include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36
  37 /* Driver Model */
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_DM_GPIO
  40 #define CONFIG_DM_THERMAL
  41 #endif
  42
  43 /* Thermal */
  44 #define CONFIG_IMX_THERMAL
  45
  46 /* Serial */
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE           UART2_BASE
  49
  50 #ifdef CONFIG_SPI_FLASH
  51
  52 /* SPI */
  53 #ifdef CONFIG_CMD_SF
  54   #define CONFIG_SPI_FLASH_MTD
  55                                              /* GPIO 3-19 (21248) */
  56 #endif
  57
  58 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  59 /* Enable NAND support */
  60 #ifdef CONFIG_CMD_NAND
  61   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  62   #define CONFIG_SYS_NAND_BASE          0x40000000
  63   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  64   #define CONFIG_SYS_NAND_ONFI_DETECTION
  65
  66   /* DMA stuff, needed for GPMI/MXS NAND support */
  67 #endif
  68
  69 #endif /* CONFIG_SPI_FLASH */
  70
  71 /* I2C Configs */
  72 #define CONFIG_SYS_I2C
  73 #define CONFIG_SYS_I2C_MXC
  74 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  75 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  76 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  77 #define CONFIG_SYS_I2C_SPEED            100000
  78 #define CONFIG_I2C_GSC                  0
  79 #define CONFIG_I2C_EDID
  80
  81 /* MMC Configs */
  82 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  83
  84 /* eMMC Configs */
  85 #define CONFIG_SUPPORT_EMMC_BOOT
  86
  87 /*
  88  * SATA Configs
  89  */
  90 #ifdef CONFIG_CMD_SATA
  91   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  92   #define CONFIG_DWC_AHSATA_PORT_ID     0
  93   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  94   #define CONFIG_LBA48
  95 #endif
  96
  97 /*
  98  * PCI express
  99  */
 100 #ifdef CONFIG_CMD_PCI
 101 #define CONFIG_PCI_SCAN_SHOW
 102 #define CONFIG_PCI_FIXUP_DEV
 103 #define CONFIG_PCIE_IMX
 104 #endif
 105
 106 /*
 107  * PMIC
 108  */
 109 #define CONFIG_POWER
 110 #define CONFIG_POWER_I2C
 111 #define CONFIG_POWER_PFUZE100
 112 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 113 #define CONFIG_POWER_LTC3676
 114 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 115
 116 /* Various command support */
 117 #define CONFIG_CMD_UNZIP         /* gzwrite */
 118
 119 /* Ethernet support */
 120 #define CONFIG_FEC_MXC
 121 #define IMX_FEC_BASE             ENET_BASE_ADDR
 122 #define CONFIG_FEC_XCV_TYPE      RGMII
 123 #define CONFIG_FEC_MXC_PHYADDR   0
 124 #define CONFIG_ARP_TIMEOUT       200UL
 125
 126 /* USB Configs */
 127 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 128 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 129 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 130 #define CONFIG_MXC_USB_FLAGS      0
 131 #define CONFIG_USBD_HS
 132 #define CONFIG_NETCONSOLE
 133
 134 /* Framebuffer and LCD */
 135 #define CONFIG_VIDEO_IPUV3
 136 #define CONFIG_VIDEO_LOGO
 137 #define CONFIG_IMX_HDMI
 138 #define CONFIG_IMX_VIDEO_SKIP
 139 #define CONFIG_VIDEO_BMP_LOGO
 140 #define CONFIG_SPLASH_SCREEN_ALIGN
 141 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 142
 143 /* Miscellaneous configurable options */
 144 #define CONFIG_HWCONFIG
 145 #define CONFIG_PREBOOT
 146
 147 /* Memory configuration */
 148 #define CONFIG_SYS_MEMTEST_START       0x10000000
 149 #define CONFIG_SYS_MEMTEST_END         0x10010000
 150 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 151
 152 /* Physical Memory Map */
 153 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 154 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 155 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 156 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 157
 158 #define CONFIG_SYS_INIT_SP_OFFSET \
 159         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 160 #define CONFIG_SYS_INIT_SP_ADDR \
 161         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 162
 163 /*
 164  * MTD Command for mtdparts
 165  */
 166
 167 /* Persistent Environment Config */
 168 #if defined(CONFIG_ENV_IS_IN_MMC)
 169   #define CONFIG_SYS_MMC_ENV_DEV         0
 170   #define CONFIG_SYS_MMC_ENV_PART        1
 171   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 172   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 173   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 174 #elif defined(CONFIG_ENV_IS_IN_NAND)
 175   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 176   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 177   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 178   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 179   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 180 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 181   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 182   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 183   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 184 #endif
 185
 186 /* Environment */
 187 #define CONFIG_IPADDR             192.168.1.1
 188 #define CONFIG_SERVERIP           192.168.1.146
 189
 190 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 191         "pcidisable=1\0" \
 192         "splashpos=m,m\0" \
 193         "usb_pgood_delay=2000\0" \
 194         "console=ttymxc1\0" \
 195         "bootdevs=usb mmc sata flash\0" \
 196         "hwconfig=_UNKNOWN_\0" \
 197         "video=\0" \
 198         \
 199         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 200         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 201         "disk=0\0" \
 202         "part=1\0" \
 203         \
 204         "fdt_high=0xffffffff\0" \
 205         "fdt_addr=0x18000000\0" \
 206         "initrd_high=0xffffffff\0" \
 207         "fixfdt=" \
 208                 "fdt addr ${fdt_addr}\0" \
 209         "bootdir=boot\0" \
 210         "loadfdt=" \
 211                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 212                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 213                         "run fixfdt; " \
 214                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 215                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 216                         "run fixfdt; " \
 217                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 218                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 219                         "run fixfdt; " \
