include/configs/eb_cpu5282.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
   4  *
   5  * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
   6  */
   7
   8 #ifndef _CONFIG_EB_CPU5282_H_
   9 #define _CONFIG_EB_CPU5282_H_
  10
  11 #undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
  12
  13 /*----------------------------------------------------------------------*
  14  * High Level Configuration Options (easy to change)                    *
  15  *----------------------------------------------------------------------*/
  16
  17 #define CONFIG_MCFUART
  18 #define CONFIG_SYS_UART_PORT            (0)
  19
  20 #undef  CONFIG_MONITOR_IS_IN_RAM                /* starts uboot direct */
  21
  22 #define CONFIG_BOOTCOMMAND "printenv"
  23
  24 /*----------------------------------------------------------------------*
  25  * Options                                                              *
  26  *----------------------------------------------------------------------*/
  27
  28 #define CONFIG_BOOT_RETRY_TIME  -1
  29 #define CONFIG_RESET_TO_RETRY
  30
  31 #define CONFIG_HW_WATCHDOG
  32
  33 #define STATUS_LED_ACTIVE               0
  34
  35 /*----------------------------------------------------------------------*
  36  * Configuration for environment                                        *
  37  * Environment is in the second sector of the first 256k of flash       *
  38  *----------------------------------------------------------------------*/
  39
  40 /*
  41  * BOOTP options
  42  */
  43 #define CONFIG_BOOTP_BOOTFILESIZE
  44
  45 #define CONFIG_MCFTMR
  46
  47 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size      */
  48 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  49
  50 /*#define CONFIG_SYS_DRAM_TEST          1 */
  51 #undef CONFIG_SYS_DRAM_TEST
  52
  53 /*----------------------------------------------------------------------*
  54  * Clock and PLL Configuration                                          *
  55  *----------------------------------------------------------------------*/
  56 #define CONFIG_SYS_CLK                  80000000      /* 8MHz * 8 */
  57
  58 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
  59
  60 #define CONFIG_SYS_MFD          0x02    /* PLL Multiplication Factor Devider */
  61 #define CONFIG_SYS_RFD          0x00    /* PLL Reduce Frecuency Devider */
  62
  63 /*----------------------------------------------------------------------*
  64  * Network                                                              *
  65  *----------------------------------------------------------------------*/
  66
  67 #ifdef CONFIG_MCFFEC
  68 #define CONFIG_MII_INIT                 1
  69 #define CONFIG_SYS_DISCOVER_PHY
  70 #define CONFIG_SYS_RX_ETH_BUFFER        8
  71 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  72 #define CONFIG_OVERWRITE_ETHADDR_ONCE
  73 #endif
  74
  75 /*-------------------------------------------------------------------------
  76  * Low Level Configuration Settings
  77  * (address mappings, register initial values, etc.)
  78  * You should know what you are doing if you make changes here.
  79  *-----------------------------------------------------------------------*/
  80
  81 #define CONFIG_SYS_MBAR                 0x40000000
  82
  83 /*-----------------------------------------------------------------------
  84  * Definitions for initial stack pointer and data area (in DPRAM)
  85  *-----------------------------------------------------------------------*/
  86
  87 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
  88 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  89 #define CONFIG_SYS_GBL_DATA_OFFSET      \
  90         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  91 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  92
  93 /*-----------------------------------------------------------------------
  94  * Start addresses for the final memory configuration
  95  * (Set up by the startup code)
  96  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  97  */
  98 #define CONFIG_SYS_SDRAM_BASE0          0x00000000
  99 #define CONFIG_SYS_SDRAM_SIZE0          16      /* SDRAM size in MB */
 100
 101 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_SDRAM_BASE0
 102 #define CONFIG_SYS_SDRAM_SIZE           CONFIG_SYS_SDRAM_SIZE0
 103
 104 #define CONFIG_SYS_MONITOR_LEN          0x20000
 105 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 106
 107 /*
 108  * For booting Linux, the board info and command line data
 109  * have to be in the first 8 MB of memory, since this is
 110  * the maximum mapped by the Linux kernel during initialization ??
