include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  20
  21 /*
  22  * High Level Configuration Options (easy to change)
  23  */
  24 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  25 #define CONFIG_KW88F6281                /* SOC Name */
  26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_SYS_MVFS
  32
  33 #define CONFIG_NR_DRAM_BANKS            1
  34
  35 /*
  36  * mv-common.h should be defined after CMD configs since it used them
  37  * to enable certain macros
  38  */
  39 #include "mv-common.h"
  40
  41 /* Remove or override few declarations from mv-common.h */
  42
  43 /*
  44  * Ethernet Driver configuration
  45  */
  46 #ifdef CONFIG_CMD_NET
  47 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  48 #define CONFIG_NETCONSOLE
  49 #endif
  50
  51 /*
  52  * SATA Driver configuration
  53  */
  54 #ifdef CONFIG_MVSATA_IDE
  55 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  56 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  57 #endif
  58
  59 /*
  60  * RTC driver configuration
  61  */
  62 #ifdef CONFIG_CMD_DATE
  63 #define CONFIG_RTC_MV
  64 #endif
  65
  66 /*
  67  * Enable GPI0 support
  68  */
  69 #define CONFIG_KIRKWOOD_GPIO
  70
  71 /*
  72  * Environment variables configurations
  73  */
  74 #ifdef CONFIG_CMD_NAND
  75 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  76 #endif
  77
  78 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  79 #define CONFIG_ENV_ADDR                 0xe0000
  80 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  81
  82 /*
  83  * Default environment variables
  84  */
  85 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
  86
  87 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
  88         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
  89
  90 #define CONFIG_EXTRA_ENV_SETTINGS \
  91         "stdin=serial\0" \
  92         "stdout=serial\0" \
  93         "stderr=serial\0" \
  94         "loadaddr=0x800000\0" \
  95         "autoload=no\0" \
  96         "console=ttyS0,115200\0" \
  97         "mtdparts="MTDPARTS_DEFAULT \
  98         "optargs=\0" \
  99         "bootenv=uEnv.txt\0" \
 100         "importbootenv=echo Importing environment ...; " \
 101                 "env import -t ${loadaddr} ${filesize}\0" \
 102         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 103         "setbootargs=setenv bootargs console=${console} " \
 104                 "${optargs} " \
 105                 "${mtdparts} " \
 106                 "root=${bootenvroot} " \
 107                 "rootfstype=${bootenvrootfstype}\0" \
 108         "subbootcmd=run setbootargs; " \
 109                 "if run bootenvloadimage; then " \
 110                         "bootm ${loadaddr};" \
 111                 "fi;\0" \
 112         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 113         "nandrootfstype=ubifs\0" \
 114         "nandloadimage=nand read ${loadaddr} kernel\0" \
 115         "setnandbootenv=echo Booting from nand ...; " \
 116                 "setenv bootenvroot ${nandroot}; " \
 117                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 118                 "setenv bootenvloadimage ${nandloadimage}\0"
 119
 120 #define CONFIG_BOOTCOMMAND \
 121         "if test -n ${bootenv} && usb start; then " \
 122                 "if run loadbootenv; then " \
 123                         "echo Loaded environment ${bootenv} from usb;" \
 124                         "run importbootenv;" \
 125                 "fi;" \
 126                 "if test -n ${bootenvcmd}; then " \
 127                         "echo Running bootenvcmd ...;" \
 128                         "run bootenvcmd;" \
 129                 "fi;" \
 130         "fi;" \
 131         "run setnandbootenv subbootcmd;"
 132
 133 #endif /* _CONFIG_DNS325_H */