include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * Corenet DS style board configuration file
   8  */
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15 #ifdef CONFIG_SECURE_BOOT
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #ifdef CONFIG_NAND
  19 #define CONFIG_RAMBOOT_NAND
  20 #endif
  21 #define CONFIG_BOOTSCRIPT_COPY_RAM
  22 #else
  23 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  24 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  25 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  26 #if defined(CONFIG_TARGET_P3041DS)
  27 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  28 #elif defined(CONFIG_TARGET_P4080DS)
  29 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  30 #elif defined(CONFIG_TARGET_P5020DS)
  31 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  32 #elif defined(CONFIG_TARGET_P5040DS)
  33 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  34 #endif
  35 #endif
  36 #endif
  37
  38 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  39 /* Set 1M boot space */
  40 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  42                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  43 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  44 #endif
  45
  46 /* High Level Configuration Options */
  47 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  55 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  56 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  57 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  58 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  59
  60 #define CONFIG_ENV_OVERWRITE
  61
  62 #if defined(CONFIG_SPIFLASH)
  63 #define CONFIG_ENV_SPI_BUS              0
  64 #define CONFIG_ENV_SPI_CS               0
  65 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  66 #define CONFIG_ENV_SPI_MODE             0
  67 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  68 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  69 #define CONFIG_ENV_SECT_SIZE            0x10000
  70 #elif defined(CONFIG_SDCARD)
  71 #define CONFIG_FSL_FIXED_MMC_LOCATION
  72 #define CONFIG_SYS_MMC_ENV_DEV          0
  73 #define CONFIG_ENV_SIZE                 0x2000
  74 #define CONFIG_ENV_OFFSET               (512 * 1658)
  75 #elif defined(CONFIG_NAND)
  76 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  77 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  78 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  79 #define CONFIG_ENV_ADDR         0xffe20000
  80 #define CONFIG_ENV_SIZE         0x2000
  81 #elif defined(CONFIG_ENV_IS_NOWHERE)
  82 #define CONFIG_ENV_SIZE         0x2000
  83 #else
  84 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  85 #define CONFIG_ENV_SIZE         0x2000
  86 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  87 #endif
  88
  89 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  90
  91 /*
  92  * These can be toggled for performance analysis, otherwise use default.
  93  */
  94 #define CONFIG_SYS_CACHE_STASHING
  95 #define CONFIG_BACKSIDE_L2_CACHE
  96 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  97 #define CONFIG_BTB                      /* toggle branch predition */
  98 #define CONFIG_DDR_ECC
  99 #ifdef CONFIG_DDR_ECC
 100 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 101 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 102 #endif
 103
 104 #define CONFIG_ENABLE_36BIT_PHYS
 105
 106 #ifdef CONFIG_PHYS_64BIT
 107 #define CONFIG_ADDR_MAP
 108 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 109 #endif
 110
 111 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 112 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 113 #define CONFIG_SYS_MEMTEST_END          0x00400000
 114
 115 /*
 116  *  Config the L3 Cache as L3 SRAM
 117  */
 118 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 119 #ifdef CONFIG_PHYS_64BIT
 120 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 121 #else
 122 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 123 #endif
 124 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 125 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 126
 127 #ifdef CONFIG_PHYS_64BIT
 128 #define CONFIG_SYS_DCSRBAR              0xf0000000
 129 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 130 #endif
 131
 132 /* EEPROM */
 133 #define CONFIG_ID_EEPROM
 134 #define CONFIG_SYS_I2C_EEPROM_NXID
 135 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 136 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 137 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 138
 139 /*
 140  * DDR Setup
 141  */
 142 #define CONFIG_VERY_BIG_RAM
 143 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 144 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 145
 146 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 147 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 148
 149 #define CONFIG_DDR_SPD
 150
 151 #define CONFIG_SYS_SPD_BUS_NUM  1
 152 #define SPD_EEPROM_ADDRESS1     0x51
 153 #define SPD_EEPROM_ADDRESS2     0x52
 154 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 155 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 156
 157 /*
 158  * Local Bus Definitions
 159  */
 160
 161 /* Set the local bus clock 1/8 of platform clock */
 162 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 163
 164 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 165 #ifdef CONFIG_PHYS_64BIT
 166 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 167 #else
 168 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 169 #endif
 170
 171 #define CONFIG_SYS_FLASH_BR_PRELIM \
 172                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 173                  | BR_PS_16 | BR_V)
 174 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 175                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 176
 177 #define CONFIG_SYS_BR1_PRELIM \
 178         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 179 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 180
 181 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 182 #ifdef CONFIG_PHYS_64BIT
 183 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 184 #else
 185 #define PIXIS_BASE_PHYS         PIXIS_BASE
 186 #endif
 187
 188 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 189 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 190
 191 #define PIXIS_LBMAP_SWITCH      7
 192 #define PIXIS_LBMAP_MASK        0xf0
 193 #define PIXIS_LBMAP_SHIFT       4
 194 #define PIXIS_LBMAP_ALTBANK     0x40
 195
 196 #define CONFIG_SYS_FLASH_QUIET_TEST
 197 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 198
