include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13
  14 /* Falcon Mode - MMC support */
  15
  16 /*
  17  * display5 SPI-NOR memory layout
  18  *
  19  * The definition can be found in Kconfig's
  20  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  21  *
  22  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  23  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  24  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  25  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  26  * 0x140000 - 0x740000 : SPI.swupdate-kernel-FIT (6MiB)
  27  * 0x740000 - 0x1B40000 : SPI.swupdate-initramfs  (20MiB)
  28  * 0x1B40000 - 0x1F00000 : SPI.reserved (3840KiB)
  29  * 0x1F00000 - 0x2000000 : SPI.factory  (1MiB)
  30  */
  31
  32 /* Below values are "dummy" - only to avoid build break */
  33 #define CFG_SYS_SPI_KERNEL_OFFS      0x150000
  34 #define CFG_SYS_SPI_ARGS_OFFS        0x140000
  35 #define CFG_SYS_SPI_ARGS_SIZE        0x10000
  36
  37 #define CFG_MXC_UART_BASE               UART5_BASE
  38
  39 /* MMC Configs */
  40 #define CFG_SYS_FSL_ESDHC_ADDR  0
  41 #define CFG_SYS_FSL_USDHC_NUM   2
  42
  43 #define PARTS_DEFAULT \
  44         /* Linux partitions */ \
  45         "partitions=" \
  46         "uuid_disk=${uuid_gpt_disk};" \
  47         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
  48         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
  49         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
  50         "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
  51         "name=data,size=-,uuid=${uuid_gpt_data}\0"
  52
  53 #define SWUPDATE_RECOVERY_PROCEDURE \
  54         "echo '#######################';" \
  55         "echo '# RECOVERY SWUupdate  #';" \
  56         "echo '#######################';" \
  57         "echo '#######################';" \
  58         "echo '# GPT verify          #';" \
  59         "if gpt verify mmc ${mmcdev} ${partitions}; then " \
  60                 "echo '# OK !                #';" \
  61         "else " \
  62                 "echo '# FAILED !            #';" \
  63                 "echo '# GPT RESTORATION     #';" \
  64                 "gpt write mmc ${mmcdev} ${partitions};" \
  65         "fi;" \
  66         "echo '#######################';" \
  67         "setenv loadaddr_swu_initramfs 0x14000000;" \
  68         "setenv bootargs console=${console} " \
  69                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
  70                 ":${hostname}::off root=/dev/ram rw;" \
  71         "sf probe;" \
  72         "sf read ${loadaddr} swu-kernel;" \
  73         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
  74         "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
  75
  76 #define SETUP_BOOTARGS \
  77         "run set_rootfs_part;" \
  78         "setenv bootargs ${bootargs} console=${console} "         \
  79                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
  80                       "rootwait rootfstype=ext4 rw; " \
  81         "run set_kernel_part;" \
  82         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
  83         "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
  84         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
  85
  86 /* All the numbers are in LBAs */
  87 #define __TFTP_UPDATE_KERNEL \
  88         "tftp_mmc_fitImg=" \
  89            "if test ! -n ${kernel_part}; then " \
  90                "setenv kernel_part ${kernel_part_active};" \
  91            "fi;" \
  92            "if tftp ${loadaddr} ${kernel_file}; then " \
  93                "setexpr fw_sz ${filesize} / 0x200; " \
  94                "setexpr fw_sz ${fw_sz} + 1; "  \
  95                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
  96                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
  97            "; fi\0" \
  98
  99 #define TFTP_UPDATE_KERNEL \
 100         "setenv kernel_part ${kernel_part_active};" \
 101         "run tftp_mmc_fitImg;" \
 102         "setenv kernel_part ${kernel_part_backup};" \
 103         "run tftp_mmc_fitImg;" \
