include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13 #define CONFIG_CMD_SPL
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15 #define CONFIG_CMD_SPL_WRITE_SIZE       (44 * SZ_1K)
  16
  17 /* Falcon Mode - MMC support */
  18 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x3F00
  19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  \
  20         (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100   /* 128KiB */
  22
  23 /*
  24  * display5 SPI-NOR memory layout
  25  *
  26  * The definition can be found in Kconfig's
  27  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  28  *
  29  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  30  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  31  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  32  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  33  * 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
  34  * 0x540000 - 0x1540000 : SPI.swupdate-initramfs  (16MiB)
  35  * 0x1540000 - 0x1640000 : SPI.factory  (1MiB)
  36  */
  37
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_SPI_FLASH_MTD
  40 #endif
  41
  42 /* Below values are "dummy" - only to avoid build break */
  43 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x150000
  44 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
  45 #define CONFIG_SYS_SPI_ARGS_SIZE        0x10000
  46
  47 #include "imx6_spl.h"
  48 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
  49
  50 #define CONFIG_CMDLINE_TAG
  51 #define CONFIG_SETUP_MEMORY_TAGS
  52 #define CONFIG_INITRD_TAG
  53 #define CONFIG_REVISION_TAG
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  57
  58 #define CONFIG_MXC_UART_BASE            UART5_BASE
  59
  60 /* I2C Configs */
  61 #define CONFIG_SYS_I2C
  62 #define CONFIG_SYS_I2C_MXC
  63 #define CONFIG_SYS_I2C_MXC_I2C1
  64 #define CONFIG_SYS_I2C_MXC_I2C2
  65 #define CONFIG_SYS_I2C_MXC_I2C3
  66 #define CONFIG_I2C_MULTI_BUS
  67 #define CONFIG_SYS_I2C_SPEED            100000
  68 #define CONFIG_I2C_EDID
  69 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
  70
  71 /* Ethernet */
  72 #ifdef CONFIG_FEC_MXC
  73 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  74 #define CONFIG_FEC_XCV_TYPE             RGMII
  75 #define CONFIG_ETHPRIME                 "FEC"
  76 #define CONFIG_FEC_MXC_PHYADDR          0
  77 #endif
  78
  79 /* MMC Configs */
  80 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  81 #define CONFIG_SYS_FSL_USDHC_NUM        2
  82
  83 /* allow to overwrite serial and ethaddr */
  84 #define CONFIG_ENV_OVERWRITE
  85 #define CONFIG_BAUDRATE                 115200
  86
  87 #ifndef CONFIG_BOOTCOMMAND
  88 #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
  89              "run recovery;" \
  90         "else if test ${BOOT_FROM} = FACTORY; then " \
  91              "run factory_nfs;" \
  92         "else " \
  93              "run boot_mmc;" \
  94         "fi;fi"
  95 #endif
  96
  97 #define PARTS_DEFAULT \
  98         /* Linux partitions */ \
  99         "partitions=" \
 100         "uuid_disk=${uuid_gpt_disk};" \
 101         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
 102         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
 103         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
 104         "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
 105         "name=data,size=-,uuid=${uuid_gpt_data}\0"
 106
 107 #define SWUPDATE_RECOVERY_PROCEDURE \
 108         "echo '#######################';" \
 109         "echo '# RECOVERY SWUupdate  #';" \
 110         "echo '#######################';" \
 111         "echo '#######################';" \
 112         "echo '# GPT verify          #';" \
 113         "if gpt verify mmc ${mmcdev} ${partitions}; then " \
 114                 "echo '# OK !                #';" \
 115         "else " \
 116                 "echo '# FAILED !            #';" \
 117                 "echo '# GPT RESTORATION     #';" \
 118                 "gpt write mmc ${mmcdev} ${partitions};" \
 119         "fi;" \
 120         "echo '#######################';" \
 121         "setenv loadaddr_swu_initramfs 0x14000000;" \
 122         "setenv bootargs console=${console} " \
 123                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
 124                 ":${hostname}::off root=/dev/ram rw;" \
 125         "sf probe;" \
 126         "sf read ${loadaddr} swu-kernel;" \
 127         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
 128         "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
 129
 130 #define SETUP_BOOTARGS \
 131         "run set_rootfs_part;" \
 132         "setenv bootargs ${bootargs} console=${console} "         \
 133                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
 134                       "rootwait rootfstype=ext4 rw; " \
 135         "run set_kernel_part;" \
 136         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 137         "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
 138         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
 139
 140 /* All the numbers are in LBAs */
