include/configs/cm_fx6.h

   1 /*
   2  * Config file for Compulab CM-FX6 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_CM_FX6_H
  12 #define __CONFIG_CM_FX6_H
  13
  14 #include "mx6_common.h"
  15
  16 /* Machine config */
  17 #define CONFIG_SYS_LITTLE_ENDIAN
  18 #define CONFIG_MACH_TYPE                4273
  19
  20 /* CMD */
  21 #define CONFIG_CMD_MTDPARTS
  22
  23 /* MMC */
  24 #define CONFIG_SYS_FSL_USDHC_NUM        3
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  26
  27 /* RAM */
  28 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  29 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  30 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  31 #define CONFIG_NR_DRAM_BANKS            2
  32 #define CONFIG_SYS_MEMTEST_START        0x10000000
  33 #define CONFIG_SYS_MEMTEST_END          0x10010000
  34 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  35 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  36 #define CONFIG_SYS_INIT_SP_OFFSET \
  37         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  40
  41 /* Serial console */
  42 #define CONFIG_MXC_UART
  43 #define CONFIG_MXC_UART_BASE            UART4_BASE
  44 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  45
  46 /* Shell */
  47 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  48                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  49
  50 /* SPI flash */
  51 #define CONFIG_SF_DEFAULT_BUS           0
  52 #define CONFIG_SF_DEFAULT_CS            0
  53 #define CONFIG_SF_DEFAULT_SPEED         25000000
  54 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  55
  56 /* MTD support */
  57 #ifndef CONFIG_SPL_BUILD
  58 #define CONFIG_MTD_DEVICE
  59 #define CONFIG_MTD_PARTITIONS
  60 #define CONFIG_SPI_FLASH_MTD
  61 #endif
  62
  63 #define MTDIDS_DEFAULT          "nor0=spi0.0"
  64 #define MTDPARTS_DEFAULT        "mtdparts=spi0.0:" \
  65                                 "768k(uboot)," \
  66                                 "256k(uboot-environment)," \
  67                                 "-(reserved)"
  68
  69 /* Environment */
  70 #define CONFIG_ENV_IS_IN_SPI_FLASH
  71 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  72 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  73 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
  74 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
  75 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  76 #define CONFIG_ENV_SIZE                 (8 * 1024)
  77 #define CONFIG_ENV_OFFSET               (768 * 1024)
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         "stdin=serial,usbkbd\0" \
  81         "stdout=serial,vga\0" \
  82         "stderr=serial,vga\0" \
  83         "panel=HDMI\0" \
  84         "autoload=no\0" \
  85         "uImage=uImage-cm-fx6\0" \
  86         "zImage=zImage-cm-fx6\0" \
  87         "kernel=uImage-cm-fx6\0" \
  88         "script=boot.scr\0" \
  89         "dtb=cm-fx6.dtb\0" \
  90         "bootm_low=18000000\0" \
  91         "loadaddr=0x10800000\0" \
  92         "fdtaddr=0x11000000\0" \
  93         "console=ttymxc3,115200\0" \
  94         "ethprime=FEC0\0" \
  95         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
  96         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
  97         "doboot=bootm ${loadaddr}\0" \
  98         "doloadfdt=false\0" \
  99         "mtdids=" MTDIDS_DEFAULT "\0" \
 100         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 101         "setboottypez=setenv kernel ${zImage};" \
 102                 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
 103                 "setenv doloadfdt true;\0" \
 104         "setboottypem=setenv kernel ${uImage};" \
 105                 "setenv doboot bootm ${loadaddr};" \
 106                 "setenv doloadfdt false;\0"\
 107         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 108         "sataroot=/dev/sda2 rw rootwait\0" \
 109         "nandroot=/dev/mtdblock4 rw\0" \
 110         "nandrootfstype=ubifs\0" \
 111         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
 112                 "${video} ${extrabootargs}\0" \
 113         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
 114                 "${video} ${extrabootargs}\0" \
 115         "nandargs=setenv bootargs console=${console} " \
 116                 "root=${nandroot} " \
 117                 "rootfstype=${nandrootfstype} " \
 118                 "${video} ${extrabootargs}\0" \
 119         "nandboot=if run nandloadkernel; then " \
 120                         "run nandloadfdt;" \
 121                         "run setboottypem;" \
 122                         "run storagebootcmd;" \
 123                         "run setboottypez;" \
 124                         "run storagebootcmd;" \
 125                 "fi;\0" \
 126         "run_eboot=echo Starting EBOOT ...; "\
 127                 "mmc dev 2 && " \
 128                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
 129         "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