 199 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 200 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 201 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 202 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 203
 204 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 205
 206 #if defined(CONFIG_RAMBOOT_PBL)
 207 #define CONFIG_SYS_RAMBOOT
 208 #endif
 209
 210 /* Nand Flash */
 211 #ifdef CONFIG_NAND_FSL_ELBC
 212 #define CONFIG_SYS_NAND_BASE            0xffa00000
 213 #ifdef CONFIG_PHYS_64BIT
 214 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 215 #else
 216 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 217 #endif
 218
 219 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 220 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 221 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 222
 223 /* NAND flash config */
 224 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 225                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 226                                | BR_PS_8               /* Port Size = 8 bit */ \
 227                                | BR_MS_FCM             /* MSEL = FCM */ \
 228                                | BR_V)                 /* valid */
 229 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 230                                | OR_FCM_PGS            /* Large Page*/ \
 231                                | OR_FCM_CSCT \
 232                                | OR_FCM_CST \
 233                                | OR_FCM_CHT \
 234                                | OR_FCM_SCY_1 \
 235                                | OR_FCM_TRLX \
 236                                | OR_FCM_EHTR)
 237
 238 #ifdef CONFIG_NAND
 239 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 240 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 241 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 242 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 243 #else
 244 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 245 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 246 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 247 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 248 #endif
 249 #else
 250 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 251 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 252 #endif /* CONFIG_NAND_FSL_ELBC */
 253
 254 #define CONFIG_SYS_FLASH_EMPTY_INFO
 255 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 256 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 257
 258 #define CONFIG_HWCONFIG
 259
 260 /* define to use L1 as initial stack */
 261 #define CONFIG_L1_INIT_RAM
 262 #define CONFIG_SYS_INIT_RAM_LOCK
 263 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 264 #ifdef CONFIG_PHYS_64BIT
 265 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 266 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 267 /* The assembler doesn't like typecast */
 268 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 269         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 270           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 271 #else
 272 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 273 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 274 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 275 #endif
 276 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 277
 278 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 279 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 280
 281 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 282 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 283
 284 /* Serial Port - controlled on board with jumper J8
 285  * open - index 2
 286  * shorted - index 1
 287  */
 288 #define CONFIG_SYS_NS16550_SERIAL
 289 #define CONFIG_SYS_NS16550_REG_SIZE     1
 290 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 291
 292 #define CONFIG_SYS_BAUDRATE_TABLE       \
 293         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 294
 295 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 296 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 297 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 298 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 299
 300 /* I2C */
 301 #define CONFIG_SYS_I2C
 302 #define CONFIG_SYS_I2C_FSL
 303 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 304 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 305 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 306 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 307 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 308 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 309
 310 /*
 311  * RapidIO
 312  */
 313 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 314 #ifdef CONFIG_PHYS_64BIT
 315 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 316 #else
 317 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 318 #endif
 319 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 320
 321 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 322 #ifdef CONFIG_PHYS_64BIT
 323 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 324 #else
 325 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 326 #endif
 327 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 328
 329 /*
 330  * for slave u-boot IMAGE instored in master memory space,
 331  * PHYS must be aligned based on the SIZE
 332  */
 333 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 334 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 335 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 336 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 337 /*
 338  * for slave UCODE and ENV instored in master memory space,
 339  * PHYS must be aligned based on the SIZE
 340  */
 341 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 342 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 343 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 344
 345 /* slave core release by master*/
 346 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 347 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 348
 349 /*
 350  * SRIO_PCIE_BOOT - SLAVE
 351  */
 352 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 353 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 354 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 355                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 356 #endif
 357
 358 /*
 359  * eSPI - Enhanced SPI
 360  */
 361 #define CONFIG_SF_DEFAULT_SPEED         10000000
 362 #define CONFIG_SF_DEFAULT_MODE          0
 363
 364 /*
 365  * General PCI
 366  * Memory space is mapped 1-1, but I/O space must start from 0.
