include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  16
  17 /*
  18  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  19  * for DDR ECC byte filling in the SPL before loading the main
  20  * U-Boot into it.
  21  */
  22
  23 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  24
  25 #define CONFIG_LOADADDR                 1000000
  26
  27 /*
  28  * SDIO/MMC Card Configuration
  29  */
  30 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  31
  32 /*
  33  * SATA/SCSI/AHCI configuration
  34  */
  35 #define CONFIG_SCSI_AHCI_PLAT
  36 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  37 #define CONFIG_SYS_SCSI_MAX_LUN         1
  38 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  39                                          CONFIG_SYS_SCSI_MAX_LUN)
  40
  41 /* USB/EHCI configuration */
  42 #define CONFIG_EHCI_IS_TDI
  43
  44 /* Environment in SPI NOR flash */
  45
  46 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  47
  48 /* PCIe support */
  49 #ifndef CONFIG_SPL_BUILD
  50 #define CONFIG_PCI_SCAN_SHOW
  51 #endif
  52
  53 /*
  54  * Software (bit-bang) MII driver configuration
  55  */
  56 #define CONFIG_BITBANGMII_MULTI
  57
  58 /* SPL */
  59 /*
  60  * Select the boot device here
  61  *
  62  * Currently supported are:
  63  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  64  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  65  */
  66 #define SPL_BOOT_SPI_NOR_FLASH          1
  67 #define SPL_BOOT_SDIO_MMC_CARD          2
  68 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  69
  70 /* Defines for SPL */
  71 #define CONFIG_SPL_SIZE                 (160 << 10)
  72
  73 #if defined(CONFIG_SECURED_MODE_IMAGE)
  74 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  75 #else
  76 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  77 #endif
  78
  79 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
  80 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  81
  82 #ifdef CONFIG_SPL_BUILD
  83 #define CONFIG_SYS_MALLOC_SIMPLE
  84 #endif
  85
  86 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
  87 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  88
  89 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  90 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  91 #define CONFIG_SPL_I2C_SUPPORT
  92
  93 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
  94 /* SPL related SPI defines */
  95 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
  96 #endif
  97
  98 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
  99 /* SPL related MMC defines */
 100 #define CONFIG_SPL_MMC_SUPPORT
 101 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 102 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 103 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 104 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 105 #ifdef CONFIG_SPL_BUILD
 106 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 107 #endif
 108 #endif
 109
 110 /*
 111  * Environment Configuration
 112  */
 113
 114 #define CONFIG_HOSTNAME         "ccdc"
 115 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 116 #define CONFIG_BOOTFILE         "ccdc.img"
 117
 118 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 119         "netdev=eth1\0"                                         \
 120         "consoledev=ttyS1\0"                                                    \
 121         "u-boot=u-boot.bin\0"                                                   \
 122         "bootfile_addr=1000000\0"                                               \
 123         "keyprogram_addr=3000000\0"                                             \
 124         "keyprogram_file=keyprogram.img\0"                                              \
 125         "fdtfile=controlcenterdc.dtb\0"                                         \
 126         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 127         "mmcdev=0:2\0"                                                          \
 128         "update=sf probe 1:0;"                                                  \
 129                 " sf erase 0 +${filesize};"                                     \
 130                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 131         "upd=run load update\0"                                                 \
 132         "fdt_high=0x10000000\0"                                                 \
 133         "initrd_high=0x10000000\0"                                              \
 134         "loadkeyprogram=tpm flush_keys;"                                        \
 135                 " mmc rescan;"                                                  \
 136                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 137                 " source ${keyprogram_addr}:script@1\0"                         \
 138         "gpio1=gpio@22_25\0"                                                    \
 139         "gpio2=A29\0"                                                           \
 140         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 141                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 142         "bootfail=for i in ${blinkseq}; do"                                     \
 143                 " if test $i -eq 0; then"                                       \
 144                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 145                 " elif test $i -eq 1; then"                                     \
 146                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 147                 " elif test $i -eq 2; then"                                     \
 148                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 149                 " else;"                                                        \
 150                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 151                 " fi; sleep 0.12; done\0"
 152
 153 #define CONFIG_NFSBOOTCOMMAND                                                           \
 154         "setenv bootargs root=/dev/nfs rw "                                             \
 155         "nfsroot=${serverip}:${rootpath} "                                              \
 156         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 157         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 158         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 159         "bootm ${bootfile_addr}"
 160
 161 #define CONFIG_MMCBOOTCOMMAND                                   \
 162         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 163         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 164         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 165         "bootm ${bootfile_addr}"
 166
 167 #define CONFIG_BOOTCOMMAND                      \
 168         "if env exists keyprogram; then;"       \
 169         " setenv keyprogram; run nfsboot;"      \
 170         " fi;"                                  \
 171         " run dobootfail"
 172
 173 /*
 174  * mv-common.h should be defined after CMD configs since it used them
 175  * to enable certain macros
 176  */
 177 #include "mv-common.h"
 178
 179 #endif /* _CONFIG_CONTROLCENTERDC_H */