 141 #define __TFTP_UPDATE_KERNEL \
 142         "tftp_mmc_fitImg=" \
 143            "if test ! -n ${kernel_part}; then " \
 144                "setenv kernel_part ${kernel_part_active};" \
 145            "fi;" \
 146            "if tftp ${loadaddr} ${kernel_file}; then " \
 147                "setexpr fw_sz ${filesize} / 0x200; " \
 148                "setexpr fw_sz ${fw_sz} + 1; "  \
 149                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 150                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 151            "; fi\0" \
 152
 153 #define TFTP_UPDATE_KERNEL \
 154         "setenv kernel_part ${kernel_part_active};" \
 155         "run tftp_mmc_fitImg;" \
 156         "setenv kernel_part ${kernel_part_backup};" \
 157         "run tftp_mmc_fitImg;" \
 158
 159 #define __TFTP_UPDATE_ROOTFS \
 160         "tftp_mmc_rootfs=" \
 161            "if test ! -n ${rootfs_part}; then " \
 162                "setenv rootfs_part ${rootfs_part_active};" \
 163            "fi;" \
 164            "if tftp ${loadaddr} ${rootfs_file}; then " \
 165                "setexpr fw_sz ${filesize} / 0x200; " \
 166                "setexpr fw_sz ${fw_sz} + 1; "  \
 167                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 168                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 169            "; fi\0" \
 170
 171 #define TFTP_UPDATE_ROOTFS \
 172         "setenv rootfs_part ${rootfs_part_active};" \
 173         "run tftp_mmc_rootfs;" \
 174         "run tftp_mmc_rootfs_bkp;" \
 175
 176
 177 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 178         "tftp_sf_fitImg_SWU=" \
 179             "if tftp ${loadaddr} ${kernel_file}; then " \
 180                 "sf probe;" \
 181                 "sf erase swu-kernel +${filesize};" \
 182                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 183         "; fi\0"          \
 184
 185 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 186         "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
 187         "tftp_sf_initramfs_SWU=" \
 188             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 189                 "sf probe;" \
 190                 "sf erase swu-initramfs +${filesize};" \
 191                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 192         "; fi\0"          \
 193
 194 #define TFTP_UPDATE_BOOTLOADER \
 195         "ubootfile=u-boot.img\0" \
 196         "ubootfileSPL=SPL\0" \
 197         "tftp_sf_uboot=" \
 198             "if tftp ${loadaddr} ${ubootfile}; then " \
 199                 "sf probe;" \
 200                 "sf erase u-boot +${filesize};" \
 201                 "sf write ${loadaddr} u-boot ${filesize}" \
 202         "; fi\0"          \
 203         "tftp_sf_SPL="    \
 204             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 205                 "sf probe;" \
 206                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 207                 "sf erase 0x0 +${uboot_SPL_size};" \
 208                 "sf write ${loadaddr} 0x400 ${filesize};" \
 209         "fi\0" \
 210
 211 #define TFTP_UPDATE_SPINOR \
 212         "spinorfile=core-image-lwn-display5.spinor\0" \
 213         "spinorsize=0x2000000\0" \
 214         "tftp_sf_img=" \
 215             "if tftp ${loadaddr} ${spinorfile}; then " \
 216                 "sf probe;" \
 217                 "sf erase 0x0 ${spinorsize};" \
 218                 "sf write ${loadaddr} 0x0 ${filesize};" \
 219         "fi\0" \
 220
 221 #define CONFIG_EXTRA_ENV_SETTINGS         \
 222         PARTS_DEFAULT \
 223         "gpio_recovery=93\0" \
 224         "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
 225         "display=tianma-tm070-800x480\0" \
 226         "board=display5\0" \
 227         "mmcdev=0\0" \
 228         "altbootcmd=run recovery\0" \
 229         "bootdelay=1\0" \
 230         "baudrate=115200\0" \
 231         "bootcmd=" CONFIG_BOOTCOMMAND "\0" \
 232         "ethact=FEC\0" \
 233         "netdev=eth0\0" \
 234         "boot_os=y\0" \
 235         "hostname=display5\0" \
 236         "loadaddr=0x12000000\0" \
 237         "fdtaddr=0x12800000\0" \
 238         "console=ttymxc4,115200 quiet cma=256M\0" \
 239         "fdtfile=imx6q-display5.dtb\0" \
 240         "fdt_high=0xffffffff\0" \
 241         "initrd_high=0xffffffff\0" \
 242         "kernel_file=fitImage\0" \
 243         "fitImg_fw_sz=0x2200\0" \
 244         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 245         "download_kernel=" \
 246                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 247         "factory_nfs=" \
 248              "setenv ipaddr 192.168.1.102;" \
 249              "setenv gatewayip 192.168.1.1;" \
 250              "setenv netmask 255.255.255.0;" \
 251              "setenv serverip 192.168.1.2;" \
 252              "echo BOOT: FACTORY (LEG);" \
 253              "run boot_nfs\0" \
 254         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 255         "recovery=" \
 256              "echo BOOT: RECOVERY: SWU;" \
 257              "run boot_swu_recovery\0" \
