include/configs/dra7xx_evm.h

   1 /*
   2  * (C) Copyright 2013
   3  * Texas Instruments Incorporated.
   4  * Lokesh Vutla   <lokeshvutla@ti.com>
   5  *
   6  * Configuration settings for the TI DRA7XX board.
   7  * See ti_omap5_common.h for omap5 common settings.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_DRA7XX_EVM_H
  13 #define __CONFIG_DRA7XX_EVM_H
  14
  15 #define CONFIG_DRA7XX
  16 #define CONFIG_BOARD_EARLY_INIT_F
  17
  18 #ifdef CONFIG_SPL_BUILD
  19 #define CONFIG_IODELAY_RECALIBRATION
  20 #endif
  21
  22 #define CONFIG_VERY_BIG_RAM
  23 #define CONFIG_NR_DRAM_BANKS            2
  24 #define CONFIG_MAX_MEM_MAPPED           0x80000000
  25
  26 #ifndef CONFIG_QSPI_BOOT
  27 /* MMC ENV related defines */
  28 #define CONFIG_ENV_IS_IN_MMC
  29 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  30 #define CONFIG_ENV_SIZE                 (128 << 10)
  31 #define CONFIG_ENV_OFFSET               0xE0000
  32 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  33 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  34 #endif
  35
  36 #if (CONFIG_CONS_INDEX == 1)
  37 #define CONSOLEDEV                      "ttyO0"
  38 #elif (CONFIG_CONS_INDEX == 3)
  39 #define CONSOLEDEV                      "ttyO2"
  40 #endif
  41 #define CONFIG_SYS_NS16550_COM1         UART1_BASE      /* Base EVM has UART0 */
  42 #define CONFIG_SYS_NS16550_COM2         UART2_BASE      /* UART2 */
  43 #define CONFIG_SYS_NS16550_COM3         UART3_BASE      /* UART3 */
  44 #define CONFIG_BAUDRATE                 115200
  45
  46 #define CONFIG_SYS_OMAP_ABE_SYSCK
  47
  48 #ifndef CONFIG_SPL_BUILD
  49 /* Define the default GPT table for eMMC */
  50 #define PARTS_DEFAULT \
  51         /* Linux partitions */ \
  52         "uuid_disk=${uuid_gpt_disk};" \
  53         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  54         /* Android partitions */ \
  55         "partitions_android=" \
  56         "uuid_disk=${uuid_gpt_disk};" \
  57         "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \
  58         "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \
  59         "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
  60         "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
  61         "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \
  62         "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
  63         "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
  64         "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
  65         "name=system,size=768M,uuid=${uuid_gpt_system};" \
  66         "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
  67         "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
  68         "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
  69         "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
  70
  71 #define DFU_ALT_INFO_MMC \
  72         "dfu_alt_info_mmc=" \
  73         "boot part 0 1;" \
  74         "rootfs part 0 2;" \
  75         "MLO fat 0 1;" \
  76         "MLO.raw raw 0x100 0x100;" \
  77         "u-boot.img.raw raw 0x300 0x400;" \
  78         "spl-os-args.raw raw 0x80 0x80;" \
  79         "spl-os-image.raw raw 0x900 0x2000;" \
  80         "spl-os-args fat 0 1;" \
  81         "spl-os-image fat 0 1;" \
  82         "u-boot.img fat 0 1;" \
  83         "uEnv.txt fat 0 1\0"
  84
  85 #define DFU_ALT_INFO_EMMC \
  86         "dfu_alt_info_emmc=" \
  87         "rawemmc raw 0 3751936;" \
  88         "boot part 1 1;" \
  89         "rootfs part 1 2;" \
  90         "MLO fat 1 1;" \
  91         "MLO.raw raw 0x100 0x100;" \
  92         "u-boot.img.raw raw 0x300 0x400;" \
  93         "spl-os-args.raw raw 0x80 0x80;" \
  94         "spl-os-image.raw raw 0x900 0x2000;" \
  95         "spl-os-args fat 1 1;" \
  96         "spl-os-image fat 1 1;" \
  97         "u-boot.img fat 1 1;" \
  98         "uEnv.txt fat 1 1\0"
  99
 100 #define DFU_ALT_INFO_RAM \
 101         "dfu_alt_info_ram=" \
 102         "kernel ram 0x80200000 0x4000000;" \
 103         "fdt ram 0x80f80000 0x80000;" \
 104         "ramdisk ram 0x81000000 0x4000000\0"
 105
 106 #define DFU_ALT_INFO_QSPI \
 107         "dfu_alt_info_qspi=" \
 108         "MLO raw 0x0 0x010000;" \
 109         "MLO.backup1 raw 0x010000 0x010000;" \
 110         "MLO.backup2 raw 0x020000 0x010000;" \
 111         "MLO.backup3 raw 0x030000 0x010000;" \
 112         "u-boot.img raw 0x040000 0x0100000;" \
 113         "u-boot-spl-os raw 0x140000 0x080000;" \
 114         "u-boot-env raw 0x1C0000 0x010000;" \