 220                 "fi\0" \
 221         \
 222         "fs=ext4\0" \
 223         "script=6x_bootscript-ventana\0" \
 224         "loadscript=" \
 225                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 226                         "source ${loadaddr}; " \
 227                 "fi\0" \
 228         \
 229         "uimage=uImage\0" \
 230         "mmc_root=mmcblk0p1\0" \
 231         "mmc_boot=" \
 232                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 233                 "mmc dev ${disk} && mmc rescan && " \
 234                 "setenv dtype mmc; run loadscript; " \
 235                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 236                         "setenv bootargs console=${console},${baudrate} " \
 237                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 238                                 "rootwait rw ${video} ${extra}; " \
 239                         "if run loadfdt; then " \
 240                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 241                         "else " \
 242                                 "bootm; " \
 243                         "fi; " \
 244                 "fi\0" \
 245         \
 246         "sata_boot=" \
 247                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 248                 "sata init && " \
 249                 "setenv dtype sata; run loadscript; " \
 250                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 251                         "setenv bootargs console=${console},${baudrate} " \
 252                                 "root=/dev/sda1 rootfstype=${fs} " \
 253                                 "rootwait rw ${video} ${extra}; " \
 254                         "if run loadfdt; then " \
 255                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 256                         "else " \
 257                                 "bootm; " \
 258                         "fi; " \
 259                 "fi\0" \
 260         "usb_boot=" \
 261                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 262                 "usb start && usb dev ${disk} && " \
 263                 "setenv dtype usb; run loadscript; " \
 264                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 265                         "setenv bootargs console=${console},${baudrate} " \
 266                                 "root=/dev/sda1 rootfstype=${fs} " \
 267                                 "rootwait rw ${video} ${extra}; " \
 268                         "if run loadfdt; then " \
 269                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 270                         "else " \
 271                                 "bootm; " \
 272                         "fi; " \
 273                 "fi\0"
 274
 275 #ifdef CONFIG_SPI_FLASH
 276         #define CONFIG_EXTRA_ENV_SETTINGS \
 277         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 278         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 279         "image_uboot=ventana/u-boot_spi.imx\0" \
 280         \
 281         "spi_koffset=0x90000\0" \
 282         "spi_klen=0x200000\0" \
 283         \
 284         "spi_updateuboot=echo Updating uboot from " \
 285                 "${serverip}:${image_uboot}...; " \
 286                 "tftpboot ${loadaddr} ${image_uboot} && " \
 287                 "sf probe && sf erase 0 80000 && " \
 288                         "sf write ${loadaddr} 400 ${filesize}\0" \
 289         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 290                 "to ${spi_koffset} ...; " \
 291                 "tftp ${loadaddr} ${image_os} && " \
 292                 "sf probe && " \
 293                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 294         \
 295         "flash_boot=" \
 296                 "if sf probe && " \
 297                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 298                         "setenv bootargs console=${console},${baudrate} " \
 299                                 "root=/dev/mtdblock3 " \
 300                                 "rootfstype=squashfs,jffs2 " \
 301                                 "${video} ${extra}; " \
 302                         "bootm; " \
 303                 "fi\0"
 304 #else
 305         #define CONFIG_EXTRA_ENV_SETTINGS \
 306         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 307         \
 308         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 309         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 310                 "tftp ${loadaddr} ${image_rootfs} && " \
 311                 "nand erase.part rootfs && " \
 312                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 313         \
 314         "flash_boot=" \
 315                 "setenv fsload 'ubifsload'; " \
 316                 "ubi part rootfs; " \
 317                 "if ubi check boot; then " \
 318                         "ubifsmount ubi0:boot; " \
 319                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 320                                 "rootfstype=squashfs,ubifs; " \
 321                         "setenv bootdir; " \
 322                 "elif ubi check rootfs; then " \
 323                         "ubifsmount ubi0:rootfs; " \
 324                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 325                                 "rootfstype=ubifs; " \
 326                 "fi; " \
 327                 "setenv dtype nand; run loadscript; " \
 328                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 329                         "setenv bootargs console=${console},${baudrate} " \
 330                                 "root=${root} ${video} ${extra}; " \
 331                         "if run loadfdt; then " \
 332                                 "ubifsumount; " \
 333                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 334                         "else " \
 335                                 "ubifsumount; bootm; " \
 336                         "fi; " \
 337                 "fi\0"
 338 #endif
 339
 340 #define CONFIG_BOOTCOMMAND \
 341         "for btype in ${bootdevs}; do " \
 342                 "echo; echo Attempting ${btype} boot...; " \
 343                 "if run ${btype}_boot; then; fi; " \
 344         "done"
 345
 346 #endif                         /* __CONFIG_H */