include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2010 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #include "../board/freescale/common/ics307_clk.h"
  30
  31 /* High Level Configuration Options */
  32 #define CONFIG_BOOKE
  33 #define CONFIG_E500                     /* BOOKE e500 family */
  34 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  35 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  36 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  37 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  38 #define CONFIG_MP                       /* support multiple processors */
  39
  40 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  41 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  42 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  43 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  44 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  45 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  46 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  47 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  48 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  49 #define CONFIG_SYS_HAS_SERDES           /* has SERDES */
  50
  51 #define CONFIG_SRIO1                    /* SRIO port 1 */
  52 #define CONFIG_SRIO2                    /* SRIO port 2 */
  53
  54 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  55
  56 #define CONFIG_ENV_OVERWRITE
  57
  58 #ifdef CONFIG_SYS_NO_FLASH
  59 #define CONFIG_ENV_IS_NOWHERE
  60 #else
  61 #define CONFIG_ENV_IS_IN_FLASH
  62 #define CONFIG_FLASH_CFI_DRIVER
  63 #define CONFIG_SYS_FLASH_CFI
  64 #endif
  65
  66 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  67 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  68
  69 /*
  70  * These can be toggled for performance analysis, otherwise use default.
  71  */
  72 #define CONFIG_SYS_CACHE_STASHING
  73 #define CONFIG_BACKSIDE_L2_CACHE
  74 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  75 #define CONFIG_BTB                      /* toggle branch predition */
  76 /*#define       CONFIG_DDR_ECC*/
  77 #ifdef CONFIG_DDR_ECC
  78 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  79 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  80 #endif
  81
  82 #define CONFIG_ENABLE_36BIT_PHYS
  83
  84 #ifdef CONFIG_PHYS_64BIT
  85 #define CONFIG_ADDR_MAP
  86 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  87 #endif
  88
  89 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  90 #define CONFIG_SYS_MEMTEST_END          0x00400000
  91 #define CONFIG_SYS_ALT_MEMTEST
  92 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  93
  94 /*
  95  * Base addresses -- Note these are effective addresses where the
  96  * actual resources get mapped (not physical addresses)
  97  */
  98 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xfe000000      /* CCSRBAR Default */
  99 #define CONFIG_SYS_CCSRBAR              0xfe000000      /* relocated CCSRBAR */
 100 #ifdef CONFIG_PHYS_64BIT
 101 #define CONFIG_SYS_CCSRBAR_PHYS         0xffe000000ull  /* physical addr of CCSRBAR */
 102 #else
 103 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 104 #endif
 105 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 106
 107 #ifdef CONFIG_PHYS_64BIT
 108 #define CONFIG_SYS_DCSRBAR              0xf0000000
 109 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 110 #endif
 111
 112 /* EEPROM */
 113 #define CONFIG_ID_EEPROM
 114 #define CONFIG_SYS_I2C_EEPROM_NXID
 115 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 116 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 117 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 118
 119 /*
 120  * DDR Setup
 121  */
 122 #define CONFIG_VERY_BIG_RAM
 123 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 124 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 125
 126 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 127 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 128
 129 #define CONFIG_DDR_SPD
 130 #define CONFIG_FSL_DDR3
 131
 132 #ifdef CONFIG_DDR_SPD
 133 #define CONFIG_SYS_SPD_BUS_NUM  1
 134 #define SPD_EEPROM_ADDRESS1     0x51
 135 #define SPD_EEPROM_ADDRESS2     0x52
 136 #else
 137 #define CONFIG_SYS_SDRAM_SIZE           4096
 138
