1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
5 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
7 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
9 * Configuration for the flea3 board.
15 #include <asm/arch/imx-regs.h>
17 /* High Level Configuration Options */
20 #define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
22 /* Set TEXT at the beginning of the NOR flash */
24 /* This is required to setup the ESDC controller */
26 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
27 #define CONFIG_REVISION_TAG
28 #define CONFIG_SETUP_MEMORY_TAGS
29 #define CONFIG_INITRD_TAG
32 * Size of malloc() pool
34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
39 #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
44 #define CONFIG_MXC_UART_BASE UART3_BASE
50 #define CONFIG_NET_RETRY_COUNT 100
53 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
56 * Ethernet on SOC (FEC)
58 #define CONFIG_FEC_MXC
59 #define IMX_FEC_BASE FEC_BASE_ADDR
60 #define CONFIG_FEC_MXC_PHYADDR 0x1
62 #define CONFIG_ARP_TIMEOUT 200UL
65 * Miscellaneous configurable options
68 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
69 /* Print Buffer Size */
70 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
72 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
77 #define PHYS_SDRAM_1 CSD0_BASE_ADDR
78 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
80 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
81 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
82 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
83 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
84 GENERATED_GBL_DATA_SIZE)
85 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
86 CONFIG_SYS_GBL_DATA_OFFSET)
89 * MTD Command for mtdparts
93 * FLASH and environment organization
95 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
96 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
97 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
98 /* Monitor at beginning of flash */
99 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
100 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
102 /* Address and size of Redundant Environment Sector */
105 * CFI FLASH driver setup
108 /* A non-standard buffered write algorithm */
111 * NAND FLASH driver setup
113 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
114 #define CONFIG_SYS_MAX_NAND_DEVICE 1
115 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
116 #define CONFIG_MXC_NAND_HWECC
117 #define CONFIG_SYS_NAND_LARGEPAGE
120 * Default environment and default scripts
121 * to update uboot and load kernel
124 #define CONFIG_HOSTNAME "flea3"
125 #define CONFIG_EXTRA_ENV_SETTINGS \
127 "nfsargs=setenv bootargs root=/dev/nfs rw " \
128 "nfsroot=${serverip}:${rootpath}\0" \
129 "ramargs=setenv bootargs root=/dev/ram rw\0" \
130 "addip_sta=setenv bootargs ${bootargs} " \
131 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
132 ":${hostname}:${netdev}:off panic=1\0" \
133 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
134 "addip=if test -n ${ipdyn};then run addip_dyn;" \
135 "else run addip_sta;fi\0" \
136 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
137 "addtty=setenv bootargs ${bootargs}" \
138 " console=ttymxc2,${baudrate}\0" \
139 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
140 "loadaddr=80800000\0" \
141 "kernel_addr_r=80800000\0" \
142 "hostname=" CONFIG_HOSTNAME "\0" \
143 "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
144 "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \
145 "flash_self=run ramargs addip addtty addmtd addmisc;" \
146 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
147 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
148 "bootm ${kernel_addr}\0" \
149 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
150 "run nfsargs addip addtty addmtd addmisc;" \
151 "bootm ${kernel_addr_r}\0" \
152 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
153 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
154 "net_self=if run net_self_load;then " \
155 "run ramargs addip addtty addmtd addmisc;" \
156 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
157 "else echo Images not loades;fi\0" \
158 "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
159 "load=tftp ${loadaddr} ${u-boot}\0" \
160 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
161 "update=protect off ${uboot_addr} +80000;" \
162 "erase ${uboot_addr} +80000;" \
163 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
164 "upd=if run load;then echo Updating u-boot;if run update;" \
165 "then echo U-Boot updated;" \
166 "else echo Error updating u-boot !;" \
167 "echo Board without bootloader !!;" \
169 "else echo U-Boot not downloaded..exiting;fi\0" \
170 "bootcmd=run net_nfs\0"
172 #endif /* __CONFIG_H */