include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define MACH_TYPE_DNS325                3800
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21 #define CONFIG_IDENT_STRING             "\nD-Link DNS-325"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29
  30 /*
  31  * Commands configuration
  32  */
  33 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  34 #define CONFIG_CMD_DHCP
  35 #define CONFIG_CMD_ENV
  36 #define CONFIG_CMD_NAND
  37 #define CONFIG_CMD_PING
  38 #define CONFIG_CMD_USB
  39 #define CONFIG_CMD_IDE
  40 #define CONFIG_CMD_DATE
  41 #define CONFIG_SYS_MVFS
  42
  43 #define CONFIG_NR_DRAM_BANKS            1
  44
  45 /*
  46  * mv-common.h should be defined after CMD configs since it used them
  47  * to enable certain macros
  48  */
  49 #include "mv-common.h"
  50
  51 /* Remove or override few declarations from mv-common.h */
  52 #undef CONFIG_SYS_PROMPT
  53
  54 /*
  55  * Ethernet Driver configuration
  56  */
  57 #ifdef CONFIG_CMD_NET
  58 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  59 #define CONFIG_NETCONSOLE
  60 #endif
  61
  62 /*
  63  * SATA Driver configuration
  64  */
  65 #ifdef CONFIG_MVSATA_IDE
  66 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  67 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  68 #endif
  69
  70 /*
  71  * RTC driver configuration
  72  */
  73 #ifdef CONFIG_CMD_DATE
  74 #define CONFIG_RTC_MV
  75 #endif
  76
  77 /*
  78  * Enable GPI0 support
  79  */
  80 #define CONFIG_KIRKWOOD_GPIO
  81
  82 /*
  83  * Console configuration
  84  */
  85 #define CONFIG_CONSOLE_MUX
  86 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  87
  88 /*
  89  * Display cpu info at boot
  90  */
  91 #define CONFIG_DISPLAY_CPUINFO
  92
  93 /*
  94  * Environment variables configurations
  95  */
  96 #ifdef CONFIG_CMD_NAND
  97 #define CONFIG_ENV_IS_IN_NAND
  98 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  99 #else
 100 #define CONFIG_ENV_IS_NOWHERE
 101 #endif
 102
 103 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 104 #define CONFIG_ENV_ADDR                 0xe0000
 105 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
 106
 107 /*
 108  * Default environment variables
 109  */
 110 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 111
 112 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
 113         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
 114
 115 #define CONFIG_EXTRA_ENV_SETTINGS \
 116         "stdin=serial\0" \
 117         "stdout=serial\0" \
 118         "stderr=serial\0" \
 119         "loadaddr=0x800000\0" \
 120         "autoload=no\0" \
 121         "console=ttyS0,115200\0" \
 122         "mtdparts="MTDPARTS_DEFAULT \
 123         "optargs=\0" \
 124         "bootenv=uEnv.txt\0" \
 125         "importbootenv=echo Importing environment ...; " \
 126                 "env import -t ${loadaddr} ${filesize}\0" \
 127         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 128         "setbootargs=setenv bootargs console=${console} " \
 129                 "${optargs} " \
 130                 "${mtdparts} " \
 131                 "root=${bootenvroot} " \
 132                 "rootfstype=${bootenvrootfstype}\0" \
 133         "subbootcmd=run setbootargs; " \
 134                 "if run bootenvloadimage; then " \
 135                         "bootm ${loadaddr};" \
 136                 "fi;\0" \
 137         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 138         "nandrootfstype=ubifs\0" \
 139         "nandloadimage=nand read ${loadaddr} kernel\0" \
 140         "setnandbootenv=echo Booting from nand ...; " \
 141                 "setenv bootenvroot ${nandroot}; " \
 142                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 143                 "setenv bootenvloadimage ${nandloadimage}\0"
 144
 145 #define CONFIG_BOOTCOMMAND \
 146         "if test -n ${bootenv} && usb start; then " \
 147                 "if run loadbootenv; then " \
 148                         "echo Loaded environment ${bootenv} from usb;" \
 149                         "run importbootenv;" \
 150                 "fi;" \
 151                 "if test -n ${bootenvcmd}; then " \
 152                         "echo Running bootenvcmd ...;" \
 153                         "run bootenvcmd;" \
 154                 "fi;" \
 155         "fi;" \
 156         "run setnandbootenv subbootcmd;"
 157
 158 #endif /* _CONFIG_DNS325_H */