 139 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 140 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 141 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 142 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 143 #define CONFIG_SYS_DDR_TIMING_3         0x01031000
 144 #define CONFIG_SYS_DDR_TIMING_0         0x55440804
 145 #define CONFIG_SYS_DDR_TIMING_1         0x74713a66
 146 #define CONFIG_SYS_DDR_TIMING_2         0x0fb8911b
 147 #define CONFIG_SYS_DDR_MODE_1           0x00421850
 148 #define CONFIG_SYS_DDR_MODE_2           0x00100000
 149 #define CONFIG_SYS_DDR_MODE_CTRL        0x00000000
 150 #define CONFIG_SYS_DDR_INTERVAL         0x10400100
 151 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 152 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 153 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 154 #define CONFIG_SYS_DDR_TIMING_5         0x03401500
 155 #define CONFIG_SYS_DDR_ZQ_CNTL          0x89080600
 156 #define CONFIG_SYS_DDR_WRLVL_CNTL       0x8655a608
 157 #define CONFIG_SYS_DDR_CONTROL          0xc7048000
 158 #define CONFIG_SYS_DDR_CONTROL2         0x24400011
 159 #define CONFIG_SYS_DDR_CDR1             0x00000000
 160 #define CONFIG_SYS_DDR_CDR2             0x00000000
 161 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 162 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 163 #define CONFIG_SYS_DDR_SBE              0x00010000
 164 #define CONFIG_SYS_DDR_DEBUG_18         0x40100400
 165
 166 #define CONFIG_SYS_DDR2_CS0_BNDS        0x008000bf
 167 #define CONFIG_SYS_DDR2_CS1_BNDS        0x00C000ff
 168 #define CONFIG_SYS_DDR2_CS0_CONFIG      CONFIG_SYS_DDR_CS0_CONFIG
 169 #define CONFIG_SYS_DDR2_CS1_CONFIG      CONFIG_SYS_DDR_CS1_CONFIG
 170 #define CONFIG_SYS_DDR2_TIMING_3        CONFIG_SYS_DDR_TIMING_3
 171 #define CONFIG_SYS_DDR2_TIMING_0        CONFIG_SYS_DDR_TIMING_0
 172 #define CONFIG_SYS_DDR2_TIMING_1        CONFIG_SYS_DDR_TIMING_1
 173 #define CONFIG_SYS_DDR2_TIMING_2        CONFIG_SYS_DDR_TIMING_2
 174 #define CONFIG_SYS_DDR2_MODE_1          CONFIG_SYS_DDR_MODE_1
 175 #define CONFIG_SYS_DDR2_MODE_2          CONFIG_SYS_DDR_MODE_2
 176 #define CONFIG_SYS_DDR2_MODE_CTRL       CONFIG_SYS_DDR_MODE_CTRL
 177 #define CONFIG_SYS_DDR2_INTERVAL        CONFIG_SYS_DDR_INTERVAL
 178 #define CONFIG_SYS_DDR2_DATA_INIT       CONFIG_SYS_DDR_DATA_INIT
 179 #define CONFIG_SYS_DDR2_CLK_CTRL        CONFIG_SYS_DDR_CLK_CTRL
 180 #define CONFIG_SYS_DDR2_TIMING_4        CONFIG_SYS_DDR_TIMING_4
 181 #define CONFIG_SYS_DDR2_TIMING_5        CONFIG_SYS_DDR_TIMING_5
 182 #define CONFIG_SYS_DDR2_ZQ_CNTL         CONFIG_SYS_DDR_ZQ_CNTL
 183 #define CONFIG_SYS_DDR2_WRLVL_CNTL      CONFIG_SYS_DDR_WRLVL_CNTL
 184 #define CONFIG_SYS_DDR2_CONTROL         CONFIG_SYS_DDR_CONTROL
 185 #define CONFIG_SYS_DDR2_CONTROL2        CONFIG_SYS_DDR_CONTROL2
 186 #define CONFIG_SYS_DDR2_CDR1            CONFIG_SYS_DDR_CDR1
 187 #define CONFIG_SYS_DDR2_CDR2            CONFIG_SYS_DDR_CDR2
 188 #define CONFIG_SYS_DDR2_ERR_INT_EN      CONFIG_SYS_DDR_ERR_INT_EN
 189 #define CONFIG_SYS_DDR2_ERR_DIS         CONFIG_SYS_DDR_ERR_DIS
 190 #define CONFIG_SYS_DDR2_SBE             CONFIG_SYS_DDR_SBE
 191 #define CONFIG_SYS_DDR2_DEBUG_18        CONFIG_SYS_DDR_DEBUG_18
 192
 193 #endif
 194
 195 /*
 196  * Local Bus Definitions
 197  */
 198
 199 /* Set the local bus clock 1/8 of platform clock */
 200 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 201
 202 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 203 #ifdef CONFIG_PHYS_64BIT
 204 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 205 #else
 206 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 207 #endif
 208
 209 #define CONFIG_SYS_BR0_PRELIM \
 210         (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 211          BR_PS_16 | BR_V)
 212 #define CONFIG_SYS_OR0_PRELIM   ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 213                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 214
 215 #define CONFIG_SYS_BR1_PRELIM \
 216         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 217 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 218
 219 #define CONFIG_FSL_NGPIXIS              /* use common ngPIXIS code */
 220 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 221 #ifdef CONFIG_PHYS_64BIT
 222 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 223 #else
 224 #define PIXIS_BASE_PHYS         PIXIS_BASE
 225 #endif
 226
 227 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 228 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 229