 367  */
 368
 369 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 370 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 371 #ifdef CONFIG_PHYS_64BIT
 372 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 373 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 374 #else
 375 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 376 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 377 #endif
 378 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 379 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 380 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 381 #ifdef CONFIG_PHYS_64BIT
 382 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 383 #else
 384 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 385 #endif
 386 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 387
 388 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 389 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 390 #ifdef CONFIG_PHYS_64BIT
 391 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 392 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 393 #else
 394 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 395 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 396 #endif
 397 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 398 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 399 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 400 #ifdef CONFIG_PHYS_64BIT
 401 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 402 #else
 403 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 404 #endif
 405 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 406
 407 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 408 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 409 #ifdef CONFIG_PHYS_64BIT
 410 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 411 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 412 #else
 413 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 414 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 415 #endif
 416 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 417 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 418 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 419 #ifdef CONFIG_PHYS_64BIT
 420 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 421 #else
 422 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 423 #endif
 424 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 425
 426 /* controller 4, Base address 203000 */
 427 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 428 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 429 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 430 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 431 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 432 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 433
 434 /* Qman/Bman */
 435 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 436 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 437 #ifdef CONFIG_PHYS_64BIT
 438 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 439 #else
 440 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 441 #endif
 442 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 443 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 444 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 445 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 446 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 447 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 448                                         CONFIG_SYS_BMAN_CENA_SIZE)
 449 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 450 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 451 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 452 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 453 #ifdef CONFIG_PHYS_64BIT
 454 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 455 #else
 456 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 457 #endif
 458 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 459 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 460 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 461 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 462 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 463 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 464                                         CONFIG_SYS_QMAN_CENA_SIZE)
 465 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 466 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 467
 468 #define CONFIG_SYS_DPAA_FMAN
 469 #define CONFIG_SYS_DPAA_PME
 470 /* Default address of microcode for the Linux Fman driver */
 471 #if defined(CONFIG_SPIFLASH)
 472 /*
 473  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 474  * env, so we got 0x110000.
 475  */
 476 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 477 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 478 #elif defined(CONFIG_SDCARD)
 479 /*
 480  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 481  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 482  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 483  */
 484 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 485 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 486 #elif defined(CONFIG_NAND)
 487 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 488 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 489 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 490 /*
 491  * Slave has no ucode locally, it can fetch this from remote. When implementing
 492  * in two corenet boards, slave's ucode could be stored in master's memory
 493  * space, the address can be mapped from slave TLB->slave LAW->
 494  * slave SRIO or PCIE outbound window->master inbound window->
 495  * master LAW->the ucode address in master's memory space.