 130         "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
 131         "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
 132         "bootscript=echo Running bootscript from ${storagetype} ...;" \
 133                    "source ${loadaddr};\0" \
 134         "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
 135         "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
 136         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
 137         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
 138         "setupnandboot=setenv storagetype nand;\0" \
 139         "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
 140         "storagebootcmd=echo Booting from ${storagetype} ...;" \
 141                         "run ${storagetype}args; run doboot;\0" \
 142         "trybootk=if run loadkernel; then " \
 143                 "if ${doloadfdt}; then " \
 144                         "run loadfdt;" \
 145                 "fi;" \
 146                 "run storagebootcmd;" \
 147                 "fi;\0" \
 148         "trybootsmz=if run loadscript; then " \
 149                         "run bootscript;" \
 150                 "fi;" \
 151                 "run setboottypem;" \
 152                 "run trybootk;" \
 153                 "run setboottypez;" \
 154                 "run trybootk;\0"
 155
 156 #define CONFIG_BOOTCOMMAND \
 157         "run setupmmcboot;" \
 158         "mmc dev ${storagedev};" \
 159         "if mmc rescan; then " \
 160                 "run trybootsmz;" \
 161         "fi;" \
 162         "run setupusbboot;" \
 163         "if usb start; then "\
 164                 "if run loadscript; then " \
 165                         "run bootscript;" \
 166                 "fi;" \
 167         "fi;" \
 168         "run setupsataboot;" \
 169         "if sata init; then " \
 170                 "run trybootsmz;" \
 171         "fi;" \
 172         "run setupnandboot;" \
 173         "run nandboot;"
 174
 175 #define CONFIG_PREBOOT          "usb start;sf probe"
 176
 177 /* SPI */
 178 #define CONFIG_SPI
 179 #define CONFIG_MXC_SPI
 180
 181 /* NAND */
 182 #ifndef CONFIG_SPL_BUILD
 183 #define CONFIG_CMD_NAND
 184 #define CONFIG_SYS_NAND_BASE            0x40000000
 185 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 186 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 187 #define CONFIG_NAND_MXS
 188 #define CONFIG_SYS_NAND_ONFI_DETECTION
 189 /* APBH DMA is required for NAND support */
 190 #define CONFIG_APBH_DMA
 191 #define CONFIG_APBH_DMA_BURST
 192 #define CONFIG_APBH_DMA_BURST8
 193 #endif
 194
 195 /* Ethernet */
 196 #define CONFIG_FEC_MXC
 197 #define CONFIG_FEC_MXC_PHYADDR          0
 198 #define CONFIG_FEC_XCV_TYPE             RGMII
 199 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 200 #define CONFIG_PHYLIB
 201 #define CONFIG_PHY_ATHEROS
 202 #define CONFIG_MII
 203 #define CONFIG_ETHPRIME                 "FEC0"
 204 #define CONFIG_ARP_TIMEOUT              200UL
 205 #define CONFIG_NET_RETRY_COUNT          5
 206
 207 /* USB */
 208 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 209 #define CONFIG_MXC_USB_FLAGS            0
 210 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 211 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 212
 213 /* I2C */
 214 #define CONFIG_SYS_I2C
 215 #define CONFIG_SYS_I2C_MXC
 216 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 217 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 218 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 219 #define CONFIG_SYS_I2C_SPEED            100000
 220 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
 221
 222 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 224 #define CONFIG_SYS_I2C_EEPROM_BUS       2
 225
 226 /* SATA */
 227 #define CONFIG_CMD_SATA
 228 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 229 #define CONFIG_LIBATA
 230 #define CONFIG_LBA48
 231 #define CONFIG_DWC_AHSATA
 232 #define CONFIG_DWC_AHSATA_PORT_ID       0
 233 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 234
 235 /* Boot */
 236 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 237 #define CONFIG_SERIAL_TAG
 238
 239 /* misc */
 240 #define CONFIG_SYS_MALLOC_LEN                   (10 * 1024 * 1024)
 241 #define CONFIG_MISC_INIT_R
 242
 243 /* SPL */
 244 #include "imx6_spl.h"
 245 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
 246 #define CONFIG_SPL_SPI_LOAD
 247
 248 /* Display */
 249 #define CONFIG_VIDEO_IPUV3
 250 #define CONFIG_IPUV3_CLK          260000000
 251 #define CONFIG_IMX_HDMI
 252
 253 #define CONFIG_SPLASH_SCREEN
 254 #define CONFIG_SPLASH_SOURCE
 255 #define CONFIG_VIDEO_BMP_RLE8
 256
 257 #define CONFIG_VIDEO_LOGO
 258 #define CONFIG_VIDEO_BMP_LOGO
 259
 260 /* EEPROM */
 261 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 262 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 263 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 264 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 265 #define CONFIG_SYS_EEPROM_SIZE                  256
 266
 267 #endif  /* __CONFIG_CM_FX6_H */