include/configs/controlcenterdc.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_CONTROLCENTERDC_H
   9 #define _CONFIG_CONTROLCENTERDC_H
  10
  11 /*
  12  * High Level Configuration Options (easy to change)
  13  */
  14 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  17 #define CONFIG_BOARD_LATE_INIT
  18
  19 /*
  20  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  21  * for DDR ECC byte filling in the SPL before loading the main
  22  * U-Boot into it.
  23  */
  24
  25 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  26
  27 #define CONFIG_LOADADDR                 1000000
  28
  29 /*
  30  * Commands configuration
  31  */
  32 #define CONFIG_CMD_I2C
  33 #define CONFIG_CMD_SPI
  34
  35 /* SPI NOR flash default params, used by sf commands */
  36 #define CONFIG_SF_DEFAULT_BUS           1
  37 #define CONFIG_SF_DEFAULT_SPEED         1000000
  38 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  39
  40 /*
  41  * SDIO/MMC Card Configuration
  42  */
  43 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  44
  45 /*
  46  * SATA/SCSI/AHCI configuration
  47  */
  48 #define CONFIG_SCSI_AHCI_PLAT
  49 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  50 #define CONFIG_SYS_SCSI_MAX_LUN         1
  51 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  52                                          CONFIG_SYS_SCSI_MAX_LUN)
  53
  54 /* USB/EHCI configuration */
  55 #define CONFIG_EHCI_IS_TDI
  56
  57 /* Environment in SPI NOR flash */
  58 #define CONFIG_ENV_SPI_BUS              1
  59 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  60 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  61 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  62
  63 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  64 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  65
  66 /* PCIe support */
  67 #ifndef CONFIG_SPL_BUILD
  68 #define CONFIG_PCI
  69 #define CONFIG_PCI_MVEBU
  70 #define CONFIG_PCI_PNP
  71 #define CONFIG_PCI_SCAN_SHOW
  72 #endif
  73
  74 /*
  75  * Software (bit-bang) MII driver configuration
  76  */
  77 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  78 #define CONFIG_BITBANGMII_MULTI
  79
  80 /* SPL */
  81 /*
  82  * Select the boot device here
  83  *
  84  * Currently supported are:
  85  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  86  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  87  */
  88 #define SPL_BOOT_SPI_NOR_FLASH          1
  89 #define SPL_BOOT_SDIO_MMC_CARD          2
  90 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  91
  92 /* Defines for SPL */
  93 #define CONFIG_SPL_SIZE                 (160 << 10)
  94
  95 #if defined(CONFIG_SECURED_MODE_IMAGE)
  96 #define CONFIG_SPL_TEXT_BASE            0x40002614
  97 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  98 #else
  99 #define CONFIG_SPL_TEXT_BASE            0x40000030
 100 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
 101 #endif
 102
 103 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 104 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 105
 106 #ifdef CONFIG_SPL_BUILD
 107 #define CONFIG_SYS_MALLOC_SIMPLE
 108 #endif
 109
 110 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
 111 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 112
 113 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 114 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 115 #define CONFIG_SPL_I2C_SUPPORT
 116
 117 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 118 /* SPL related SPI defines */
 119 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
 120 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 121 #endif
 122
 123 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 124 /* SPL related MMC defines */
 125 #define CONFIG_SPL_MMC_SUPPORT
 126 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 127 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 128 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 129 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 130 #ifdef CONFIG_SPL_BUILD
 131 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 132 #endif
 133 #endif
 134
 135 /*
 136  * Environment Configuration
 137  */
 138 #define CONFIG_ENV_OVERWRITE
 139
 140 #define CONFIG_BAUDRATE 115200
 141
 142 #define CONFIG_HOSTNAME         "ccdc"
 143 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 144 #define CONFIG_BOOTFILE         "ccdc.img"
 145
 146 #define CONFIG_PREBOOT          /* enable preboot variable */
 147
 148 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 149         "netdev=eth1\0"                                         \
 150         "consoledev=ttyS1\0"                                                    \
 151         "u-boot=u-boot.bin\0"                                                   \
 152         "bootfile_addr=1000000\0"                                               \
 153         "keyprogram_addr=3000000\0"                                             \
 154         "keyprogram_file=keyprogram.img\0"                                              \
 155         "fdtfile=controlcenterdc.dtb\0"                                         \
 156         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 157         "mmcdev=0:2\0"                                                          \
 158         "update=sf probe 1:0;"                                                  \
 159                 " sf erase 0 +${filesize};"                                     \
 160                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 161         "upd=run load update\0"                                                 \
 162         "fdt_high=0x10000000\0"                                                 \
 163         "initrd_high=0x10000000\0"                                              \
 164         "loadkeyprogram=tpm flush_keys;"                                        \
 165                 " mmc rescan;"                                                  \
 166                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 167                 " source ${keyprogram_addr}:script@1\0"                         \
 168         "gpio1=gpio@22_25\0"                                                    \
 169         "gpio2=A29\0"                                                           \
 170         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 171                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 172         "bootfail=for i in ${blinkseq}; do"                                     \
 173                 " if test $i -eq 0; then"                                       \
 174                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 175                 " elif test $i -eq 1; then"                                     \
 176                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 177                 " elif test $i -eq 2; then"                                     \
 178                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 179                 " else;"                                                        \
 180                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 181                 " fi; sleep 0.12; done\0"
 182
 183 #define CONFIG_NFSBOOTCOMMAND                                                           \
 184         "setenv bootargs root=/dev/nfs rw "                                             \
 185         "nfsroot=${serverip}:${rootpath} "                                              \
 186         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 187         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 188         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 189         "bootm ${bootfile_addr}"
 190
 191 #define CONFIG_MMCBOOTCOMMAND                                   \
 192         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 193         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 194         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 195         "bootm ${bootfile_addr}"
 196
 197 #define CONFIG_BOOTCOMMAND                      \
 198         "if env exists keyprogram; then;"       \
 199         " setenv keyprogram; run nfsboot;"      \
 200         " fi;"                                  \
 201         " run dobootfail"
 202
 203 /*
 204  * mv-common.h should be defined after CMD configs since it used them
 205  * to enable certain macros
 206  */
 207 #include "mv-common.h"
 208
 209 #endif /* _CONFIG_CONTROLCENTERDC_H */