 230 #define PIXIS_LBMAP_SWITCH      7
 231 #define PIXIS_LBMAP_MASK        0xf0
 232 #define PIXIS_LBMAP_SHIFT       4
 233 #define PIXIS_LBMAP_ALTBANK     0x40
 234
 235 #define CONFIG_SYS_FLASH_QUIET_TEST
 236 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 237
 238 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 239 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 240 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 241 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 242
 243 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 244
 245 #define CONFIG_SYS_FLASH_EMPTY_INFO
 246 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 247 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 248
 249 #define CONFIG_BOARD_EARLY_INIT_F
 250 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 251 #define CONFIG_MISC_INIT_R
 252
 253 #define CONFIG_HWCONFIG
 254
 255 /* define to use L1 as initial stack */
 256 #define CONFIG_L1_INIT_RAM
 257 #define CONFIG_SYS_INIT_RAM_LOCK
 258 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 259 #ifdef CONFIG_PHYS_64BIT
 260 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 261 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 262 /* The assembler doesn't like typecast */
 263 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 264         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 265           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 266 #else
 267 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 268 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 269 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 270 #endif
 271 #define CONFIG_SYS_INIT_RAM_END         0x00004000      /* End of used area in RAM */
 272
 273 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* num bytes initial data */
 274 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 275 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 276
 277 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 278 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 279
 280 /* Serial Port - controlled on board with jumper J8
 281  * open - index 2
 282  * shorted - index 1
 283  */
 284 #define CONFIG_CONS_INDEX       1
 285 #define CONFIG_SYS_NS16550
 286 #define CONFIG_SYS_NS16550_SERIAL
 287 #define CONFIG_SYS_NS16550_REG_SIZE     1
 288 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 289
 290 #define CONFIG_SYS_BAUDRATE_TABLE       \
 291         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 292
 293 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 294 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 295 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 296 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 297
 298 /* Use the HUSH parser */
 299 #define CONFIG_SYS_HUSH_PARSER
 300 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 301
 302 /* pass open firmware flat tree */
 303 #define CONFIG_OF_LIBFDT
 304 #define CONFIG_OF_BOARD_SETUP
 305 #define CONFIG_OF_STDOUT_VIA_ALIAS
 306
 307 /* new uImage format support */
 308 #define CONFIG_FIT
 309 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 310
 311 /* I2C */
 312 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 313 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 314 #define CONFIG_I2C_MULTI_BUS
 315 #define CONFIG_I2C_CMD_TREE
 316 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 317 #define CONFIG_SYS_I2C_SLAVE            0x7F
 318 #define CONFIG_SYS_I2C_OFFSET           0x118000
 319 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 320
 321 /*
 322  * RapidIO
 323  */
 324 #define CONFIG_SYS_RIO1_MEM_VIRT        0xa0000000
 325 #ifdef CONFIG_PHYS_64BIT
 326 #define CONFIG_SYS_RIO1_MEM_PHYS        0xc20000000ull
 327 #else
 328 #define CONFIG_SYS_RIO1_MEM_PHYS        0xa0000000
 329 #endif
 330 #define CONFIG_SYS_RIO1_MEM_SIZE        0x10000000      /* 256M */
 331
 332 #define CONFIG_SYS_RIO2_MEM_VIRT        0xb0000000
 333 #ifdef CONFIG_PHYS_64BIT
 334 #define CONFIG_SYS_RIO2_MEM_PHYS        0xc30000000ull
 335 #else
 336 #define CONFIG_SYS_RIO2_MEM_PHYS        0xb0000000
 337 #endif
 338 #define CONFIG_SYS_RIO2_MEM_SIZE        0x10000000      /* 256M */
 339
 340 /*
 341  * General PCI
 342  * Memory space is mapped 1-1, but I/O space must start from 0.
