797fcb14590a9e406db3dba02f8bca8d14459bd6
[platform/kernel/u-boot.git] / include / configs / cgtqmx6eval.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  *
4  * Congatec Conga-QEVAl board configuration file.
5  *
6  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
7  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
8  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
9  * Leo Sartre, <lsartre@adeneo-embedded.com>
10  */
11
12 #ifndef __CONFIG_CGTQMX6EVAL_H
13 #define __CONFIG_CGTQMX6EVAL_H
14
15 #include "mx6_common.h"
16
17 #define CONFIG_MACH_TYPE        4122
18
19 #ifdef CONFIG_SPL
20 #include "imx6_spl.h"
21 #endif
22
23 /* Size of malloc() pool */
24 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
25
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE           UART2_BASE
28
29 /* MMC Configs */
30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
31
32 /* SPI NOR */
33 #define CONFIG_SPI_FLASH_STMICRO
34 #define CONFIG_SPI_FLASH_SST
35
36 /* Thermal support */
37 #define CONFIG_IMX_THERMAL
38
39 /* I2C Configs */
40 #define CONFIG_SYS_I2C
41 #define CONFIG_SYS_I2C_MXC
42 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
43 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
44 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
45 #define CONFIG_SYS_I2C_SPEED              100000
46
47 /* PMIC */
48 #define CONFIG_POWER
49 #define CONFIG_POWER_I2C
50 #define CONFIG_POWER_PFUZE100
51 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
52
53 /* USB Configs */
54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
55 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
56 #define CONFIG_MXC_USB_FLAGS    0
57 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
58
59 #define CONFIG_USBD_HS
60
61 /* Framebuffer */
62 #define CONFIG_VIDEO_BMP_RLE8
63 #define CONFIG_SPLASH_SCREEN
64 #define CONFIG_SPLASH_SCREEN_ALIGN
65 #define CONFIG_BMP_16BPP
66 #define CONFIG_VIDEO_LOGO
67 #define CONFIG_VIDEO_BMP_LOGO
68 #define CONFIG_IMX_HDMI
69
70 /* SATA */
71 #define CONFIG_SYS_SATA_MAX_DEVICE      1
72 #define CONFIG_DWC_AHSATA_PORT_ID       0
73 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
74 #define CONFIG_LBA48
75
76 /* Ethernet */
77 #define CONFIG_FEC_MXC
78 #define IMX_FEC_BASE                    ENET_BASE_ADDR
79 #define CONFIG_FEC_XCV_TYPE             RGMII
80 #define CONFIG_ETHPRIME                 "FEC"
81 #define CONFIG_FEC_MXC_PHYADDR          6
82
83 /* Command definition */
84
85 #define CONFIG_MXC_UART_BASE    UART2_BASE
86 #define CONSOLE_DEV     "ttymxc1"
87 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
88 #define CONFIG_SYS_MMC_ENV_DEV          0
89
90 #define CONFIG_EXTRA_ENV_SETTINGS \
91         "script=boot.scr\0" \
92         "image=zImage\0" \
93         "fdtfile=undefined\0" \
94         "fdt_addr_r=0x18000000\0" \
95         "boot_fdt=try\0" \
96         "ip_dyn=yes\0" \
97         "console=" CONSOLE_DEV "\0" \
98         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
99         "dfu_alt_info_spl=spl raw 0x400\0" \
100         "dfu_alt_info_img=u-boot raw 0x10000\0" \
101         "dfu_alt_info=spl raw 0x400\0" \
102         "bootm_size=0x10000000\0" \
103         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
104         "mmcpart=1\0" \
105         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
106         "update_sd_firmware=" \
107                 "if test ${ip_dyn} = yes; then " \
108                         "setenv get_cmd dhcp; " \
109                 "else " \
110                         "setenv get_cmd tftp; " \
111                 "fi; " \
112                 "if mmc dev ${mmcdev}; then "   \
113                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
114                                 "setexpr fw_sz ${filesize} / 0x200; " \
115                                 "setexpr fw_sz ${fw_sz} + 1; "  \
116                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
117                         "fi; "  \
118                 "fi\0" \
119         "mmcargs=setenv bootargs console=${console},${baudrate} " \
120                 "root=${mmcroot}\0" \
121         "loadbootscript=" \
122                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
123         "bootscript=echo Running bootscript from mmc ...; " \
124                 "source\0" \
125         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
126         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
127         "mmcboot=echo Booting from mmc ...; " \
128                 "run mmcargs; " \
129                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
130                         "if run loadfdt; then " \
131                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
132                         "else " \
133                                 "if test ${boot_fdt} = try; then " \
134                                         "bootz; " \
135                                 "else " \
136                                         "echo WARN: Cannot load the DT; " \
137                                 "fi; " \
138                         "fi; " \
139                 "else " \
140                         "bootz; " \
141                 "fi;\0" \
142         "findfdt="\
143                 "if test $board_rev = MX6Q ; then " \
144                         "setenv fdtfile imx6q-qmx6.dtb; fi; " \
145                 "if test $board_rev = MX6DL ; then " \
146                         "setenv fdtfile imx6dl-qmx6.dtb; fi; " \
147                 "if test $fdtfile = undefined; then " \
148                         "echo WARNING: Could not determine dtb to use; fi; \0" \
149         "netargs=setenv bootargs console=${console},${baudrate} " \
150                 "root=/dev/nfs " \
151                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
152         "netboot=echo Booting from net ...; " \
153                 "run netargs; " \
154                 "if test ${ip_dyn} = yes; then " \
155                         "setenv get_cmd dhcp; " \
156                 "else " \
157                         "setenv get_cmd tftp; " \
158                 "fi; " \
159                 "${get_cmd} ${image}; " \
160                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
161                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
162                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
163                         "else " \
164                                 "if test ${boot_fdt} = try; then " \
165                                         "bootz; " \
166                                 "else " \
167                                         "echo WARN: Cannot load the DT; " \
168                                 "fi; " \
169                         "fi; " \
170                 "else " \
171                         "bootz; " \
172                 "fi;\0" \
173         "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
174
175 #define CONFIG_BOOTCOMMAND \
176         "run spilock;"      \
177         "run findfdt; " \
178         "mmc dev ${mmcdev};" \
179         "if mmc rescan; then " \
180                 "if run loadbootscript; then " \
181                 "run bootscript; " \
182                 "else " \
183                         "if run loadimage; then " \
184                                 "run mmcboot; " \
185                         "else run netboot; " \
186                         "fi; " \
187                 "fi; " \
188         "else run netboot; fi"
189
190 #define CONFIG_SYS_MEMTEST_START       0x10000000
191 #define CONFIG_SYS_MEMTEST_END         0x10010000
192 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
193
194 /* Physical Memory Map */
195 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
196
197 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
198 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
199 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
200
201 #define CONFIG_SYS_INIT_SP_OFFSET \
202         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
203 #define CONFIG_SYS_INIT_SP_ADDR \
204         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
205
206 /* Environment organization */
207 #if defined (CONFIG_ENV_IS_IN_MMC)
208 #define CONFIG_SYS_MMC_ENV_DEV          0
209 #endif
210
211 #endif                         /* __CONFIG_CGTQMX6EVAL_H */