107 #define CONFIG_POWER_I2C
108 #define CONFIG_POWER_PFUZE100
109 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
110 #define CONFIG_POWER_LTC3676
111 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
113 /* Various command support */
114 #define CONFIG_CMD_UNZIP /* gzwrite */
116 /* Ethernet support */
117 #define CONFIG_FEC_MXC
118 #define IMX_FEC_BASE ENET_BASE_ADDR
119 #define CONFIG_FEC_XCV_TYPE RGMII
120 #define CONFIG_FEC_MXC_PHYADDR 0
121 #define CONFIG_ARP_TIMEOUT 200UL
124 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
125 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
126 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
127 #define CONFIG_MXC_USB_FLAGS 0
128 #define CONFIG_USBD_HS
129 #define CONFIG_NETCONSOLE
131 /* Framebuffer and LCD */
132 #define CONFIG_VIDEO_LOGO
133 #define CONFIG_IMX_HDMI
134 #define CONFIG_IMX_VIDEO_SKIP
135 #define CONFIG_VIDEO_BMP_LOGO
136 #define CONFIG_SPLASH_SCREEN_ALIGN
137 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
139 /* Miscellaneous configurable options */
140 #define CONFIG_HWCONFIG
141 #define CONFIG_USE_PREBOOT
142 #define CONFIG_PREBOOT
144 /* Memory configuration */
145 #define CONFIG_SYS_MEMTEST_START 0x10000000
146 #define CONFIG_SYS_MEMTEST_END 0x10010000
147 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
149 /* Physical Memory Map */
150 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
151 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
152 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
153 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
155 #define CONFIG_SYS_INIT_SP_OFFSET \
156 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
157 #define CONFIG_SYS_INIT_SP_ADDR \
158 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
161 * MTD Command for mtdparts
164 /* Persistent Environment Config */
165 #if defined(CONFIG_ENV_IS_IN_MMC)
166 #define CONFIG_SYS_MMC_ENV_DEV 0
167 #define CONFIG_SYS_MMC_ENV_PART 1
168 #define CONFIG_ENV_OFFSET (709 * SZ_1K)
169 #define CONFIG_ENV_SIZE (128 * SZ_1K)
170 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
171 #elif defined(CONFIG_ENV_IS_IN_NAND)
172 #define CONFIG_ENV_OFFSET (16 * SZ_1M)
173 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
174 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
175 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
176 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
177 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
178 #define CONFIG_ENV_OFFSET (512 * SZ_1K)
179 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
180 #define CONFIG_ENV_SIZE (8 * SZ_1K)
184 #define CONFIG_IPADDR 192.168.1.1
185 #define CONFIG_SERVERIP 192.168.1.146
187 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
190 "usb_pgood_delay=2000\0" \
191 "console=ttymxc1\0" \
192 "bootdevs=usb mmc sata flash\0" \
193 "hwconfig=_UNKNOWN_\0" \
196 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
197 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
201 "fdt_high=0xffffffff\0" \
202 "fdt_addr=0x18000000\0" \
203 "initrd_high=0xffffffff\0" \
205 "fdt addr ${fdt_addr}\0" \
208 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
209 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
211 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
212 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
214 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
215 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
220 "script=6x_bootscript-ventana\0" \
222 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
223 "source ${loadaddr}; " \
227 "mmc_root=mmcblk0p1\0" \
229 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
230 "mmc dev ${disk} && mmc rescan && " \
231 "setenv dtype mmc; run loadscript; " \
232 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
233 "setenv bootargs console=${console},${baudrate} " \
234 "root=/dev/${mmc_root} rootfstype=${fs} " \
235 "rootwait rw ${video} ${extra}; " \
236 "if run loadfdt; then " \
237 "bootm ${loadaddr} - ${fdt_addr}; " \
244 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
246 "setenv dtype sata; run loadscript; " \
247 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
248 "setenv bootargs console=${console},${baudrate} " \
249 "root=/dev/sda1 rootfstype=${fs} " \
250 "rootwait rw ${video} ${extra}; " \
251 "if run loadfdt; then " \
252 "bootm ${loadaddr} - ${fdt_addr}; " \
258 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
259 "usb start && usb dev ${disk} && " \
260 "setenv dtype usb; run loadscript; " \
261 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
262 "setenv bootargs console=${console},${baudrate} " \
263 "root=/dev/sda1 rootfstype=${fs} " \
264 "rootwait rw ${video} ${extra}; " \
265 "if run loadfdt; then " \
266 "bootm ${loadaddr} - ${fdt_addr}; " \
272 #ifdef CONFIG_SPI_FLASH
273 #define CONFIG_EXTRA_ENV_SETTINGS \
274 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
275 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
276 "image_uboot=ventana/u-boot_spi.imx\0" \
278 "spi_koffset=0x90000\0" \
279 "spi_klen=0x200000\0" \
281 "spi_updateuboot=echo Updating uboot from " \
282 "${serverip}:${image_uboot}...; " \
283 "tftpboot ${loadaddr} ${image_uboot} && " \
284 "sf probe && sf erase 0 80000 && " \
285 "sf write ${loadaddr} 400 ${filesize}\0" \
286 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
287 "to ${spi_koffset} ...; " \
288 "tftp ${loadaddr} ${image_os} && " \
290 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
294 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
295 "setenv bootargs console=${console},${baudrate} " \
296 "root=/dev/mtdblock3 " \
297 "rootfstype=squashfs,jffs2 " \
298 "${video} ${extra}; " \
302 #define CONFIG_EXTRA_ENV_SETTINGS \
303 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
305 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
306 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
307 "tftp ${loadaddr} ${image_rootfs} && " \
308 "nand erase.part rootfs && " \
309 "nand write ${loadaddr} rootfs ${filesize}\0" \
312 "setenv fsload 'ubifsload'; " \
313 "ubi part rootfs; " \
314 "if ubi check boot; then " \
315 "ubifsmount ubi0:boot; " \
316 "setenv root ubi0:rootfs ubi.mtd=2 " \
317 "rootfstype=squashfs,ubifs; " \
319 "elif ubi check rootfs; then " \
320 "ubifsmount ubi0:rootfs; " \
321 "setenv root ubi0:rootfs ubi.mtd=2 " \
322 "rootfstype=ubifs; " \
324 "setenv dtype nand; run loadscript; " \
325 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
326 "setenv bootargs console=${console},${baudrate} " \
327 "root=${root} ${video} ${extra}; " \
328 "if run loadfdt; then " \
330 "bootm ${loadaddr} - ${fdt_addr}; " \
332 "ubifsumount; bootm; " \
337 #define CONFIG_BOOTCOMMAND \
338 "for btype in ${bootdevs}; do " \
339 "echo; echo Attempting ${btype} boot...; " \
340 "if run ${btype}_boot; then; fi; " \
343 #endif /* __CONFIG_H */