include/configs/colibri_imx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2019 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Colibri iMX6
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/stringify.h>
  12
  13 #include "mx6_common.h"
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/mach-imx/gpio.h>
  17
  18 #ifdef CONFIG_SPL
  19 #include "imx6_spl.h"
  20 #endif
  21
  22 #define CONFIG_MXC_UART_BASE            UART1_BASE
  23
  24 /* MMC Configs */
  25 #define CFG_SYS_FSL_ESDHC_ADDR  0
  26 #define CFG_SYS_FSL_USDHC_NUM   2
  27
  28 /* USB Configs */
  29 /* Host */
  30 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  31 #define CONFIG_MXC_USB_FLAGS            0
  32 /* Client */
  33 #define CONFIG_USBD_HS
  34
  35 /* Framebuffer and LCD */
  36 #define CONFIG_IMX_HDMI
  37 #define CONFIG_IMX_VIDEO_SKIP
  38
  39 /* Command definition */
  40
  41 #undef CONFIG_IPADDR
  42 #define CONFIG_IPADDR                   192.168.10.2
  43 #define CONFIG_NETMASK                  255.255.255.0
  44 #undef CONFIG_SERVERIP
  45 #define CONFIG_SERVERIP                 192.168.10.1
  46
  47 #define BOOT_TARGET_DEVICES(func) \
  48         func(MMC, mmc, 1) \
  49         func(MMC, mmc, 0) \
  50         func(USB, usb, 0) \
  51         func(DHCP, dhcp, na)
  52 #include <config_distro_bootcmd.h>
  53 #undef BOOTENV_RUN_NET_USB_START
  54 #define BOOTENV_RUN_NET_USB_START ""
  55
  56 #define UBOOT_UPDATE \
  57         "uboot_hwpart=1\0" \
  58         "uboot_blk=8a\0" \
  59         "uboot_spl_blk=2\0" \
  60         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  61                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  62         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  63                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
  64         "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  65                 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
  66
  67 #define MEM_LAYOUT_ENV_SETTINGS \
  68         "bootm_size=0x10000000\0" \
  69         "fdt_addr_r=0x18200000\0" \
  70         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  71         "pxefile_addr_r=0x18300000\0" \
  72         "ramdisk_addr_r=0x18400000\0" \
  73         "scriptaddr=0x18280000\0"
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         BOOTENV \
  77         "boot_file=zImage\0" \
  78         "boot_script_dhcp=boot.scr\0" \
  79         "console=ttymxc0\0" \
  80         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
  81         "fdt_board=eval-v3\0" \
  82         "fdt_fixup=;\0" \
  83         MEM_LAYOUT_ENV_SETTINGS \
  84         UBOOT_UPDATE \
  85         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
  86                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
  87                 "flash_eth.img && source ${loadaddr}\0" \
  88         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
  89                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
  90                 "source ${loadaddr}\0" \
  91         "setup=setenv setupargs fec_mac=${ethaddr} " \
  92                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
  93                 "console=${console},${baudrate}n8\0 " \
  94         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
  95         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
  96                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
  97                 "source ${loadaddr}\0" \
  98         "splashpos=m,m\0" \
  99         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 100         "vidargs=fbmem=8M\0"
 101
 102 /* Miscellaneous configurable options */
 103
 104 /* Physical Memory Map */
 105 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 106
 107 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 108 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 109 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 110
 111 #endif  /* __CONFIG_H */