include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  16 #define CONFIG_BOARD_LATE_INIT
  17
  18 /*
  19  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  20  * for DDR ECC byte filling in the SPL before loading the main
  21  * U-Boot into it.
  22  */
  23
  24 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  25
  26 #define CONFIG_LOADADDR                 1000000
  27
  28 /*
  29  * SDIO/MMC Card Configuration
  30  */
  31 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  32
  33 /*
  34  * SATA/SCSI/AHCI configuration
  35  */
  36 #define CONFIG_SCSI_AHCI_PLAT
  37 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  38 #define CONFIG_SYS_SCSI_MAX_LUN         1
  39 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  40                                          CONFIG_SYS_SCSI_MAX_LUN)
  41
  42 /* USB/EHCI configuration */
  43 #define CONFIG_EHCI_IS_TDI
  44
  45 /* Environment in SPI NOR flash */
  46 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  47 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  48 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  49
  50 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  51
  52 /* PCIe support */
  53 #ifndef CONFIG_SPL_BUILD
  54 #define CONFIG_PCI_SCAN_SHOW
  55 #endif
  56
  57 /*
  58  * Software (bit-bang) MII driver configuration
  59  */
  60 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  61 #define CONFIG_BITBANGMII_MULTI
  62
  63 /* SPL */
  64 /*
  65  * Select the boot device here
  66  *
  67  * Currently supported are:
  68  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  69  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  70  */
  71 #define SPL_BOOT_SPI_NOR_FLASH          1
  72 #define SPL_BOOT_SDIO_MMC_CARD          2
  73 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  74
  75 /* Defines for SPL */
  76 #define CONFIG_SPL_SIZE                 (160 << 10)
  77
  78 #if defined(CONFIG_SECURED_MODE_IMAGE)
  79 #define CONFIG_SPL_TEXT_BASE            0x40002614
  80 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  81 #else
  82 #define CONFIG_SPL_TEXT_BASE            0x40000030
  83 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  84 #endif
  85
  86 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
  87 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  88
  89 #ifdef CONFIG_SPL_BUILD
  90 #define CONFIG_SYS_MALLOC_SIMPLE
  91 #endif
  92
  93 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
  94 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  95
  96 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  97 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  98 #define CONFIG_SPL_I2C_SUPPORT
  99
 100 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 101 /* SPL related SPI defines */
 102 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
 103 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 104 #endif
 105
 106 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 107 /* SPL related MMC defines */
 108 #define CONFIG_SPL_MMC_SUPPORT
 109 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 110 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 111 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 112 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 113 #ifdef CONFIG_SPL_BUILD
 114 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 115 #endif
 116 #endif
 117
 118 /*
 119  * Environment Configuration
 120  */
 121 #define CONFIG_ENV_OVERWRITE
 122
 123 #define CONFIG_BAUDRATE 115200
 124
 125 #define CONFIG_HOSTNAME         "ccdc"
 126 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 127 #define CONFIG_BOOTFILE         "ccdc.img"
 128
 129 #define CONFIG_PREBOOT          /* enable preboot variable */
 130
 131 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 132         "netdev=eth1\0"                                         \
 133         "consoledev=ttyS1\0"                                                    \
 134         "u-boot=u-boot.bin\0"                                                   \
 135         "bootfile_addr=1000000\0"                                               \
 136         "keyprogram_addr=3000000\0"                                             \
 137         "keyprogram_file=keyprogram.img\0"                                              \
 138         "fdtfile=controlcenterdc.dtb\0"                                         \
 139         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 140         "mmcdev=0:2\0"                                                          \
 141         "update=sf probe 1:0;"                                                  \
 142                 " sf erase 0 +${filesize};"                                     \
 143                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 144         "upd=run load update\0"                                                 \
 145         "fdt_high=0x10000000\0"                                                 \
 146         "initrd_high=0x10000000\0"                                              \
 147         "loadkeyprogram=tpm flush_keys;"                                        \
 148                 " mmc rescan;"                                                  \
 149                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 150                 " source ${keyprogram_addr}:script@1\0"                         \
 151         "gpio1=gpio@22_25\0"                                                    \
 152         "gpio2=A29\0"                                                           \
 153         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 154                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 155         "bootfail=for i in ${blinkseq}; do"                                     \
 156                 " if test $i -eq 0; then"                                       \
 157                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 158                 " elif test $i -eq 1; then"                                     \
 159                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 160                 " elif test $i -eq 2; then"                                     \
 161                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 162                 " else;"                                                        \
 163                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 164                 " fi; sleep 0.12; done\0"
 165
 166 #define CONFIG_NFSBOOTCOMMAND                                                           \
 167         "setenv bootargs root=/dev/nfs rw "                                             \
 168         "nfsroot=${serverip}:${rootpath} "                                              \
 169         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 170         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 171         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 172         "bootm ${bootfile_addr}"
 173
 174 #define CONFIG_MMCBOOTCOMMAND                                   \
 175         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 176         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 177         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 178         "bootm ${bootfile_addr}"
 179
 180 #define CONFIG_BOOTCOMMAND                      \
 181         "if env exists keyprogram; then;"       \
 182         " setenv keyprogram; run nfsboot;"      \
 183         " fi;"                                  \
 184         " run dobootfail"
 185
 186 /*
 187  * mv-common.h should be defined after CMD configs since it used them
 188  * to enable certain macros
 189  */
 190 #include "mv-common.h"
 191
 192 #endif /* _CONFIG_CONTROLCENTERDC_H */