 343  */
 344
 345 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 346 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 347 #ifdef CONFIG_PHYS_64BIT
 348 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 349 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 350 #else
 351 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 352 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 353 #endif
 354 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 355 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 356 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 357 #ifdef CONFIG_PHYS_64BIT
 358 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 359 #else
 360 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 361 #endif
 362 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 363
 364 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 365 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 366 #ifdef CONFIG_PHYS_64BIT
 367 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 368 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 369 #else
 370 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 371 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 372 #endif
 373 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 374 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 375 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 376 #ifdef CONFIG_PHYS_64BIT
 377 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 378 #else
 379 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 380 #endif
 381 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 382
 383 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 384 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xe0000000
 385 #ifdef CONFIG_PHYS_64BIT
 386 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 387 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 388 #else
 389 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 390 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 391 #endif
 392 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 393 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 394 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 395 #ifdef CONFIG_PHYS_64BIT
 396 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 397 #else
 398 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 399 #endif
 400 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 401
 402 /* controller 4, Base address 203000 */
 403 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 404 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 405 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 406 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 407 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 408 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 409
 410 /* Qman/Bman */
 411 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 412 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 415 #else
 416 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 417 #endif
 418 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 419 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 420 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 421 #ifdef CONFIG_PHYS_64BIT
 422 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 423 #else
 424 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 425 #endif
 426 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 427
 428 #define CONFIG_SYS_DPAA_FMAN
 429 #define CONFIG_SYS_DPAA_PME
 430 /* Default address of microcode for the Linux Fman driver */
 431 #define CONFIG_SYS_FMAN_FW_ADDR         0xEF000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS    0xFEF000000ULL
 434 #else
 435 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS    CONFIG_SYS_FMAN_FW_ADDR
 436 #endif
 437
 438 #ifdef CONFIG_SYS_DPAA_FMAN
 439 #define CONFIG_FMAN_ENET
 440 #endif
 441
 442 #ifdef CONFIG_PCI
 443
 444 /*PCIE video card used*/
 445 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 446
 447 /* video */
 448 #define CONFIG_VIDEO
 449
 450 #ifdef CONFIG_VIDEO
 451 #define CONFIG_BIOSEMU
 452 #define CONFIG_CFB_CONSOLE
 453 #define CONFIG_VIDEO_SW_CURSOR
 454 #define CONFIG_VGA_AS_SINGLE_DEVICE
 455 #define CONFIG_ATI_RADEON_FB
 456 #define CONFIG_VIDEO_LOGO
 457 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 458 #endif
 459
 460 #define CONFIG_NET_MULTI
 461 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 462 #define CONFIG_E1000
 463
 464 #ifndef CONFIG_PCI_PNP
 465 #define PCI_ENET0_IOADDR                CONFIG_SYS_PCI1_IO_BUS
 466 #define PCI_ENET0_MEMADDR               CONFIG_SYS_PCI1_IO_BUS
 467 #define PCI_IDSEL_NUMBER                0x11    /* IDSEL = AD11 */
 468 #endif
 469
 470 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 471 #define CONFIG_DOS_PARTITION
 472 #endif  /* CONFIG_PCI */
 473
 474 /* SATA */
 475 #ifdef CONFIG_FSL_SATA_V2
 476 #define CONFIG_LIBATA
 477 #define CONFIG_FSL_SATA
 478
 479 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 480 #define CONFIG_SATA1
 481 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 482 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 483 #define CONFIG_SATA2
 484 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 485 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 486
 487 #define CONFIG_LBA48
 488 #define CONFIG_CMD_SATA
 489 #define CONFIG_DOS_PARTITION
 490 #define CONFIG_CMD_EXT2
 491 #endif
 492
 493 #ifdef CONFIG_FMAN_ENET
 494 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 495 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 496 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 497 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 498 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 499
 500 #if (CONFIG_SYS_NUM_FMAN == 2)
 501 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 502 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 503 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 504 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 505 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 506 #endif
 507
 508 #define CONFIG_SYS_TBIPA_VALUE  8
 509 #define CONFIG_MII              /* MII PHY management */
 510 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 511 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 512 #endif
 513
 514 /*
 515  * Environment
 516  */
 517 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 518 #define CONFIG_ENV_SIZE         0x2000
 519 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 520
 521 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 522 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 523
 524 /*
 525  * Command line configuration.
