include/configs/colibri_imx7.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016-2018 Toradex AG
   4  *
   5  * Configuration settings for the Colibri iMX7 module.
   6  *
   7  * based on mx7dsabresd.h:
   8  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   9  */
  10
  11 #ifndef __COLIBRI_IMX7_CONFIG_H
  12 #define __COLIBRI_IMX7_CONFIG_H
  13
  14 #include "mx7_common.h"
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  18
  19 /* MMC Config*/
  20 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  21 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
  22 #define CONFIG_SYS_FSL_USDHC_NUM        1
  23 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
  24 #define CONFIG_SYS_FSL_USDHC_NUM        2
  25 #endif
  26
  27 #define CONFIG_IPADDR                   192.168.10.2
  28 #define CONFIG_NETMASK                  255.255.255.0
  29 #define CONFIG_SERVERIP                 192.168.10.1
  30
  31 #if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
  32 #define UBOOT_UPDATE \
  33         "uboot_hwpart=1\0" \
  34         "uboot_blk=2\0" \
  35         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  36                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  37         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  38                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0"
  39 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
  40 #define UBOOT_UPDATE \
  41         "update_uboot=nand erase.part u-boot1 && " \
  42                 "nand write ${loadaddr} u-boot1 ${filesize} && " \
  43                 "nand erase.part u-boot2 && " \
  44                 "nand write ${loadaddr} u-boot2 ${filesize}\0"
  45 #endif
  46
  47 #ifndef PARTS_DEFAULT
  48 /* Define the default GPT table for eMMC */
  49 #define PARTS_DEFAULT \
  50         /* Android partitions */ \
  51         "partitions_android=" \
  52         "uuid_disk=${uuid_gpt_disk};" \
  53         "name=boot,start=1M,size=32M,uuid=${uuid_gpt_boot};" \
  54         "name=environment,size=4M,uuid=${uuid_gpt_environment};" \
  55         "name=recovery,size=16M,uuid=${uuid_gpt_recovery};" \
  56         "name=system,size=1536M,uuid=${uuid_gpt_system};" \
  57         "name=cache,size=512M,uuid=${uuid_gpt_cache};" \
  58         "name=device,size=8M,uuid=${uuid_gpt_device};" \
  59         "name=misc,size=4M,uuid=${uuid_gpt_misc};" \
  60         "name=datafooter,size=2M,uuid=${uuid_gpt_datafooter};" \
  61         "name=metadata,size=2M,uuid=${uuid_gpt_metadata};" \
  62         "name=persistdata,size=2M,uuid=${uuid_gpt_persistdata};" \
  63         "name=userdata,size=128M,uuid=${uuid_gpt_userdata};" \
  64         "name=fbmisc,size=-,uuid=${uuid_gpt_fbmisc}\0"
  65 #endif /* PARTS_DEFAULT */
  66
  67 #define EMMC_ANDROID_BOOTCMD \
  68         "android_args=androidboot.storage_type=emmc\0" \
  69         PARTS_DEFAULT \
  70         "android_fdt_addr=0x83700000\0" \
  71         "android_mmc_dev=0\0" \
  72         "m4binary=rpmsg_imu_freertos.elf\0" \
  73         "androidboot=ext4load mmc 0:a ${loadaddr} media/0/${m4binary}; "\
  74                 "bootaux ${loadaddr}; " \
  75                 "setenv loadaddr 0x88000000; " \
  76                 "setenv bootm_boot_mode sec;" \
  77                 "setenv bootargs androidboot.serialno=${serial#} " \
  78                         "$android_args; " \
  79                 "part start mmc ${android_mmc_dev} boot boot_start; " \
  80                 "part size mmc ${android_mmc_dev} boot boot_size; " \
  81                 "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \
  82                 "part start mmc ${android_mmc_dev} environment env_start; " \
  83                 "part size mmc ${android_mmc_dev} environment env_size; " \
  84                 "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
  85                 "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
  86
  87 #define MEM_LAYOUT_ENV_SETTINGS \
  88         "bootm_size=0x10000000\0" \
  89         "fdt_addr_r=0x82000000\0" \
  90         "kernel_addr_r=0x81000000\0" \
  91         "pxefile_addr_r=0x87100000\0" \
  92         "ramdisk_addr_r=0x82100000\0" \
  93         "scriptaddr=0x87000000\0"
  94
  95 #define NFS_BOOTCMD \
  96         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  97         "nfsboot=run setup; " \
  98                 "setenv bootargs ${defargs} ${nfsargs} " \
  99                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 100                 "dhcp ${kernel_addr_r} && " \
 101                 "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
