include/configs/cm_t35.h

   1 /*
   2  * (C) Copyright 2011 CompuLab, Ltd.
   3  * Mike Rapoport <mike@compulab.co.il>
   4  * Igor Grinberg <grinberg@compulab.co.il>
   5  *
   6  * Based on omap3_beagle.h
   7  * (C) Copyright 2006-2008
   8  * Texas Instruments.
   9  * Richard Woodruff <r-woodruff2@ti.com>
  10  * Syed Mohammed Khasim <x0khasim@ti.com>
  11  *
  12  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16
  17 #ifndef __CONFIG_H
  18 #define __CONFIG_H
  19
  20 #define CONFIG_SYS_CACHELINE_SIZE       64
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25 #define CONFIG_CM_T3X   /* working with CM-T35 and CM-T3730 */
  26
  27 #define CONFIG_SDRC     /* The chip has SDRC controller */
  28
  29 #include <asm/arch/cpu.h>               /* get chip and board defs */
  30 #include <asm/arch/omap.h>
  31
  32 /* Clock Defines */
  33 #define V_OSCK                  26000000        /* Clock output from T2 */
  34 #define V_SCLK                  (V_OSCK >> 1)
  35
  36 #define CONFIG_MISC_INIT_R
  37
  38 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  39 #define CONFIG_SETUP_MEMORY_TAGS
  40 #define CONFIG_INITRD_TAG
  41 #define CONFIG_REVISION_TAG
  42 #define CONFIG_SERIAL_TAG
  43
  44 /*
  45  * Size of malloc() pool
  46  */
  47 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
  48                                         /* Sector */
  49 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  50
  51 /*
  52  * Hardware drivers
  53  */
  54
  55 /*
  56  * NS16550 Configuration
  57  */
  58 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  59
  60 #define CONFIG_SYS_NS16550_SERIAL
  61 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  62 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  63
  64 /*
  65  * select serial console configuration
  66  */
  67 #define CONFIG_CONS_INDEX               3
  68 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  69 #define CONFIG_SERIAL3                  3       /* UART3 */
  70
  71 /* allow to overwrite serial and ethaddr */
  72 #define CONFIG_ENV_OVERWRITE
  73 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  74                                         115200}
  75
  76 /* USB */
  77 #define CONFIG_USB_OMAP3
  78 #define CONFIG_USB_MUSB_UDC
  79 #define CONFIG_TWL4030_USB
  80
  81 /* USB device configuration */
  82 #define CONFIG_USB_DEVICE
  83 #define CONFIG_USB_TTY
  84
  85 /* commands to include */
  86 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
  87 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  88 #define CONFIG_MTD_PARTITIONS
  89 #define MTDIDS_DEFAULT          "nand0=nand"
  90 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
  91                                 "1920k(u-boot),256k(u-boot-env),"\
  92                                 "4m(kernel),-(fs)"
  93
  94 #define CONFIG_CMD_NAND         /* NAND support                 */
  95
  96 #define CONFIG_SYS_I2C
  97 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  98 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  99 #define CONFIG_SYS_I2C_OMAP34XX
 100 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 101 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 102 #define CONFIG_SYS_I2C_EEPROM_BUS       0
 103 #define CONFIG_I2C_MULTI_BUS
 104
 105 /*
 106  * TWL4030
 107  */
 108 #define CONFIG_TWL4030_LED
 109
 110 /*
 111  * Board NAND Info.
 112  */
 113 #define CONFIG_NAND_OMAP_GPMC
 114 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 115                                                         /* to access nand */
 116 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 117                                                         /* to access nand at */
 118                                                         /* CS0 */
 119 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 120                                                         /* devices */
 121
 122 /* Environment information */
 123 #define CONFIG_EXTRA_ENV_SETTINGS \
 124         "loadaddr=0x82000000\0" \
 125         "usbtty=cdc_acm\0" \
 126         "console=ttyO2,115200n8\0" \
 127         "mpurate=500\0" \
 128         "vram=12M\0" \
 129         "dvimode=1024x768MR-16@60\0" \
 130         "defaultdisplay=dvi\0" \
 131         "mmcdev=0\0" \
 132         "mmcroot=/dev/mmcblk0p2 rw\0" \
 133         "mmcrootfstype=ext4 rootwait\0" \
 134         "nandroot=/dev/mtdblock4 rw\0" \
 135         "nandrootfstype=ubifs\0" \
 136         "mmcargs=setenv bootargs console=${console} " \
 137                 "mpurate=${mpurate} " \
 138                 "vram=${vram} " \
 139                 "omapfb.mode=dvi:${dvimode} " \
 140                 "omapdss.def_disp=${defaultdisplay} " \
 141                 "root=${mmcroot} " \
 142                 "rootfstype=${mmcrootfstype}\0" \
 143         "nandargs=setenv bootargs console=${console} " \
 144                 "mpurate=${mpurate} " \
 145                 "vram=${vram} " \
 146                 "omapfb.mode=dvi:${dvimode} " \
 147                 "omapdss.def_disp=${defaultdisplay} " \
 148                 "root=${nandroot} " \
 149                 "rootfstype=${nandrootfstype}\0" \
 150         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 151         "bootscript=echo Running bootscript from mmc ...; " \
 152                 "source ${loadaddr}\0" \
 153         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 154         "mmcboot=echo Booting from mmc ...; " \
 155                 "run mmcargs; " \
 156                 "bootm ${loadaddr}\0" \
 157         "nandboot=echo Booting from nand ...; " \
 158                 "run nandargs; " \
 159                 "nand read ${loadaddr} 2a0000 400000; " \
 160                 "bootm ${loadaddr}\0" \
 161
 162 #define CONFIG_BOOTCOMMAND \
 163         "mmc dev ${mmcdev}; if mmc rescan; then " \
 164                 "if run loadbootscript; then " \
 165                         "run bootscript; " \
 166                 "else " \
 167                         "if run loaduimage; then " \
