include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  19 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  20 #endif
  21
  22 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  23 /* Set 1M boot space */
  24 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  25 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  26                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  27 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  28 #endif
  29
  30 /* High Level Configuration Options */
  31 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  32
  33 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  35 #endif
  36
  37 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  38 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  39
  40 /*
  41  * These can be toggled for performance analysis, otherwise use default.
  42  */
  43 #define CONFIG_SYS_CACHE_STASHING
  44 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  45 #ifdef CONFIG_DDR_ECC
  46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  47 #endif
  48
  49 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  50
  51 /*
  52  *  Config the L3 Cache as L3 SRAM
  53  */
  54 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  55 #ifdef CONFIG_PHYS_64BIT
  56 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  57 #else
  58 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  59 #endif
  60 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  61 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  62
  63 #ifdef CONFIG_PHYS_64BIT
  64 #define CONFIG_SYS_DCSRBAR              0xf0000000
  65 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  66 #endif
  67
  68 /* EEPROM */
  69 #define CONFIG_SYS_I2C_EEPROM_NXID
  70 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  71
  72 /*
  73  * DDR Setup
  74  */
  75 #define CONFIG_VERY_BIG_RAM
  76 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  77 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  78
  79 #define SPD_EEPROM_ADDRESS1     0x51
  80 #define SPD_EEPROM_ADDRESS2     0x52
  81 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
  82 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
  83
  84 /*
  85  * Local Bus Definitions
  86  */
  87
  88 /* Set the local bus clock 1/8 of platform clock */
  89 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
  90
  91 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
  92 #ifdef CONFIG_PHYS_64BIT
  93 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
  94 #else
  95 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
  96 #endif
  97
  98 #define CONFIG_SYS_FLASH_BR_PRELIM \
  99                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 100                  | BR_PS_16 | BR_V)
 101 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 102                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 103
 104 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 105 #ifdef CONFIG_PHYS_64BIT
 106 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 107 #else
 108 #define PIXIS_BASE_PHYS         PIXIS_BASE
 109 #endif
 110
 111 #define PIXIS_LBMAP_SWITCH      7
 112 #define PIXIS_LBMAP_MASK        0xf0
 113 #define PIXIS_LBMAP_SHIFT       4
 114 #define PIXIS_LBMAP_ALTBANK     0x40
 115
 116 #define CONFIG_SYS_FLASH_QUIET_TEST
 117 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 118
 119 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 120 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 121 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 122
 123 #if defined(CONFIG_RAMBOOT_PBL)
 124 #define CONFIG_SYS_RAMBOOT
 125 #endif
 126
 127 /* Nand Flash */
 128 #ifdef CONFIG_NAND_FSL_ELBC
 129 #define CONFIG_SYS_NAND_BASE            0xffa00000
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 132 #else
 133 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 134 #endif
 135
 136 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 137 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 138
 139 /* NAND flash config */
 140 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 141                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 142                                | BR_PS_8               /* Port Size = 8 bit */ \
 143                                | BR_MS_FCM             /* MSEL = FCM */ \
 144                                | BR_V)                 /* valid */
 145 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 146                                | OR_FCM_PGS            /* Large Page*/ \
 147                                | OR_FCM_CSCT \
 148                                | OR_FCM_CST \
 149                                | OR_FCM_CHT \
 150                                | OR_FCM_SCY_1 \
 151                                | OR_FCM_TRLX \
 152                                | OR_FCM_EHTR)
 153 #endif /* CONFIG_NAND_FSL_ELBC */
 154
 155 #define CONFIG_SYS_FLASH_EMPTY_INFO
 156 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 157
 158 #define CONFIG_HWCONFIG
 159
 160 /* define to use L1 as initial stack */
 161 #define CONFIG_L1_INIT_RAM
 162 #define CONFIG_SYS_INIT_RAM_LOCK
 163 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 164 #ifdef CONFIG_PHYS_64BIT
 165 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 166 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 167 /* The assembler doesn't like typecast */
 168 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 169         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 170           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 171 #else
 172 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 173 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 174 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 175 #endif
 176 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 177
 178 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179
 180 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 181
 182 /* Serial Port - controlled on board with jumper J8
 183  * open - index 2
 184  * shorted - index 1
 185  */
 186 #define CONFIG_SYS_NS16550_SERIAL
 187 #define CONFIG_SYS_NS16550_REG_SIZE     1
 188 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 189
 190 #define CONFIG_SYS_BAUDRATE_TABLE       \
 191         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 192
 193 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 194 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 195 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 196 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 197
 198 /* I2C */
 199
 200 /*
 201  * RapidIO
 202  */
 203 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 204 #ifdef CONFIG_PHYS_64BIT
 205 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 206 #else
 207 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 208 #endif
 209 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 210
 211 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 214 #else
 215 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 216 #endif
 217 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 218
 219 /*
 220  * for slave u-boot IMAGE instored in master memory space,
 221  * PHYS must be aligned based on the SIZE
 222  */
 223 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 224 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 225 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 226 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 227 /*
 228  * for slave UCODE and ENV instored in master memory space,
 229  * PHYS must be aligned based on the SIZE
 230  */
 231 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 232 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 233 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 234
 235 /* slave core release by master*/
 236 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 237 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 238
 239 /*
 240  * SRIO_PCIE_BOOT - SLAVE
 241  */
 242 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 243 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 244 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 245                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 246 #endif
 247
 248 /*
 249  * eSPI - Enhanced SPI
 250  */
 251
 252 /*
 253  * General PCI
 254  * Memory space is mapped 1-1, but I/O space must start from 0.
