include/configs/devkit8000.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2006-2008
   4  * Texas Instruments.
   5  * Richard Woodruff <r-woodruff2@ti.com>
   6  * Syed Mohammed Khasim <x0khasim@ti.com>
   7  *
   8  * (C) Copyright 2009
   9  * Frederik Kriewitz <frederik@kriewitz.eu>
  10  *
  11  * Configuration settings for the DevKit8000 board.
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 /* High Level Configuration Options */
  18 #define CONFIG_MACH_TYPE        MACH_TYPE_DEVKIT8000
  19
  20 /*
  21  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  22  * 64 bytes before this address should be set aside for u-boot.img's
  23  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  24  * other needs.
  25  */
  26
  27 #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
  28 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  29
  30 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  31 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
  32
  33 /*  Physical Memory Map  */
  34
  35 #include <configs/ti_omap3_common.h>
  36
  37 #define CONFIG_REVISION_TAG             1
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  41                                                 /* Sector */
  42 #undef CONFIG_SYS_MALLOC_LEN
  43 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  44
  45 /* Hardware drivers */
  46 /* DM9000 */
  47 #define CONFIG_NET_RETRY_COUNT          20
  48 #define CONFIG_DRIVER_DM9000            1
  49 #define CONFIG_DM9000_BASE              0x2c000000
  50 #define DM9000_IO                       CONFIG_DM9000_BASE
  51 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 0x400)
  52 #define CONFIG_DM9000_USE_16BIT         1
  53 #define CONFIG_DM9000_NO_SROM           1
  54 #undef  CONFIG_DM9000_DEBUG
  55
  56 /* TWL4030 */
  57
  58 /* Board NAND Info */
  59 #define CONFIG_JFFS2_NAND
  60 /* nand device jffs2 lives on */
  61 #define CONFIG_JFFS2_DEV                "nand0"
  62 /* start of jffs2 partition */
  63 #define CONFIG_JFFS2_PART_OFFSET        0x680000
  64 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* size of jffs2 */
  65                                                         /* partition */
  66
  67 /* BOOTP/DHCP options */
  68 #define CONFIG_BOOTP_NISDOMAIN
  69 #define CONFIG_BOOTP_BOOTFILESIZE
  70 #define CONFIG_BOOTP_DNS2
  71 #define CONFIG_BOOTP_SEND_HOSTNAME
  72 #define CONFIG_BOOTP_TIMEOFFSET
  73 #undef CONFIG_BOOTP_VENDOREX
  74
  75 /* Environment information */
  76 #define CONFIG_EXTRA_ENV_SETTINGS \
  77         "loadaddr=0x82000000\0" \
  78         "console=ttyO2,115200n8\0" \
  79         "mmcdev=0\0" \
  80         "vram=12M\0" \
  81         "dvimode=1024x768MR-16@60\0" \
  82         "defaultdisplay=dvi\0" \
  83         "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
  84         "kernelopts=rw\0" \
  85         "commonargs=" \
  86                 "setenv bootargs console=${console} " \
  87                 "vram=${vram} " \
  88                 "omapfb.mode=dvi:${dvimode} " \
  89                 "omapdss.def_disp=${defaultdisplay}\0" \
  90         "mmcargs=" \
  91                 "run commonargs; " \
  92                 "setenv bootargs ${bootargs} " \
  93                 "root=/dev/mmcblk0p2 " \
  94                 "rootwait " \
  95                 "${kernelopts}\0" \
  96         "nandargs=" \
  97                 "run commonargs; " \
  98                 "setenv bootargs ${bootargs} " \
  99                 "omapfb.mode=dvi:${dvimode} " \
 100                 "omapdss.def_disp=${defaultdisplay} " \
 101                 "root=/dev/mtdblock4 " \
 102                 "rootfstype=jffs2 " \
 103                 "${kernelopts}\0" \
 104         "netargs=" \
 105                 "run commonargs; " \
 106                 "setenv bootargs ${bootargs} " \
 107                 "root=/dev/nfs " \
 108                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 109                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
 110                 "${kernelopts} " \
 111                 "dnsip1=${dnsip} " \
 112                 "dnsip2=${dnsip2}\0" \
 113         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 114         "bootscript=echo Running bootscript from mmc ...; " \
 115                 "source ${loadaddr}\0" \
 116         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 117         "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
 118         "mmcboot=echo Booting from mmc ...; " \
 119                 "run mmcargs; " \
 120                 "bootm ${loadaddr}\0" \
 121         "nandboot=echo Booting from nand ...; " \
 122                 "run nandargs; " \
 123                 "nand read ${loadaddr} 280000 400000; " \
 124                 "bootm ${loadaddr}\0" \
 125         "netboot=echo Booting from network ...; " \
 126                 "dhcp ${loadaddr}; " \
 127                 "run netargs; " \
 128                 "bootm ${loadaddr}\0" \
 129         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 130                         "if run loadbootscript; then " \
 131                                 "run bootscript; " \
 132                         "else " \
 133                                 "if run loaduimage; then " \
 134                                         "run mmcboot; " \
 135                                 "else run nandboot; " \
 136                                 "fi; " \
 137                         "fi; " \
 138                 "else run nandboot; fi\0"
 139
 140 #define CONFIG_BOOTCOMMAND "run autoboot"
 141
 142 /* Boot Argument Buffer Size */
 143 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0 + 0x07000000)
 144 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
 145                                         0x01000000) /* 16MB */
 146
 147 /* NAND and environment organization  */
 148
 149 #define CONFIG_ENV_OFFSET               0x260000
 150
 151 /* SRAM config */
 152 #define CONFIG_SYS_SRAM_START              0x40200000
 153 #define CONFIG_SYS_SRAM_SIZE               0x10000
 154
 155 /* Defines for SPL */
 156
 157 /* NAND boot config */
 158 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 159 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 160 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 161 #define CONFIG_SYS_NAND_OOBSIZE         64
 162 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 163 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 164 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 165                                                 10, 11, 12, 13}
 166
 167 #define CONFIG_SYS_NAND_ECCSIZE         512
 168 #define CONFIG_SYS_NAND_ECCBYTES        3
 169 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 170
 171 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 172 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x200000
 173
 174 /* SPL OS boot options */
 175 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 176
 177 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
 178 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
 179 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
 180 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
 181 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x8   /* address 0x1000 */
 182 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  8     /* 4KB */
 183
 184 #undef CONFIG_SYS_SPL_ARGS_ADDR
 185 #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
 186
 187 #endif /* __CONFIG_H */