include/configs/colibri_vf.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2015-2019 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex VF50/VF61 modules.
   6  *
   7  * Based on vf610twr.h:
   8  * Copyright 2013 Freescale Semiconductor, Inc.
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15 #include <linux/sizes.h>
  16
  17 #ifdef CONFIG_VIDEO_FSL_DCU_FB
  18 #define CONFIG_VIDEO_LOGO
  19 #define CONFIG_VIDEO_BMP_LOGO
  20 #define CONFIG_SYS_FSL_DCU_LE
  21
  22 #define CONFIG_SYS_DCU_ADDR             DCU0_BASE_ADDR
  23 #define DCU_LAYER_MAX_NUM               64
  24 #endif
  25
  26 /* NAND support */
  27 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  28
  29 #define CONFIG_IPADDR           192.168.10.2
  30 #define CONFIG_NETMASK          255.255.255.0
  31 #define CONFIG_SERVERIP         192.168.10.1
  32
  33 #define CONFIG_FDTADDR                  0x84000000
  34
  35 /* We boot from the gfxRAM area of the OCRAM. */
  36 #define CONFIG_BOARD_SIZE_LIMIT         520192
  37
  38 #define MEM_LAYOUT_ENV_SETTINGS \
  39         "bootm_size=0x10000000\0" \
  40         "fdt_addr_r=0x82000000\0" \
  41         "kernel_addr_r=0x81000000\0" \
  42         "pxefile_addr_r=0x87100000\0" \
  43         "ramdisk_addr_r=0x82100000\0" \
  44         "scriptaddr=0x87000000\0"
  45
  46 #define UBOOT_UPDATE \
  47         "update_uboot=nand erase.part u-boot && " \
  48                 "nand write ${loadaddr} u-boot ${filesize}\0" \
  49
  50 #define NFS_BOOTCMD \
  51         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  52         "nfsboot=run setup; " \
  53         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
  54         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  55         "dhcp ${kernel_addr_r} && "     \
  56         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  57         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  58
  59 #define UBI_BOOTCMD \
  60         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  61         "ubi.fm_autoconvert=1\0" \
  62         "ubiboot=run setup; " \
  63         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
  64         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  65         "ubi part ubi && " \
  66         "ubi read ${kernel_addr_r} kernel && " \
  67         "ubi read ${fdt_addr_r} dtb && " \
  68         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  69
  70 #define BOOT_TARGET_DEVICES(func) \
  71         func(MMC, mmc, 0) \
  72         func(USB, usb, 0) \
  73         func(DHCP, dhcp, na)
  74 #include <config_distro_bootcmd.h>
  75 #undef BOOTENV_RUN_NET_USB_START
  76 #define BOOTENV_RUN_NET_USB_START ""
  77
  78 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
  79
  80 #define CONFIG_EXTRA_ENV_SETTINGS \
  81         BOOTENV \
  82         MEM_LAYOUT_ENV_SETTINGS \
  83         NFS_BOOTCMD \
  84         UBI_BOOTCMD \
  85         UBOOT_UPDATE \
  86         "console=ttyLP0\0" \
  87         "defargs=user_debug=30\0" \
  88         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
  89         "fdt_board=eval-v3\0" \
  90         "fdt_fixup=;\0" \
  91         "kernel_image=zImage\0" \
  92         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  93         "setsdupdate=mmc rescan && set interface mmc && " \
  94                 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
  95                 "source ${loadaddr}\0" \
  96         "setup=setenv setupargs console=tty1 console=${console}" \
  97                 ",${baudrate}n8 ${memargs}\0" \
  98         "setupdate=run setsdupdate || run setusbupdate\0" \
  99         "setusbupdate=usb start && set interface usb && " \
 100                 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 101                 "source ${loadaddr}\0" \
 102         "splashpos=m,m\0" \
 103         "video-mode=dcufb:640x480-16@60,monitor=lcd\0"
 104
 105 /* Miscellaneous configurable options */
 106 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 107 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 108
 109 /* Physical memory map */
 110 #define PHYS_SDRAM                      (0x80000000)
 111 #define PHYS_SDRAM_SIZE                 (256 * SZ_1M)
 112
 113 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 114 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 115 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 116
 117 #define CONFIG_SYS_INIT_SP_OFFSET \
 118         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 119 #define CONFIG_SYS_INIT_SP_ADDR \
 120         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 121
 122 /* Environment organization */
 123 #ifdef CONFIG_ENV_IS_IN_NAND
 124 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 125 #endif
 126
 127 /* USB Host Support */
 128 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 129 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 130
 131 /* USB DFU */
 132
 133 #endif /* __CONFIG_H */