 258         "boot_tftp=" \
 259         "if run download_kernel; then "   \
 260              "setenv bootargs console=${console} " \
 261              "root=/dev/mmcblk0p2 rootwait;" \
 262              "bootm ${loadaddr} - ${fdtaddr};reset;" \
 263         "fi\0" \
 264         "addip=setenv bootargs ${bootargs} " \
 265         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 266             "${hostname}:eth0:on"         \
 267         "\0"      \
 268         "nfsargs=setenv bootargs " \
 269         "root=/dev/nfs rw "       \
 270         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 271         "\0" \
 272         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 273         "boot_nfs=" \
 274         "if run download_kernel; then "   \
 275              "run nfsargs;"       \
 276              "run addip;"         \
 277              "setenv bootargs ${bootargs} console=${console};"    \
 278              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 279              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 280         "fi\0" \
 281         "falcon_setup=" \
 282         "if mmc dev ${mmcdev}; then "     \
 283              SETUP_BOOTARGS \
 284              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 285              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 286              "setexpr fw_sz ${fw_sz} + 1; "  \
 287              "mmc write ${fdtargsaddr} " \
 288              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 289         "fi\0" \
 290         "boot_mmc=" \
 291         "if mmc dev ${mmcdev}; then "     \
 292              SETUP_BOOTARGS \
 293              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 294         "fi\0" \
 295         "set_kernel_part=" \
 296         "if test ${BOOT_FROM} = ACTIVE; then " \
 297              "setenv kernel_part ${kernel_part_active};" \
 298              "echo BOOT: ACTIVE;" \
 299         "else if test ${BOOT_FROM} = BACKUP; then " \
 300              "setenv kernel_part ${kernel_part_backup};" \
 301              "echo BOOT: BACKUP;" \
 302         "else " \
 303              "run recovery;" \
 304         "fi;fi\0" \
 305         "set_rootfs_part=" \
 306         "if test ${BOOT_FROM} = ACTIVE; then " \
 307              "setenv rootfs_part ${rootfs_part_active};" \
 308         "else if test ${BOOT_FROM} = BACKUP; then " \
 309              "setenv rootfs_part ${rootfs_part_backup};" \
 310         "else " \
 311              "run recovery;" \
 312         "fi;fi\0" \
 313         "BOOT_FROM=ACTIVE\0" \
 314         TFTP_UPDATE_BOOTLOADER \
 315         TFTP_UPDATE_SPINOR \
 316         "kernel_part_active=1\0" \
 317         "kernel_part_backup=3\0" \
 318         __TFTP_UPDATE_KERNEL \
 319         "rootfs_part_active=2\0" \
 320         "rootfs_part_backup=4\0" \
 321         "rootfs_file=core-image-lwn-display5.ext4\0" \
 322         "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
 323         __TFTP_UPDATE_ROOTFS \
 324         "tftp_mmc_rootfs_bkp=" \
 325            "setenv rootfs_part ${rootfs_part_backup};" \
 326            "setenv rootfs_file ${rootfs_file_backup};" \
 327            "run tftp_mmc_rootfs\0" \
 328         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 329         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 330         "\0" \
 331
 332 /* Miscellaneous configurable options */
 333 #undef CONFIG_SYS_CBSIZE
 334 #define CONFIG_SYS_CBSIZE               2048
 335
 336 /* Print Buffer Size */
 337 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 338                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 339 #define CONFIG_SYS_MAXARGS              32
 340 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 341
 342 #define CONFIG_STANDALONE_LOAD_ADDR     0x10001000
 343 #define CONFIG_SYS_HZ                   1000
 344
 345 /* Physical Memory Map */
 346 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 347 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 348
 349 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 350 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 351
 352 #define CONFIG_SYS_INIT_SP_OFFSET \
 353         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 354 #define CONFIG_SYS_INIT_SP_ADDR \
 355         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 356
 357 /* Watchdog */
 358 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   15000
 359
 360 /* ENV config */
 361 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 362 #define CONFIG_ENV_SIZE         (SZ_64K)
 363 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 364 #define CONFIG_ENV_OFFSET               (0x120000)
 365 #define CONFIG_ENV_SECT_SIZE            (SZ_64K)
 366 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 367 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 368                                                 CONFIG_ENV_SECT_SIZE)
 369 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 370 #endif
 371
 372 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 373 #endif /* __CONFIG_H */