 104
 105 #define __TFTP_UPDATE_ROOTFS \
 106         "tftp_mmc_rootfs=" \
 107            "if test ! -n ${rootfs_part}; then " \
 108                "setenv rootfs_part ${rootfs_part_active};" \
 109            "fi;" \
 110            "if tftp ${loadaddr} ${rootfs_file}; then " \
 111                "setexpr fw_sz ${filesize} / 0x200; " \
 112                "setexpr fw_sz ${fw_sz} + 1; "  \
 113                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 114                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 115            "; fi\0" \
 116
 117 #define TFTP_UPDATE_ROOTFS \
 118         "setenv rootfs_part ${rootfs_part_active};" \
 119         "run tftp_mmc_rootfs;" \
 120         "run tftp_mmc_rootfs_bkp;" \
 121
 122
 123 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 124         "tftp_sf_fitImg_SWU=" \
 125             "if tftp ${loadaddr} ${kernel_file}; then " \
 126                 "sf probe;" \
 127                 "sf erase swu-kernel +${filesize};" \
 128                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 129         "; fi\0"          \
 130
 131 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 132         "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
 133         "tftp_sf_initramfs_SWU=" \
 134             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 135                 "sf probe;" \
 136                 "sf erase swu-initramfs +${filesize};" \
 137                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 138         "; fi\0"          \
 139
 140 #define TFTP_UPDATE_BOOTLOADER \
 141         "ubootfile=u-boot.img\0" \
 142         "ubootfileSPL=SPL\0" \
 143         "tftp_sf_uboot=" \
 144             "if tftp ${loadaddr} ${ubootfile}; then " \
 145                 "sf probe;" \
 146                 "sf erase u-boot +${filesize};" \
 147                 "sf write ${loadaddr} u-boot ${filesize}" \
 148         "; fi\0"          \
 149         "tftp_sf_SPL="    \
 150             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 151                 "sf probe;" \
 152                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 153                 "sf erase 0x0 +${uboot_SPL_size};" \
 154                 "sf write ${loadaddr} 0x400 ${filesize};" \
 155         "fi\0" \
 156
 157 #define TFTP_UPDATE_SPINOR \
 158         "spinorfile=core-image-lwn-display5.spinor\0" \
 159         "spinorsize=0x2000000\0" \
 160         "tftp_sf_img=" \
 161             "if tftp ${loadaddr} ${spinorfile}; then " \
 162                 "sf probe;" \
 163                 "sf erase 0x0 ${spinorsize};" \
 164                 "sf write ${loadaddr} 0x0 ${filesize};" \
 165         "fi\0" \
 166
 167 #define CFG_EXTRA_ENV_SETTINGS    \
 168         PARTS_DEFAULT \
 169         "gpio_recovery=93\0" \
 170         "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
 171         "display=tianma-tm070-800x480\0" \
 172         "board=display5\0" \
 173         "mmcdev=0\0" \
 174         "altbootcmd=run recovery\0" \
 175         "bootdelay=1\0" \
 176         "baudrate=115200\0" \
 177         "ethact=FEC\0" \
 178         "netdev=eth0\0" \
 179         "boot_os=y\0" \
 180         "hostname=display5\0" \
 181         "loadaddr=0x12000000\0" \
 182         "fdtaddr=0x12800000\0" \
 183         "console=ttymxc4,115200 quiet cma=256M\0" \
 184         "fdtfile=imx6q-display5.dtb\0" \
 185         "fdt_high=0xffffffff\0" \
 186         "initrd_high=0xffffffff\0" \
 187         "kernel_file=fitImage\0" \
 188         "fitImg_fw_sz=0x2200\0" \
 189         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 190         "download_kernel=" \
 191                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 192         "factory_nfs=" \
 193              "setenv ipaddr 192.168.1.102;" \
 194              "setenv gatewayip 192.168.1.1;" \
 195              "setenv netmask 255.255.255.0;" \
 196              "setenv serverip 192.168.1.2;" \
 197              "echo BOOT: FACTORY (LEG);" \
 198              "run boot_nfs\0" \