 526  */
 527 #include <config_cmd_default.h>
 528
 529 #define CONFIG_CMD_ELF
 530 #define CONFIG_CMD_ERRATA
 531 #define CONFIG_CMD_IRQ
 532 #define CONFIG_CMD_I2C
 533 #define CONFIG_CMD_MII
 534 #define CONFIG_CMD_PING
 535 #define CONFIG_CMD_SETEXPR
 536
 537 #ifdef CONFIG_PCI
 538 #define CONFIG_CMD_PCI
 539 #define CONFIG_CMD_NET
 540 #endif
 541
 542 /*
 543 * USB
 544 */
 545 #define CONFIG_CMD_USB
 546 #define CONFIG_USB_STORAGE
 547 #define CONFIG_USB_EHCI
 548 #define CONFIG_USB_EHCI_FSL
 549 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 550 #define CONFIG_CMD_EXT2
 551
 552 #define CONFIG_MMC
 553
 554 #ifdef CONFIG_MMC
 555 #define CONFIG_FSL_ESDHC
 556 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 557 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 558 #define CONFIG_CMD_MMC
 559 #define CONFIG_GENERIC_MMC
 560 #define CONFIG_CMD_EXT2
 561 #define CONFIG_CMD_FAT
 562 #define CONFIG_DOS_PARTITION
 563 #endif
 564
 565 /*
 566  * Miscellaneous configurable options
 567  */
 568 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 569 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 570 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 571 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 572 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 573 #ifdef CONFIG_CMD_KGDB
 574 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 575 #else
 576 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 577 #endif
 578 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 579 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 580 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 581 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 582
 583 /*
 584  * For booting Linux, the board info and command line data
 585  * have to be in the first 16 MB of memory, since this is
 586  * the maximum mapped by the Linux kernel during initialization.
 587  */
 588 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 589
 590 /*
 591  * Internal Definitions
 592  *
 593  * Boot Flags
 594  */
 595 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 596 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 597
 598 #ifdef CONFIG_CMD_KGDB
 599 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 600 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 601 #endif
 602
 603 /*
 604  * Environment Configuration
 605  */
 606 #define CONFIG_ROOTPATH         /opt/nfsroot
 607 #define CONFIG_BOOTFILE         uImage
 608 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 609
 610 /* default location for tftp and bootm */
 611 #define CONFIG_LOADADDR         1000000
 612
 613 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 614
 615 #define CONFIG_BAUDRATE 115200
 616
 617 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 618         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 619         "bank_intlv=cs0_cs1\0"                                  \
 620         "netdev=eth0\0"                                         \
 621         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
 622         "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"                  \
 623         "tftpflash=tftpboot $loadaddr $uboot && "               \
 624         "protect off $ubootaddr +$filesize && "                 \
 625         "erase $ubootaddr +$filesize && "                       \
 626         "cp.b $loadaddr $ubootaddr $filesize && "               \
 627         "protect on $ubootaddr +$filesize && "                  \
 628         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 629         "consoledev=ttyS0\0"                                    \
 630         "ramdiskaddr=2000000\0"                                 \
 631         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 632         "fdtaddr=c00000\0"                                      \
 633         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 634         "bdev=sda3\0"                                           \
 635         "c=ffe\0"                                               \
 636         "fman_ucode="MK_STR(CONFIG_SYS_FMAN_FW_ADDR_PHYS)"\0"
 637
 638 #define CONFIG_HDBOOT                                   \
 639         "setenv bootargs root=/dev/$bdev rw "           \
 640         "console=$consoledev,$baudrate $othbootargs;"   \
 641         "tftp $loadaddr $bootfile;"                     \
 642         "tftp $fdtaddr $fdtfile;"                       \
 643         "bootm $loadaddr - $fdtaddr"
 644
 645 #define CONFIG_NFSBOOTCOMMAND                   \
 646         "setenv bootargs root=/dev/nfs rw "     \
 647         "nfsroot=$serverip:$rootpath "          \
 648         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 649         "console=$consoledev,$baudrate $othbootargs;"   \
 650         "tftp $loadaddr $bootfile;"             \
 651         "tftp $fdtaddr $fdtfile;"               \
 652         "bootm $loadaddr - $fdtaddr"
 653
 654 #define CONFIG_RAMBOOTCOMMAND                           \
 655         "setenv bootargs root=/dev/ram rw "             \
 656         "console=$consoledev,$baudrate $othbootargs;"   \
 657         "tftp $ramdiskaddr $ramdiskfile;"               \
 658         "tftp $loadaddr $bootfile;"                     \
 659         "tftp $fdtaddr $fdtfile;"                       \
 660         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 661
 662 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 663
 664 #endif  /* __CONFIG_H */