 102                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 103
 104 #define UBI_BOOTCMD     \
 105         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 106                 "ubi.fm_autoconvert=1\0" \
 107         "ubiboot=run setup; " \
 108                 "setenv bootargs ${defargs} ${ubiargs} " \
 109                 "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
 110                 "ubi part ubi && run m4boot && " \
 111                 "ubi read ${kernel_addr_r} kernel && " \
 112                 "ubi read ${fdt_addr_r} dtb && " \
 113                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 114
 115 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 116 #define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
 117         "run distro_bootcmd;"
 118 #define MODULE_EXTRA_ENV_SETTINGS \
 119         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 120         UBI_BOOTCMD
 121 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 122 #define MODULE_EXTRA_ENV_SETTINGS \
 123         "variant=-emmc\0" \
 124         EMMC_ANDROID_BOOTCMD
 125 #endif
 126
 127 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 128 #define BOOT_TARGET_DEVICES(func) \
 129         func(MMC, mmc, 0) \
 130         func(USB, usb, 0) \
 131         func(DHCP, dhcp, na)
 132 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 133 #define BOOT_TARGET_DEVICES(func) \
 134         func(MMC, mmc, 1) \
 135         func(MMC, mmc, 0) \
 136         func(USB, usb, 0) \
 137         func(DHCP, dhcp, na)
 138 #endif
 139 #include <config_distro_bootcmd.h>
 140
 141 #define CONFIG_EXTRA_ENV_SETTINGS \
 142         BOOTENV \
 143         MEM_LAYOUT_ENV_SETTINGS \
 144         NFS_BOOTCMD \
 145         MODULE_EXTRA_ENV_SETTINGS \
 146         UBOOT_UPDATE \
 147         "boot_file=zImage\0" \
 148         "bootubipart=ubi\0" \
 149         "console=ttymxc0\0" \
 150         "defargs=\0" \
 151         "fdt_board=eval-v3\0" \
 152         "fdt_fixup=;\0" \
 153         "m4boot=;\0" \
 154         "ip_dyn=yes\0" \
 155         "kernel_file=zImage\0" \
 156         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 157                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 158                 "${board}/flash_eth.img && source ${loadaddr}\0" \
 159         "setsdupdate=mmc rescan && setenv interface mmc && " \
 160                 "fatload ${interface} 0:1 ${loadaddr} " \
 161                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 162         "setup=setenv setupargs " \
 163                 "console=tty1 console=${console}" \
 164                 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
 165         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 166         "setusbupdate=usb start && setenv interface usb && " \
 167                 "fatload ${interface} 0:1 ${loadaddr} " \
 168                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 169         "splashpos=m,m\0" \
 170         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 171         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 172         "updlevel=2\0"
 173
 174 /* Miscellaneous configurable options */
 175
 176 #define CONFIG_SYS_HZ                   1000
 177
 178 /* Physical Memory Map */
 179 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 180
 181 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 182 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 183 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 184
 185 #define CONFIG_SYS_INIT_SP_OFFSET \
 186         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 187 #define CONFIG_SYS_INIT_SP_ADDR \
 188         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 189
 190 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 191 /* NAND stuff */
 192 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 193 #define CONFIG_SYS_NAND_BASE            0x40000000
 194 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 195 #define CONFIG_SYS_NAND_ONFI_DETECTION
 196 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 197 #endif
 198
 199 /* USB Configs */
 200 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 201
 202 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 203 #define CONFIG_MXC_USB_FLAGS            0
 204 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 205
 206 #define CONFIG_USBD_HS
 207
 208 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 209 #define CONFIG_VIDEO_MXS
 210 #define CONFIG_VIDEO_LOGO
 211 #define CONFIG_VIDEO_BMP_LOGO
 212 #endif
 213
 214 #endif