include/configs/devkit3250.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Embest/Timll DevKit3250 board configuration file
   4  *
   5  * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
   6  */
   7
   8 #ifndef __CONFIG_DEVKIT3250_H__
   9 #define __CONFIG_DEVKIT3250_H__
  10
  11 /* SoC and board defines */
  12 #include <linux/sizes.h>
  13 #include <asm/arch/cpu.h>
  14
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_DEVKIT3250
  16
  17 #if !defined(CONFIG_SPL_BUILD)
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19 #endif
  20
  21 /*
  22  * Memory configurations
  23  */
  24 #define CONFIG_SYS_MALLOC_LEN           SZ_1M
  25 #define CONFIG_SYS_SDRAM_BASE           EMC_DYCS0_BASE
  26 #define CONFIG_SYS_SDRAM_SIZE           SZ_64M
  27
  28 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + SZ_32K)
  29
  30 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + SZ_4K \
  31                                          - GENERATED_GBL_DATA_SIZE)
  32
  33 /*
  34  * DMA
  35  */
  36 #if !defined(CONFIG_SPL_BUILD)
  37 #define CONFIG_DMA_LPC32XX
  38 #endif
  39
  40 /*
  41  * GPIO
  42  */
  43 #define CONFIG_LPC32XX_GPIO
  44
  45 /*
  46  * Ethernet
  47  */
  48 #define CONFIG_RMII
  49 #define CONFIG_LPC32XX_ETH
  50 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  51
  52 /*
  53  * NOR Flash
  54  */
  55 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  56 #define CONFIG_SYS_MAX_FLASH_SECT       71
  57 #define CONFIG_SYS_FLASH_BASE           EMC_CS0_BASE
  58 #define CONFIG_SYS_FLASH_SIZE           SZ_4M
  59
  60 /*
  61  * NAND controller
  62  */
  63 #define CONFIG_SYS_NAND_BASE            SLC_NAND_BASE
  64 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  65 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
  66
  67 /*
  68  * NAND chip timings
  69  */
  70 #define CONFIG_LPC32XX_NAND_SLC_WDR_CLKS        14
  71 #define CONFIG_LPC32XX_NAND_SLC_WWIDTH          66666666
  72 #define CONFIG_LPC32XX_NAND_SLC_WHOLD           200000000
  73 #define CONFIG_LPC32XX_NAND_SLC_WSETUP          50000000
  74 #define CONFIG_LPC32XX_NAND_SLC_RDR_CLKS        14
  75 #define CONFIG_LPC32XX_NAND_SLC_RWIDTH          66666666
  76 #define CONFIG_LPC32XX_NAND_SLC_RHOLD           200000000
  77 #define CONFIG_LPC32XX_NAND_SLC_RSETUP          50000000
  78
  79 #define CONFIG_SYS_NAND_BLOCK_SIZE              0x20000
  80 #define CONFIG_SYS_NAND_PAGE_SIZE               NAND_LARGE_BLOCK_PAGE_SIZE
  81
  82 /*
  83  * USB
  84  */
  85 #define CONFIG_USB_OHCI_LPC32XX
  86 #define CONFIG_USB_ISP1301_I2C_ADDR             0x2d
  87
  88 /*
  89  * U-Boot General Configurations
  90  */
  91 #define CONFIG_SYS_CBSIZE               1024
  92 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  93
  94 /*
  95  * Pass open firmware flat tree
  96  */
  97
  98 /*
  99  * Environment
 100  */
 101
 102 #define CONFIG_BOOTCOMMAND                      \
 103         "dhcp; "                                \
 104         "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; "         \
 105         "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; "       \
 106         "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; "     \
 107         "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; "                  \
 108         "bootm ${loadaddr} - ${dtbaddr}"
 109
 110 #define CONFIG_EXTRA_ENV_SETTINGS               \
 111         "autoload=no\0"                         \
 112         "ethaddr=00:01:90:00:C0:81\0"           \
 113         "dtbaddr=0x81000000\0"                  \
 114         "nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0"  \
 115         "tftpdir=vladimir/oe/devkit3250\0"      \
 116         "userargs=oops=panic\0"
 117
 118 /*
 119  * U-Boot Commands
 120  */
 121
 122 /*
 123  * Boot Linux
 124  */
 125 #define CONFIG_CMDLINE_TAG
 126 #define CONFIG_SETUP_MEMORY_TAGS
 127
 128 #define CONFIG_BOOTFILE                 "uImage"
 129 #define CONFIG_LOADADDR                 0x80008000
 130
 131 /*
 132  * SPL specific defines
 133  */
 134 /* SPL will be executed at offset 0 */
 135
 136 /* SPL will use SRAM as stack */
 137 #define CONFIG_SPL_STACK                0x0000FFF8
 138
 139 /* Use the framework and generic lib */
 140
 141 /* SPL will use serial */
 142
 143 /* SPL loads an image from NAND */
 144 #define CONFIG_SPL_NAND_RAW_ONLY
 145
 146 #define CONFIG_SPL_NAND_SOFTECC
 147
 148 #define CONFIG_SPL_MAX_SIZE             0x20000
 149 #define CONFIG_SPL_PAD_TO               CONFIG_SPL_MAX_SIZE
 150
 151 /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
 152 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 153 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x60000
 154
 155 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 156 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 157
 158 /* See common/spl/spl.c  spl_set_header_raw_uboot() */
 159 #define CONFIG_SYS_MONITOR_LEN          CONFIG_SYS_NAND_U_BOOT_SIZE
 160
 161 /*
 162  * Include SoC specific configuration
 163  */
 164 #include <asm/arch/config.h>
 165
 166 #endif  /* __CONFIG_DEVKIT3250_H__*/