include/configs/da850evm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   4  *
   5  * Based on davinci_dvevm.h. Original Copyrights follow:
   6  *
   7  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * Board
  15  */
  16
  17 /*
  18  * SoC Configuration
  19  */
  20 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  21 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  22 #define CONFIG_SYS_OSCIN_FREQ           24000000
  23 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  24 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  25
  26 #ifdef CONFIG_MTD_NOR_FLASH
  27 #define CONFIG_SYS_DV_NOR_BOOT_CFG      (0x11)
  28 #endif
  29
  30 /*
  31  * Memory Info
  32  */
  33 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  34 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
  35 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  36 #define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
  37 #define CONFIG_SPL_BSS_MAX_SIZE 0x1080000
  38 /* memtest start addr */
  39
  40 /* memtest will be run on 16MB */
  41
  42 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  43         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  44         DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
  45         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  46         DAVINCI_SYSCFG_SUSPSRC_EMAC |           \
  47         DAVINCI_SYSCFG_SUSPSRC_I2C)
  48
  49 /*
  50  * PLL configuration
  51  */
  52
  53 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  54 #define CONFIG_SYS_DA850_PLL1_PLLM     21
  55
  56 /*
  57  * DDR2 memory configuration
  58  */
  59 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  60                                         DV_DDR_PHY_EXT_STRBEN | \
  61                                         (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  62
  63 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
  64         (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) |     \
  65         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
  66         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
  67         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
  68         (0x3 << DV_DDR_SDCR_CL_SHIFT) |         \
  69         (0x2 << DV_DDR_SDCR_IBANK_SHIFT) |      \
  70         (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
  71
  72 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
  73 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0
  74
  75 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
  76         (14 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
  77         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
  78         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
  79         (1 << DV_DDR_SDTMR1_WR_SHIFT) |         \
  80         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
  81         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
  82         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
  83         (0 << DV_DDR_SDTMR1_WTR_SHIFT))
  84
  85 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
  86         (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
  87         (0 << DV_DDR_SDTMR2_XP_SHIFT) |         \
  88         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
  89         (17 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
  90         (199 << DV_DDR_SDTMR2_XSRD_SHIFT) |     \
  91         (0 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
  92         (0 << DV_DDR_SDTMR2_CKE_SHIFT))
  93
  94 #define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000494
  95 #define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
  96
  97 /*
  98  * Serial Driver info
  99  */
 100 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 101
 102 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
 103
 104 /*
 105  * I2C Configuration
 106  */
 107 #ifndef CONFIG_SPL_BUILD
 108 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
 109 #endif
 110
 111 /*
 112  * Flash & Environment
 113  */
 114 #ifdef CONFIG_MTD_RAW_NAND
 115 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 116 #define CONFIG_SYS_NAND_PAGE_2K
 117 #define CONFIG_SYS_NAND_CS              3
 118 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 119 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 120 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 121 #undef CONFIG_SYS_NAND_HW_ECC
 122 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 123 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 124 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x40000
 125 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 126 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 127 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 128                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 129                                         CONFIG_SYS_MALLOC_LEN -       \
 130                                         GENERATED_GBL_DATA_SIZE)
 131 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 132                                 24, 25, 26, 27, 28, \
 133                                 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
 134                                 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
 135                                 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
 136                                 59, 60, 61, 62, 63 }
 137 #define CONFIG_SYS_NAND_ECCSIZE         512
 138 #define CONFIG_SYS_NAND_ECCBYTES        10
 139 #endif
 140
 141 /*
 142  * Network & Ethernet Configuration
 143  */
 144 #ifdef CONFIG_DRIVER_TI_EMAC
 145 #define CONFIG_NET_RETRY_COUNT  10
 146 #endif
 147
 148 #ifdef CONFIG_MTD_NOR_FLASH
 149 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* max number of flash banks */
 150 #define CONFIG_SYS_FLASH_SECT_SZ        (128 << 10) /* 128KB */
 151 #define CONFIG_SYS_FLASH_BASE           DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 152 #define PHYS_FLASH_SIZE                 (8 << 20) /* Flash size 8MB */
 153 #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
 154                + 3)
 155 #endif
 156
 157 /*
 158  * U-Boot general configuration
 159  */
 160 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 161 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 162 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 163
 164 /*
 165  * Linux Information
 166  */
 167 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 168 #define CONFIG_HWCONFIG         /* enable hwconfig */
 169
 170 #define DEFAULT_LINUX_BOOT_ENV \
 171         "loadaddr=0xc0700000\0" \
 172         "fdtaddr=0xc0600000\0" \
 173         "scriptaddr=0xc0600000\0"
 174
 175 #include <environment/ti/mmc.h>
 176
 177 #define CONFIG_EXTRA_ENV_SETTINGS \
 178         DEFAULT_LINUX_BOOT_ENV \
 179         DEFAULT_MMC_TI_ARGS \
 180         "bootpart=0:2\0" \
 181         "bootdir=/boot\0" \
 182         "bootfile=zImage\0" \
 183         "fdtfile=da850-evm.dtb\0" \
 184         "boot_fdt=yes\0" \
 185         "boot_fit=0\0" \
 186         "console=ttyS2,115200n8\0" \
 187         "hwconfig=dsp:wake=yes"
 188
 189 #ifdef CONFIG_CMD_BDI
 190 #define CONFIG_CLOCKS
 191 #endif
 192
 193 /* USB Configs */
 194 #define CONFIG_USB_OHCI_NEW
 195 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 196
 197 #ifndef CONFIG_MTD_NOR_FLASH
 198 #define CONFIG_SPL_PAD_TO       32768
 199 #endif
 200
 201 #ifdef CONFIG_SPL_BUILD
 202 /* defines for SPL */
 203 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 204                                                 CONFIG_SYS_MALLOC_LEN)
 205 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 206 #define CONFIG_SPL_STACK        0x8001ff00
 207 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 208
 209 #endif
 210
 211 /* Load U-Boot Image From MMC */
 212
 213 /* additions for new relocation code, must added to all boards */
 214 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 215
 216 #ifdef CONFIG_MTD_NOR_FLASH
 217 #define CONFIG_SYS_INIT_SP_ADDR         0x8001ff00
 218 #else
 219 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 220                                         GENERATED_GBL_DATA_SIZE)
 221 #endif /* CONFIG_MTD_NOR_FLASH */
 222
 223 #include <asm/arch/hardware.h>
 224
 225 #endif /* __CONFIG_H */