include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36
  37 /* Driver Model */
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_DM_GPIO
  40 #define CONFIG_DM_THERMAL
  41 #endif
  42
  43 /* Thermal */
  44 #define CONFIG_IMX_THERMAL
  45
  46 /* Serial */
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE           UART2_BASE
  49
  50 #ifdef CONFIG_SPI_FLASH
  51
  52 /* SPI */
  53 #ifdef CONFIG_CMD_SF
  54   #define CONFIG_SPI_FLASH_MTD
  55   #define CONFIG_SF_DEFAULT_BUS              0
  56   #define CONFIG_SF_DEFAULT_CS               0
  57                                              /* GPIO 3-19 (21248) */
  58   #define CONFIG_SF_DEFAULT_SPEED            30000000
  59   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  60 #endif
  61
  62 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  63 /* Enable NAND support */
  64 #ifdef CONFIG_CMD_NAND
  65   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  66   #define CONFIG_SYS_NAND_BASE          0x40000000
  67   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  68   #define CONFIG_SYS_NAND_ONFI_DETECTION
  69
  70   /* DMA stuff, needed for GPMI/MXS NAND support */
  71 #endif
  72
  73 #endif /* CONFIG_SPI_FLASH */
  74
  75 /* I2C Configs */
  76 #define CONFIG_SYS_I2C
  77 #define CONFIG_SYS_I2C_MXC
  78 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  79 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  80 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  81 #define CONFIG_SYS_I2C_SPEED            100000
  82 #define CONFIG_I2C_GSC                  0
  83 #define CONFIG_I2C_EDID
  84
  85 /* MMC Configs */
  86 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  87
  88 /* eMMC Configs */
  89 #define CONFIG_SUPPORT_EMMC_BOOT
  90
  91 /*
  92  * SATA Configs
  93  */
  94 #ifdef CONFIG_CMD_SATA
  95   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  96   #define CONFIG_DWC_AHSATA_PORT_ID     0
  97   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  98   #define CONFIG_LBA48
  99 #endif
 100
 101 /*
 102  * PCI express
 103  */
 104 #ifdef CONFIG_CMD_PCI
 105 #define CONFIG_PCI_SCAN_SHOW
 106 #define CONFIG_PCI_FIXUP_DEV
 107 #define CONFIG_PCIE_IMX
 108 #endif
 109
 110 /*
 111  * PMIC
 112  */
 113 #define CONFIG_POWER
 114 #define CONFIG_POWER_I2C
 115 #define CONFIG_POWER_PFUZE100
 116 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 117 #define CONFIG_POWER_LTC3676
 118 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 119
 120 /* Various command support */
 121 #define CONFIG_CMD_UNZIP         /* gzwrite */
 122
 123 /* Ethernet support */
 124 #define CONFIG_FEC_MXC
 125 #define IMX_FEC_BASE             ENET_BASE_ADDR
 126 #define CONFIG_FEC_XCV_TYPE      RGMII
 127 #define CONFIG_FEC_MXC_PHYADDR   0
 128 #define CONFIG_ARP_TIMEOUT       200UL
 129
 130 /* USB Configs */
 131 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 132 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 133 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 134 #define CONFIG_MXC_USB_FLAGS      0
 135 #define CONFIG_USBD_HS
 136 #define CONFIG_NETCONSOLE
 137
 138 /* Framebuffer and LCD */
 139 #define CONFIG_VIDEO_IPUV3
 140 #define CONFIG_VIDEO_LOGO
 141 #define CONFIG_IMX_HDMI
 142 #define CONFIG_IMX_VIDEO_SKIP
 143 #define CONFIG_VIDEO_BMP_LOGO
 144 #define CONFIG_SPLASH_SCREEN_ALIGN
 145 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 146
 147 /* Miscellaneous configurable options */
 148 #define CONFIG_HWCONFIG
 149 #define CONFIG_PREBOOT
 150
 151 /* Memory configuration */
 152 #define CONFIG_SYS_MEMTEST_START       0x10000000
 153 #define CONFIG_SYS_MEMTEST_END         0x10010000
 154 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 155
 156 /* Physical Memory Map */
 157 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 158 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 159 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 160 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 161
 162 #define CONFIG_SYS_INIT_SP_OFFSET \
 163         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 164 #define CONFIG_SYS_INIT_SP_ADDR \
 165         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 166
 167 /*
 168  * MTD Command for mtdparts
 169  */
 170
 171 /* Persistent Environment Config */
 172 #if defined(CONFIG_ENV_IS_IN_MMC)
 173   #define CONFIG_SYS_MMC_ENV_DEV         0
 174   #define CONFIG_SYS_MMC_ENV_PART        1
 175   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 176   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 177   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 178 #elif defined(CONFIG_ENV_IS_IN_NAND)
 179   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 180   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 181   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 182   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 183   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 184 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 185   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 186   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 187   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 188   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 189   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 190   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 191   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 192 #endif
 193
 194 /* Environment */
 195 #define CONFIG_IPADDR             192.168.1.1
 196 #define CONFIG_SERVERIP           192.168.1.146
 197
 198 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 199         "pcidisable=1\0" \
 200         "splashpos=m,m\0" \
 201         "usb_pgood_delay=2000\0" \
 202         "console=ttymxc1\0" \
 203         "bootdevs=usb mmc sata flash\0" \
 204         "hwconfig=_UNKNOWN_\0" \
 205         "video=\0" \
 206         \
 207         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 208         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 209         "disk=0\0" \
 210         "part=1\0" \
 211         \
 212         "fdt_high=0xffffffff\0" \
 213         "fdt_addr=0x18000000\0" \
 214         "initrd_high=0xffffffff\0" \
 215         "fixfdt=" \
 216                 "fdt addr ${fdt_addr}\0" \
 217         "bootdir=boot\0" \
 218         "loadfdt=" \
 219                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 220                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 221                         "run fixfdt; " \