 168                                 "run mmcboot; " \
 169                         "else run nandboot; " \
 170                         "fi; " \
 171                 "fi; " \
 172         "else run nandboot; fi"
 173
 174 /*
 175  * Miscellaneous configurable options
 176  */
 177 #define CONFIG_AUTO_COMPLETE
 178 #define CONFIG_CMDLINE_EDITING
 179 #define CONFIG_TIMESTAMP
 180 #define CONFIG_SYS_AUTOLOAD             "no"
 181 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 182 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 183 /* Print Buffer Size */
 184 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 185                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 186 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 187 /* Boot Argument Buffer Size */
 188 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 189
 190 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)     /* memtest */
 191                                                                 /* works on */
 192 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 193                                         0x01F00000) /* 31MB */
 194
 195 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 196                                                         /* load address */
 197
 198 /*
 199  * OMAP3 has 12 GP timers, they can be driven by the system clock
 200  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 201  * This rate is divided by a local divisor.
 202  */
 203 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 204 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 205
 206 /*-----------------------------------------------------------------------
 207  * Physical Memory Map
 208  */
 209 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 is never populated */
 210 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 211
 212 /*-----------------------------------------------------------------------
 213  * FLASH and environment organization
 214  */
 215
 216 /* **** PISMO SUPPORT *** */
 217 /* Monitor at start of flash */
 218 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 219 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 220
 221 #define CONFIG_ENV_IS_IN_NAND
 222 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 223 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 224 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 225
 226 #if defined(CONFIG_CMD_NET)
 227 #define CONFIG_SMC911X
 228 #define CONFIG_SMC911X_32_BIT
 229 #define CM_T3X_SMC911X_BASE     0x2C000000
 230 #define SB_T35_SMC911X_BASE     (CM_T3X_SMC911X_BASE + (16 << 20))
 231 #define CONFIG_SMC911X_BASE     CM_T3X_SMC911X_BASE
 232 #endif /* (CONFIG_CMD_NET) */
 233
 234 /* additions for new relocation code, must be added to all boards */
 235 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 236 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 237 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 238 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 239                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 240                                          GENERATED_GBL_DATA_SIZE)
 241
 242 /* Status LED */
 243 #define GREEN_LED_GPIO                  186 /* CM-T35 Green LED is GPIO186 */
 244
 245 #define CONFIG_SPLASHIMAGE_GUARD
 246
 247 /* Display Configuration */
 248 #define CONFIG_VIDEO_OMAP3
 249 #define LCD_BPP         LCD_COLOR16
 250
 251 #define CONFIG_SPLASH_SCREEN
 252 #define CONFIG_SPLASH_SOURCE
 253 #define CONFIG_BMP_16BPP
 254 #define CONFIG_SCF0403_LCD
 255
 256 #define CONFIG_OMAP3_SPI
 257
 258 /* Defines for SPL */
 259 #define CONFIG_SPL_FRAMEWORK
 260 #define CONFIG_SPL_NAND_SIMPLE
 261
 262 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 263 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 264
 265 #define CONFIG_SPL_NAND_BASE
 266 #define CONFIG_SPL_NAND_DRIVERS
 267 #define CONFIG_SPL_NAND_ECC
 268 #define CONFIG_SPL_OMAP3_ID_NAND
 269 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 270
 271 /* NAND boot config */
 272 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 273 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 274 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 275 #define CONFIG_SYS_NAND_OOBSIZE         64
 276 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 277 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 278 /*
 279  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 280  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 281  */
 282 #define CONFIG_SYS_NAND_ECCPOS          { 1, 2, 3, 4, 5, 6, 7, 8, 9, \
 283                                          10, 11, 12 }
 284 #define CONFIG_SYS_NAND_ECCSIZE         512
 285 #define CONFIG_SYS_NAND_ECCBYTES        3
 286 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 287
 288 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 289 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 290
 291 #define CONFIG_SPL_TEXT_BASE            0x40200800
 292 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 293                                          CONFIG_SPL_TEXT_BASE)
 294
 295 /*
 296  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 297  * older x-loader implementations. And move the BSS area so that it
 298  * doesn't overlap with TEXT_BASE.
 299  */
 300 #define CONFIG_SYS_TEXT_BASE            0x80008000
 301 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 302 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 303
 304 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 305 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 306
 307 /* EEPROM */
 308 #define CONFIG_CMD_EEPROM
 309 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 310 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 311 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 312 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 313 #define CONFIG_SYS_EEPROM_SIZE                  256
 314
 315 #define CONFIG_CMD_EEPROM_LAYOUT
 316 #define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3"
 317
 318 #endif /* __CONFIG_H */