include/configs/cm_fx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Config file for Compulab CM-FX6 board
   4  *
   5  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   6  *
   7  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   8  */
   9
  10 #ifndef __CONFIG_CM_FX6_H
  11 #define __CONFIG_CM_FX6_H
  12
  13 #include "mx6_common.h"
  14
  15 /* Machine config */
  16
  17 /* MMC */
  18 #define CONFIG_SYS_FSL_USDHC_NUM        3
  19 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  20
  21 /* RAM */
  22 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  23 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  24 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  25 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  26 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  27
  28 /* Serial console */
  29 #define CONFIG_MXC_UART_BASE            UART4_BASE
  30
  31 /* Environment */
  32
  33 #ifndef CONFIG_SPL_BUILD
  34 #define CONFIG_EXTRA_ENV_SETTINGS \
  35         "fdt_high=0xffffffff\0" \
  36         "initrd_high=0xffffffff\0" \
  37         "fdt_addr_r=0x18000000\0" \
  38         "ramdisk_addr_r=0x13000000\0" \
  39         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  40         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  41         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  42         "fdtfile=undefined\0" \
  43         "stdin=serial,usbkbd\0" \
  44         "stdout=serial,vidconsole\0" \
  45         "stderr=serial,vidconsole\0" \
  46         "panel=HDMI\0" \
  47         "autoload=no\0" \
  48         "uImage=uImage-cm-fx6\0" \
  49         "zImage=zImage-cm-fx6\0" \
  50         "kernel=uImage-cm-fx6\0" \
  51         "dtb=cm-fx6.dtb\0" \
  52         "console=ttymxc3,115200\0" \
  53         "ethprime=FEC0\0" \
  54         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
  55         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
  56         "doboot=bootm ${kernel_addr_r}\0" \
  57         "doloadfdt=false\0" \
  58         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  59         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  60         "setboottypez=setenv kernel ${zImage};" \
  61                 "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
  62                 "setenv doloadfdt true;\0" \
  63         "setboottypem=setenv kernel ${uImage};" \
  64                 "setenv doboot bootm ${kernel_addr_r};" \
  65                 "setenv doloadfdt false;\0"\
  66         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
  67         "sataroot=/dev/sda2 rw rootwait\0" \
  68         "nandroot=/dev/mtdblock4 rw\0" \
  69         "nandrootfstype=ubifs\0" \
  70         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
  71                 "${video} ${extrabootargs}\0" \
  72         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
  73                 "${video} ${extrabootargs}\0" \
  74         "nandargs=setenv bootargs console=${console} " \
  75                 "root=${nandroot} " \
  76                 "rootfstype=${nandrootfstype} " \
  77                 "${video} ${extrabootargs}\0" \
  78         "nandboot=if run nandloadkernel; then " \
  79                         "run nandloadfdt;" \
  80                         "run setboottypem;" \
  81                         "run storagebootcmd;" \
  82                         "run setboottypez;" \
  83                         "run storagebootcmd;" \
  84                 "fi;\0" \
  85         "run_eboot=echo Starting EBOOT ...; "\
  86                 "mmc dev 2 && " \
  87                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
  88         "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
  89         "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
  90         "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
  91         "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
  92         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
  93         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
  94         "setupnandboot=setenv storagetype nand;\0" \
  95         "storagebootcmd=echo Booting from ${storagetype} ...;" \
  96                         "run ${storagetype}args; run doboot;\0" \
  97         "trybootk=if run loadkernel; then " \
  98                 "if ${doloadfdt}; then " \
  99                         "run loadfdt;" \
 100                 "fi;" \
 101                 "run storagebootcmd;" \
 102                 "fi;\0" \
 103         "trybootsmz=" \
 104                 "run setboottypem;" \
 105                 "run trybootk;" \
 106                 "run setboottypez;" \
 107                 "run trybootk;\0" \
 108         "legacy_bootcmd=" \
 109                 "run setupmmcboot;" \
 110                 "mmc dev ${storagedev};" \
 111                 "if mmc rescan; then " \
 112                         "run trybootsmz;" \
 113                 "fi;" \
 114                 "run setupsataboot;" \
 115                 "if sata init; then " \
 116                         "run trybootsmz;" \
 117                 "fi;" \
 118                 "run setupnandboot;" \
 119                 "run nandboot;\0" \
 120         "findfdt="\
 121                 "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
 122                         "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
 123                 "if test $fdtfile = undefined; then " \
 124                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 125         BOOTENV
 126
 127 #define BOOT_TARGET_DEVICES(func) \
 128         func(USB, usb, 0) \
 129         func(MMC, mmc, 2) \
 130         func(SATA, sata, 0)
 131
 132 #include <config_distro_bootcmd.h>
 133 #else
 134 #define CONFIG_EXTRA_ENV_SETTINGS
 135 #endif
 136
 137 /* NAND */
 138 #ifndef CONFIG_SPL_BUILD
 139 #define CONFIG_SYS_NAND_BASE            0x40000000
 140 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 141 /* APBH DMA is required for NAND support */
 142 #endif
 143
 144 /* Ethernet */
 145 #define CONFIG_FEC_MXC_PHYADDR          0
 146
 147 /* USB */
 148 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 149 #define CONFIG_MXC_USB_FLAGS            0
 150 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 151
 152 /* SATA */
 153 #define CONFIG_LBA48
 154 #define CONFIG_DWC_AHSATA_PORT_ID       0
 155 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 156
 157 /* Boot */
 158 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 159
 160 /* misc */
 161
 162 /* SPL */
 163 #include "imx6_spl.h"
 164
 165 /* Display */
 166 #define CONFIG_IMX_HDMI
 167
 168 /* EEPROM */
 169
 170 #endif  /* __CONFIG_CM_FX6_H */