 111  */
 112 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20) /* Initial Memory map for Linux */
 113
 114 /*-----------------------------------------------------------------------
 115  * FLASH organization
 116  */
 117 #define CONFIG_FLASH_SHOW_PROGRESS      45
 118
 119 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 120 #define CONFIG_SYS_INT_FLASH_BASE       0xF0000000
 121 #define CONFIG_SYS_INT_FLASH_ENABLE     0x21
 122
 123 #define CONFIG_SYS_MAX_FLASH_SECT       128
 124 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 125 #define CONFIG_SYS_FLASH_ERASE_TOUT     10000000
 126
 127 #define CONFIG_SYS_FLASH_SIZE           16*1024*1024
 128 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 129
 130 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 131
 132 /*-----------------------------------------------------------------------
 133  * Cache Configuration
 134  */
 135
 136 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 137                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 138 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 139                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 140 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV + CF_CACR_DCM)
 141 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 142                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 143                                          CF_ACR_EN | CF_ACR_SM_ALL)
 144 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_DISD | \
 145                                          CF_CACR_CEIB | CF_CACR_DBWE | \
 146                                          CF_CACR_EUSP)
 147
 148 /*-----------------------------------------------------------------------
 149  * Memory bank definitions
 150  */
 151
 152 #define CONFIG_SYS_CS0_BASE             0xFF000000
 153 #define CONFIG_SYS_CS0_CTRL             0x00001980
 154 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 155
 156 #define CONFIG_SYS_CS2_BASE             0xE0000000
 157 #define CONFIG_SYS_CS2_CTRL             0x00001980
 158 #define CONFIG_SYS_CS2_MASK             0x000F0001
 159
 160 #define CONFIG_SYS_CS3_BASE             0xE0100000
 161 #define CONFIG_SYS_CS3_CTRL             0x00001980
 162 #define CONFIG_SYS_CS3_MASK             0x000F0001
 163
 164 /*-----------------------------------------------------------------------
 165  * Port configuration
 166  */
 167 #define CONFIG_SYS_PACNT                0x0000000       /* Port A D[31:24] */
 168 #define CONFIG_SYS_PADDR                0x0000000
 169 #define CONFIG_SYS_PADAT                0x0000000
 170
 171 #define CONFIG_SYS_PBCNT                0x0000000       /* Port B D[23:16] */
 172 #define CONFIG_SYS_PBDDR                0x0000000
 173 #define CONFIG_SYS_PBDAT                0x0000000
 174
 175 #define CONFIG_SYS_PCCNT                0x0000000       /* Port C D[15:08] */
 176 #define CONFIG_SYS_PCDDR                0x0000000
 177 #define CONFIG_SYS_PCDAT                0x0000000
 178
 179 #define CONFIG_SYS_PDCNT                0x0000000       /* Port D D[07:00] */
 180 #define CONFIG_SYS_PCDDR                0x0000000
 181 #define CONFIG_SYS_PCDAT                0x0000000
 182
 183 #define CONFIG_SYS_PASPAR               0x0F0F
 184 #define CONFIG_SYS_PEHLPAR              0xC0
 185 #define CONFIG_SYS_PUAPAR               0x0F
 186 #define CONFIG_SYS_DDRUA                0x05
 187 #define CONFIG_SYS_PJPAR                0xFF
 188
 189 /*-----------------------------------------------------------------------
 190  * I2C
 191  */
 192
 193 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 194
 195 #ifdef CONFIG_CMD_DATE
 196 #define CONFIG_RTC_DS1338
 197 #define CONFIG_I2C_RTC_ADDR             0x68
 198 #endif
 199
 200 /*-----------------------------------------------------------------------
 201  * VIDEO configuration
 202  */
 203
 204 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN       2
 205 #define CONFIG_SYS_VCXK_DOUBLEBUFFERED          1
 206 #define CONFIG_SYS_VCXK_BASE                    CONFIG_SYS_CS2_BASE
 207
 208 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT        MCFGPTB_GPTPORT
 209 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR         MCFGPTB_GPTDDR
 210 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN         0x0001
 211
 212 #define CONFIG_SYS_VCXK_ENABLE_PORT             MCFGPTB_GPTPORT
 213 #define CONFIG_SYS_VCXK_ENABLE_DDR              MCFGPTB_GPTDDR
 214 #define CONFIG_SYS_VCXK_ENABLE_PIN              0x0002
 215
 216 #define CONFIG_SYS_VCXK_REQUEST_PORT            MCFGPTB_GPTPORT
 217 #define CONFIG_SYS_VCXK_REQUEST_DDR             MCFGPTB_GPTDDR
 218 #define CONFIG_SYS_VCXK_REQUEST_PIN             0x0004
 219
 220 #define CONFIG_SYS_VCXK_INVERT_PORT             MCFGPIO_PORTE
 221 #define CONFIG_SYS_VCXK_INVERT_DDR              MCFGPIO_DDRE
 222 #define CONFIG_SYS_VCXK_INVERT_PIN              MCFGPIO_PORT2
 223
 224 #endif  /* _CONFIG_M5282EVB_H */
 225 /*---------------------------------------------------------------------*/