 222                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 223                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 224                         "run fixfdt; " \
 225                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 226                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 227                         "run fixfdt; " \
 228                 "fi\0" \
 229         \
 230         "fs=ext4\0" \
 231         "script=6x_bootscript-ventana\0" \
 232         "loadscript=" \
 233                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 234                         "source ${loadaddr}; " \
 235                 "fi\0" \
 236         \
 237         "uimage=uImage\0" \
 238         "mmc_root=mmcblk0p1\0" \
 239         "mmc_boot=" \
 240                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 241                 "mmc dev ${disk} && mmc rescan && " \
 242                 "setenv dtype mmc; run loadscript; " \
 243                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 244                         "setenv bootargs console=${console},${baudrate} " \
 245                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 246                                 "rootwait rw ${video} ${extra}; " \
 247                         "if run loadfdt; then " \
 248                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 249                         "else " \
 250                                 "bootm; " \
 251                         "fi; " \
 252                 "fi\0" \
 253         \
 254         "sata_boot=" \
 255                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 256                 "sata init && " \
 257                 "setenv dtype sata; run loadscript; " \
 258                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 259                         "setenv bootargs console=${console},${baudrate} " \
 260                                 "root=/dev/sda1 rootfstype=${fs} " \
 261                                 "rootwait rw ${video} ${extra}; " \
 262                         "if run loadfdt; then " \
 263                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 264                         "else " \
 265                                 "bootm; " \
 266                         "fi; " \
 267                 "fi\0" \
 268         "usb_boot=" \
 269                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 270                 "usb start && usb dev ${disk} && " \
 271                 "setenv dtype usb; run loadscript; " \
 272                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 273                         "setenv bootargs console=${console},${baudrate} " \
 274                                 "root=/dev/sda1 rootfstype=${fs} " \
 275                                 "rootwait rw ${video} ${extra}; " \
 276                         "if run loadfdt; then " \
 277                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 278                         "else " \
 279                                 "bootm; " \
 280                         "fi; " \
 281                 "fi\0"
 282
 283 #ifdef CONFIG_SPI_FLASH
 284         #define CONFIG_EXTRA_ENV_SETTINGS \
 285         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 286         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 287         "image_uboot=ventana/u-boot_spi.imx\0" \
 288         \
 289         "spi_koffset=0x90000\0" \
 290         "spi_klen=0x200000\0" \
 291         \
 292         "spi_updateuboot=echo Updating uboot from " \
 293                 "${serverip}:${image_uboot}...; " \
 294                 "tftpboot ${loadaddr} ${image_uboot} && " \
 295                 "sf probe && sf erase 0 80000 && " \
 296                         "sf write ${loadaddr} 400 ${filesize}\0" \
 297         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 298                 "to ${spi_koffset} ...; " \
 299                 "tftp ${loadaddr} ${image_os} && " \
 300                 "sf probe && " \
 301                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 302         \
 303         "flash_boot=" \
 304                 "if sf probe && " \
 305                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 306                         "setenv bootargs console=${console},${baudrate} " \
 307                                 "root=/dev/mtdblock3 " \
 308                                 "rootfstype=squashfs,jffs2 " \
 309                                 "${video} ${extra}; " \
 310                         "bootm; " \
 311                 "fi\0"
 312 #else
 313         #define CONFIG_EXTRA_ENV_SETTINGS \
 314         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 315         \
 316         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 317         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 318                 "tftp ${loadaddr} ${image_rootfs} && " \
 319                 "nand erase.part rootfs && " \
 320                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 321         \
 322         "flash_boot=" \
 323                 "setenv fsload 'ubifsload'; " \
 324                 "ubi part rootfs; " \
 325                 "if ubi check boot; then " \
 326                         "ubifsmount ubi0:boot; " \
 327                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 328                                 "rootfstype=squashfs,ubifs; " \
 329                         "setenv bootdir; " \
 330                 "elif ubi check rootfs; then " \
 331                         "ubifsmount ubi0:rootfs; " \
 332                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 333                                 "rootfstype=ubifs; " \
 334                 "fi; " \
 335                 "setenv dtype nand; run loadscript; " \
 336                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 337                         "setenv bootargs console=${console},${baudrate} " \
 338                                 "root=${root} ${video} ${extra}; " \
 339                         "if run loadfdt; then " \
 340                                 "ubifsumount; " \
 341                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 342                         "else " \
 343                                 "ubifsumount; bootm; " \
 344                         "fi; " \
 345                 "fi\0"
 346 #endif
 347
 348 #define CONFIG_BOOTCOMMAND \
 349         "for btype in ${bootdevs}; do " \
 350                 "echo; echo Attempting ${btype} boot...; " \
 351                 "if run ${btype}_boot; then; fi; " \
 352         "done"
 353
 354 #endif                         /* __CONFIG_H */