 199         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 200         "recovery=" \
 201              "echo BOOT: RECOVERY: SWU;" \
 202              "run boot_swu_recovery\0" \
 203         "boot_tftp=" \
 204         "if run download_kernel; then "   \
 205              "setenv bootargs console=${console} " \
 206              "root=/dev/mmcblk0p2 rootwait;" \
 207              "bootm ${loadaddr} - ${fdtaddr};reset;" \
 208         "fi\0" \
 209         "addip=setenv bootargs ${bootargs} " \
 210         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 211             "${hostname}:eth0:on"         \
 212         "\0"      \
 213         "nfsargs=setenv bootargs " \
 214         "root=/dev/nfs rw "       \
 215         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 216         "\0" \
 217         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 218         "boot_nfs=" \
 219         "if run download_kernel; then "   \
 220              "run nfsargs;"       \
 221              "run addip;"         \
 222              "setenv bootargs ${bootargs} console=${console};"    \
 223              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 224              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 225         "fi\0" \
 226         "falcon_setup=" \
 227         "if mmc dev ${mmcdev}; then "     \
 228              SETUP_BOOTARGS \
 229              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 230              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 231              "setexpr fw_sz ${fw_sz} + 1; "  \
 232              "mmc write ${fdtargsaddr} " \
 233              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 234         "fi\0" \
 235         "boot_mmc=" \
 236         "if mmc dev ${mmcdev}; then "     \
 237              SETUP_BOOTARGS \
 238              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 239         "fi\0" \
 240         "set_kernel_part=" \
 241         "if test ${BOOT_FROM} = ACTIVE; then " \
 242              "setenv kernel_part ${kernel_part_active};" \
 243              "echo BOOT: ACTIVE;" \
 244         "else if test ${BOOT_FROM} = BACKUP; then " \
 245              "setenv kernel_part ${kernel_part_backup};" \
 246              "echo BOOT: BACKUP;" \
 247         "else " \
 248              "run recovery;" \
 249         "fi;fi\0" \
 250         "set_rootfs_part=" \
 251         "if test ${BOOT_FROM} = ACTIVE; then " \
 252              "setenv rootfs_part ${rootfs_part_active};" \
 253         "else if test ${BOOT_FROM} = BACKUP; then " \
 254              "setenv rootfs_part ${rootfs_part_backup};" \
 255         "else " \
 256              "run recovery;" \
 257         "fi;fi\0" \
 258         "BOOT_FROM=ACTIVE\0" \
 259         TFTP_UPDATE_BOOTLOADER \
 260         TFTP_UPDATE_SPINOR \
 261         "kernel_part_active=1\0" \
 262         "kernel_part_backup=3\0" \
 263         __TFTP_UPDATE_KERNEL \
 264         "rootfs_part_active=2\0" \
 265         "rootfs_part_backup=4\0" \
 266         "rootfs_file=core-image-lwn-display5.ext4\0" \
 267         "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
 268         __TFTP_UPDATE_ROOTFS \
 269         "tftp_mmc_rootfs_bkp=" \
 270            "setenv rootfs_part ${rootfs_part_backup};" \
 271            "setenv rootfs_file ${rootfs_file_backup};" \
 272            "run tftp_mmc_rootfs\0" \
 273         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 274         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 275         "\0" \
 276
 277 /* Miscellaneous configurable options */
 278
 279 /* Physical Memory Map */
 280 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 281 #define CFG_SYS_SDRAM_BASE              PHYS_SDRAM
 282
 283 #define CFG_SYS_INIT_RAM_ADDR   IRAM_BASE_ADDR
 284 #define CFG_SYS_INIT_RAM_SIZE   IRAM_SIZE
 285
 286 /* ENV config */
 287 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 288 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 289 #endif
 290
 291 #define CFG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 292 #endif /* __CONFIG_H */