include/configs/el6x_common.h

   1 /*
   2  * Copyright (C) Stefano Babic <sbabic@denx.de>
   3  *
   4  * Configuration settings for the E+L i.MX6Q DO82 board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __EL6Q_COMMON_CONFIG_H
  10 #define __EL6Q_COMMON_CONFIG_H
  11
  12 #define CONFIG_BOARD_NAME               EL6Q
  13
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_IMX_THERMAL
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  20
  21 #define CONFIG_MXC_UART
  22
  23 #ifdef CONFIG_SPL
  24 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  25 #define CONFIG_SPL_SPI_LOAD
  26 #include "imx6_spl.h"
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  31 #define CONFIG_SYS_FSL_USDHC_NUM        2
  32
  33 /* I2C config */
  34 #define CONFIG_SYS_I2C
  35 #define CONFIG_SYS_I2C_MXC
  36 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  37 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  38 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  39 #define CONFIG_SYS_I2C_SPEED                    100000
  40
  41 /* PMIC */
  42 #define CONFIG_POWER
  43 #define CONFIG_POWER_I2C
  44 #define CONFIG_POWER_PFUZE100
  45 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  46
  47 /* Commands */
  48 #define CONFIG_SF_DEFAULT_BUS           3
  49 #define CONFIG_SF_DEFAULT_CS            0
  50 #define CONFIG_SF_DEFAULT_SPEED         20000000
  51 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  52
  53 /* allow to overwrite serial and ethaddr */
  54 #define CONFIG_ENV_OVERWRITE
  55 #define CONFIG_MXC_UART_BASE    UART2_BASE
  56
  57 #define CONFIG_BOARD_NAME       EL6Q
  58
  59 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  60 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
  61         "board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
  62         "cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
  63         "chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \
  64         "console=" CONSOLE_DEV "\0"                                     \
  65         "fdtfile=undefined\0" \
  66         "fdt_high=0xffffffff\0" \
  67         "fdt_addr_r=0x18000000\0" \
  68         "fdt_addr=0x18000000\0" \
  69         "findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
  70         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  71         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  72         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  73         BOOTENV
  74
  75 #define BOOT_TARGET_DEVICES(func) \
  76         func(MMC, mmc, 0) \
  77         func(MMC, mmc, 1) \
  78         func(PXE, PXE, na) \
  79         func(DHCP, dhcp, na)
  80
  81 #include <config_distro_bootcmd.h>
  82
  83 #define CONFIG_ARP_TIMEOUT     200UL
  84
  85 #define CONFIG_CMD_MEMTEST
  86
  87 #define CONFIG_SYS_MEMTEST_START       0x10000000
  88 #define CONFIG_SYS_MEMTEST_END         0x10800000
  89 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
  90
  91 /* Physical Memory Map */
  92 #define CONFIG_NR_DRAM_BANKS           1
  93 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  94
  95 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  96 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  97 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  98
  99 #define CONFIG_SYS_INIT_SP_OFFSET \
 100         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 101 #define CONFIG_SYS_INIT_SP_ADDR \
 102         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 103
 104 /* environment organization */
 105
 106 #define CONFIG_ENV_SIZE                 (8 * 1024)
 107
 108 #if defined(CONFIG_ENV_IS_IN_MMC)
 109 #define CONFIG_SYS_MMC_ENV_DEV          1
 110 #define CONFIG_SYS_MMC_ENV_PART         2
 111 #define CONFIG_ENV_OFFSET               0x0
 112 #endif
 113
 114 #endif                         /* __EL6Q_COMMON_CONFIG_H */