 115         "u-boot-env.backup raw 0x1D0000 0x010000;" \
 116         "kernel raw 0x1E0000 0x800000\0"
 117
 118 #define DFUARGS \
 119         "dfu_bufsiz=0x10000\0" \
 120         DFU_ALT_INFO_MMC \
 121         DFU_ALT_INFO_EMMC \
 122         DFU_ALT_INFO_RAM \
 123         DFU_ALT_INFO_QSPI
 124
 125 /* Fastboot */
 126 #define CONFIG_USB_FUNCTION_FASTBOOT
 127 #define CONFIG_CMD_FASTBOOT
 128 #define CONFIG_ANDROID_BOOT_IMAGE
 129 #define CONFIG_FASTBOOT_BUF_ADDR    CONFIG_SYS_LOAD_ADDR
 130 #define CONFIG_FASTBOOT_BUF_SIZE    0x2F000000
 131 #define CONFIG_FASTBOOT_FLASH
 132 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 133 #endif
 134
 135 #include <configs/ti_omap5_common.h>
 136
 137 /* Enhance our eMMC support / experience. */
 138 #define CONFIG_CMD_GPT
 139 #define CONFIG_EFI_PARTITION
 140 #define CONFIG_RANDOM_UUID
 141 #define CONFIG_HSMMC2_8BIT
 142
 143 /* CPSW Ethernet */
 144 #define CONFIG_BOOTP_DNS                /* Configurable parts of CMD_DHCP */
 145 #define CONFIG_BOOTP_DNS2
 146 #define CONFIG_BOOTP_SEND_HOSTNAME
 147 #define CONFIG_BOOTP_GATEWAY
 148 #define CONFIG_BOOTP_SUBNETMASK
 149 #define CONFIG_NET_RETRY_COUNT          10
 150 #define CONFIG_DRIVER_TI_CPSW           /* Driver for IP block */
 151 #define CONFIG_MII                      /* Required in net/eth.c */
 152 #define CONFIG_PHY_GIGE                 /* per-board part of CPSW */
 153 #define CONFIG_PHYLIB
 154 #define CONFIG_PHY_TI
 155
 156 /* SPI */
 157 #undef  CONFIG_OMAP3_SPI
 158 #define CONFIG_TI_SPI_MMAP
 159 #define CONFIG_SF_DEFAULT_SPEED                76800000
 160 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 161 #define CONFIG_QSPI_QUAD_SUPPORT
 162
 163 #ifdef CONFIG_SPL_BUILD
 164 #undef CONFIG_DM_SPI
 165 #undef CONFIG_DM_SPI_FLASH
 166 #endif
 167
 168 /*
 169  * Default to using SPI for environment, etc.
 170  * 0x000000 - 0x010000 : QSPI.SPL (64KiB)
 171  * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB)
 172  * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB)
 173  * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB)
 174  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
 175  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
 176  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
 177  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
 178  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
 179  * 0x9E0000 - 0x2000000 : USERLAND
 180  */
 181 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
 182 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
 183 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 184 #if defined(CONFIG_QSPI_BOOT)
 185 /* In SPL, use the environment and discard MMC support for space. */
 186 #ifdef CONFIG_SPL_BUILD
 187 #undef CONFIG_SPL_MMC_SUPPORT
 188 #endif
 189 #define CONFIG_ENV_IS_IN_SPI_FLASH
 190 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 191 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 192 #define CONFIG_ENV_SIZE                 (64 << 10)
 193 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64 KB sectors */
 194 #define CONFIG_ENV_OFFSET               0x1C0000
 195 #define CONFIG_ENV_OFFSET_REDUND        0x1D0000
 196 #endif
 197
 198 /* SPI SPL */
 199 #define CONFIG_SPL_SPI_SUPPORT
 200 #define CONFIG_TI_EDMA3
 201 #define CONFIG_SPL_SPI_LOAD
 202 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 203 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 204
 205 #define CONFIG_SUPPORT_EMMC_BOOT
 206
 207 /* USB xHCI HOST */
 208 #define CONFIG_USB_XHCI_OMAP
 209 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 210
 211 #define CONFIG_OMAP_USB_PHY
 212 #define CONFIG_OMAP_USB2PHY2_HOST
 213
 214 /* USB Device Firmware Update support */
 215 #define CONFIG_USB_FUNCTION_DFU
 216 #define CONFIG_DFU_RAM
 217
 218 #define CONFIG_DFU_MMC
 219 #define CONFIG_DFU_RAM
 220 #define CONFIG_DFU_SF
 221
 222 /* SATA */
 223 #define CONFIG_BOARD_LATE_INIT
 224 #define CONFIG_SCSI
 225 #define CONFIG_LIBATA
 226 #define CONFIG_SCSI_AHCI
 227 #define CONFIG_SCSI_AHCI_PLAT
 228 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 229 #define CONFIG_SYS_SCSI_MAX_LUN         1
 230 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 231                                                 CONFIG_SYS_SCSI_MAX_LUN)
 232
 233 /* NAND support */
 234 #ifdef CONFIG_NAND
 235 /* NAND: device related configs */
 236 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 237 #define CONFIG_SYS_NAND_OOBSIZE         64