 496  */
 497 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 498 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 499 #else
 500 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 501 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 502 #endif
 503 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 504 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 505
 506 #ifdef CONFIG_SYS_DPAA_FMAN
 507 #define CONFIG_FMAN_ENET
 508 #define CONFIG_PHYLIB_10G
 509 #define CONFIG_PHY_VITESSE
 510 #define CONFIG_PHY_TERANETICS
 511 #endif
 512
 513 #ifdef CONFIG_PCI
 514 #define CONFIG_PCI_INDIRECT_BRIDGE
 515
 516 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 517 #endif  /* CONFIG_PCI */
 518
 519 /* SATA */
 520 #ifdef CONFIG_FSL_SATA_V2
 521 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 522 #define CONFIG_SATA1
 523 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 524 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 525 #define CONFIG_SATA2
 526 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 527 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 528
 529 #define CONFIG_LBA48
 530 #endif
 531
 532 #ifdef CONFIG_FMAN_ENET
 533 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 534 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 535 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 536 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 537 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 538
 539 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 540 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 541 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 542 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 543 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 544
 545 #define CONFIG_SYS_TBIPA_VALUE  8
 546 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 547 #endif
 548
 549 /*
 550  * Environment
 551  */
 552 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 553 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 554
 555 /*
 556 * USB
 557 */
 558 #define CONFIG_HAS_FSL_DR_USB
 559 #define CONFIG_HAS_FSL_MPH_USB
 560
 561 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 562 #define CONFIG_USB_EHCI_FSL
 563 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 564 #endif
 565
 566 #ifdef CONFIG_MMC
 567 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 568 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 569 #endif
 570
 571 /*
 572  * Miscellaneous configurable options
 573  */
 574 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 575
 576 /*
 577  * For booting Linux, the board info and command line data
 578  * have to be in the first 64 MB of memory, since this is
 579  * the maximum mapped by the Linux kernel during initialization.
 580  */
 581 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 582 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 583
 584 #ifdef CONFIG_CMD_KGDB
 585 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 586 #endif
 587
 588 /*
 589  * Environment Configuration
 590  */
 591 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 592 #define CONFIG_BOOTFILE         "uImage"
 593 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 594
 595 /* default location for tftp and bootm */
 596 #define CONFIG_LOADADDR         1000000
 597
 598 #ifdef CONFIG_TARGET_P4080DS
 599 #define __USB_PHY_TYPE  ulpi
 600 #else
 601 #define __USB_PHY_TYPE  utmi
 602 #endif
 603
 604 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 605         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 606         "bank_intlv=cs0_cs1;"                                   \
 607         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 608         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 609         "netdev=eth0\0"                                         \
 610         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 611         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 612         "tftpflash=tftpboot $loadaddr $uboot && "               \
 613         "protect off $ubootaddr +$filesize && "                 \
 614         "erase $ubootaddr +$filesize && "                       \
 615         "cp.b $loadaddr $ubootaddr $filesize && "               \
 616         "protect on $ubootaddr +$filesize && "                  \
 617         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 618         "consoledev=ttyS0\0"                                    \
 619         "ramdiskaddr=2000000\0"                                 \
 620         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 621         "fdtaddr=1e00000\0"                                     \
 622         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 623         "bdev=sda3\0"
 624
 625 #define CONFIG_HDBOOT                                   \
 626         "setenv bootargs root=/dev/$bdev rw "           \
 627         "console=$consoledev,$baudrate $othbootargs;"   \
 628         "tftp $loadaddr $bootfile;"                     \
 629         "tftp $fdtaddr $fdtfile;"                       \
 630         "bootm $loadaddr - $fdtaddr"
 631
 632 #define CONFIG_NFSBOOTCOMMAND                   \
 633         "setenv bootargs root=/dev/nfs rw "     \
 634         "nfsroot=$serverip:$rootpath "          \
 635         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 636         "console=$consoledev,$baudrate $othbootargs;"   \
 637         "tftp $loadaddr $bootfile;"             \
 638         "tftp $fdtaddr $fdtfile;"               \
 639         "bootm $loadaddr - $fdtaddr"
 640
 641 #define CONFIG_RAMBOOTCOMMAND                           \
 642         "setenv bootargs root=/dev/ram rw "             \
 643         "console=$consoledev,$baudrate $othbootargs;"   \
 644         "tftp $ramdiskaddr $ramdiskfile;"               \
 645         "tftp $loadaddr $bootfile;"                     \
 646         "tftp $fdtaddr $fdtfile;"                       \
 647         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 648
 649 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 650
 651 #include <asm/fsl_secure_boot.h>
 652
 653 #endif  /* __CONFIG_H */