 255  */
 256
 257 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 258 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 259 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 260 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 261 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 262
 263 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 264 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 265 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 266 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 267 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 268
 269 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 270 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 271 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 272 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 273 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 274
 275 /* controller 4, Base address 203000 */
 276 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 277 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 278
 279 /* Qman/Bman */
 280 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 281 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 282 #ifdef CONFIG_PHYS_64BIT
 283 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 284 #else
 285 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 286 #endif
 287 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 288 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 289 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 290 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 291 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 292 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 293                                         CONFIG_SYS_BMAN_CENA_SIZE)
 294 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 295 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 296 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 297 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 298 #ifdef CONFIG_PHYS_64BIT
 299 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 300 #else
 301 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 302 #endif
 303 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 304 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 305 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 306 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 307 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 308 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 309                                         CONFIG_SYS_QMAN_CENA_SIZE)
 310 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 311 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 312
 313 #define CONFIG_SYS_DPAA_FMAN
 314 #define CONFIG_SYS_DPAA_PME
 315 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 316
 317 #ifdef CONFIG_PCI
 318 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 319 #endif  /* CONFIG_PCI */
 320
 321 #ifdef CONFIG_FMAN_ENET
 322 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 323 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 324 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 325 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 326 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 327
 328 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 329 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 330 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 331 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 332 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 333
 334 #define CONFIG_SYS_TBIPA_VALUE  8
 335 #endif
 336
 337 /*
 338  * Environment
 339  */
 340 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 341 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 342
 343 #ifdef CONFIG_MMC
 344 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 345 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 346 #endif
 347
 348 /*
 349  * Miscellaneous configurable options
 350  */
 351
 352 /*
 353  * For booting Linux, the board info and command line data
 354  * have to be in the first 64 MB of memory, since this is
 355  * the maximum mapped by the Linux kernel during initialization.
 356  */
 357 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 358 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 359
 360 /*
 361  * Environment Configuration
 362  */
 363 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 364 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 365
 366 #ifdef CONFIG_TARGET_P4080DS
 367 #define __USB_PHY_TYPE  ulpi
 368 #else
 369 #define __USB_PHY_TYPE  utmi
 370 #endif
 371
 372 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 373         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 374         "bank_intlv=cs0_cs1;"                                   \
 375         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 376         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 377         "netdev=eth0\0"                                         \
 378         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 379         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 380         "tftpflash=tftpboot $loadaddr $uboot && "               \
 381         "protect off $ubootaddr +$filesize && "                 \
 382         "erase $ubootaddr +$filesize && "                       \
 383         "cp.b $loadaddr $ubootaddr $filesize && "               \
 384         "protect on $ubootaddr +$filesize && "                  \
 385         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 386         "consoledev=ttyS0\0"                                    \
 387         "ramdiskaddr=2000000\0"                                 \
 388         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 389         "fdtaddr=1e00000\0"                                     \
 390         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 391         "bdev=sda3\0"
 392
 393 #include <asm/fsl_secure_boot.h>
 394
 395 #endif  /* __CONFIG_H */