 238 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 239 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 240 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 241                                          CONFIG_SYS_NAND_PAGE_SIZE)
 242 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 243 /* NAND: driver related configs */
 244 #define CONFIG_NAND_OMAP_GPMC
 245 #define CONFIG_NAND_OMAP_ELM
 246 #define CONFIG_SYS_NAND_ONFI_DETECTION
 247 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 248 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 249 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 250                                          10, 11, 12, 13, 14, 15, 16, 17, \
 251                                          18, 19, 20, 21, 22, 23, 24, 25, \
 252                                          26, 27, 28, 29, 30, 31, 32, 33, \
 253                                          34, 35, 36, 37, 38, 39, 40, 41, \
 254                                          42, 43, 44, 45, 46, 47, 48, 49, \
 255                                          50, 51, 52, 53, 54, 55, 56, 57, }
 256 #define CONFIG_SYS_NAND_ECCSIZE         512
 257 #define CONFIG_SYS_NAND_ECCBYTES        14
 258 #define MTDIDS_DEFAULT                  "nand0=nand.0"
 259 #define MTDPARTS_DEFAULT                "mtdparts=nand.0:" \
 260                                         "128k(NAND.SPL)," \
 261                                         "128k(NAND.SPL.backup1)," \
 262                                         "128k(NAND.SPL.backup2)," \
 263                                         "128k(NAND.SPL.backup3)," \
 264                                         "256k(NAND.u-boot-spl-os)," \
 265                                         "1m(NAND.u-boot)," \
 266                                         "128k(NAND.u-boot-env)," \
 267                                         "128k(NAND.u-boot-env.backup1)," \
 268                                         "8m(NAND.kernel)," \
 269                                         "-(NAND.file-system)"
 270 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 271 /* NAND: SPL related configs */
 272 #ifdef CONFIG_SPL_NAND_SUPPORT
 273 #define CONFIG_SPL_NAND_AM33XX_BCH
 274 #endif
 275 /* NAND: SPL falcon mode configs */
 276 #ifdef CONFIG_SPL_OS_BOOT
 277 #define CONFIG_CMD_SPL_NAND_OFS         0x00080000 /* os-boot params*/
 278 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
 279 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 280 #endif
 281 #endif /* !CONFIG_NAND */
 282
 283 /* Parallel NOR Support */
 284 #if defined(CONFIG_NOR)
 285 /* NOR: device related configs */
 286 #define CONFIG_SYS_MAX_FLASH_SECT       512
 287 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 288 #define CONFIG_SYS_FLASH_SIZE           (64 * 1024 * 1024) /* 64 MB */
 289 /* #define CONFIG_INIT_IGNORE_ERROR */
 290 #undef CONFIG_SYS_NO_FLASH
 291 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 292 #define CONFIG_SYS_FLASH_PROTECTION
 293 #define CONFIG_SYS_FLASH_CFI
 294 #define CONFIG_FLASH_CFI_DRIVER
 295 #define CONFIG_FLASH_CFI_MTD
 296 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 297 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
 298 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 299 /* Reduce SPL size by removing unlikey targets */
 300 #ifdef CONFIG_NOR_BOOT
 301 #define CONFIG_ENV_IS_IN_FLASH
 302 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)    /* 128 KiB */
 303 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0"
 304 #define MTDPARTS_DEFAULT                "mtdparts=physmap-flash.0:" \
 305                                         "128k(NOR.SPL)," \
 306                                         "128k(NOR.SPL.backup1)," \
 307                                         "128k(NOR.SPL.backup2)," \
 308                                         "128k(NOR.SPL.backup3)," \
 309                                         "256k(NOR.u-boot-spl-os)," \
 310                                         "1m(NOR.u-boot)," \
 311                                         "128k(NOR.u-boot-env)," \
 312                                         "128k(NOR.u-boot-env.backup1)," \
 313                                         "8m(NOR.kernel)," \
 314                                         "-(NOR.rootfs)"
 315 #define CONFIG_ENV_OFFSET               0x001c0000
 316 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
 317 #endif
 318 #endif  /* NOR support */
 319
 320 /* EEPROM */
 321 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50
 322 #define CONFIG_EEPROM_BUS_ADDRESS 0
 323
 324 #endif /* __CONFIG_DRA7XX_EVM_H */