Merge git://git.denx.de/u-boot-dm
[platform/kernel/u-boot.git] / include / configs / canmb.h
1 /*
2  * (C) Copyright 2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 /*
12  * High Level Configuration Options
13  * (easy to change)
14  */
15
16 #define CONFIG_MPC5200          1       /* This is a MPC5200 CPU */
17 #define CONFIG_CANMB            1       /* ... on canmb board - we need this for FEC.C */
18 #define CONFIG_DISPLAY_BOARDINFO
19
20 /*
21  * allowed and functional CONFIG_SYS_TEXT_BASE values:
22  * 0xfe000000   low boot at 0x00000100 (default board setting)
23  * 0x00100000   RAM load and test
24  */
25 #define CONFIG_SYS_TEXT_BASE    0xFE000000
26
27 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz */
28
29 #define CONFIG_BOARD_EARLY_INIT_R
30
31 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
32
33 /*
34  * Serial console configuration
35  */
36 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
37 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
38 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
39
40
41 /*
42  * BOOTP options
43  */
44 #define CONFIG_BOOTP_BOOTFILESIZE
45 #define CONFIG_BOOTP_BOOTPATH
46 #define CONFIG_BOOTP_GATEWAY
47 #define CONFIG_BOOTP_HOSTNAME
48
49
50 /*
51  * Command line configuration.
52  */
53 #define CONFIG_CMD_ASKENV
54 #define CONFIG_CMD_DATE
55 #define CONFIG_CMD_DHCP
56 #define CONFIG_CMD_IMMAP
57 #define CONFIG_CMD_MII
58 #define CONFIG_CMD_REGINFO
59 #define CONFIG_CMD_SNTP
60
61
62 /*
63  * MUST be low boot - HIGHBOOT is not supported anymore
64  */
65 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000)                /* Boot low with 32 MB Flash */
66 #   define CONFIG_SYS_LOWBOOT           1
67 #   define CONFIG_SYS_LOWBOOT16 1
68 #else
69 #   error "CONFIG_SYS_TEXT_BASE must be 0xFE000000"
70 #endif
71
72 /*
73  * Autobooting
74  */
75 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
76
77 #define CONFIG_PREBOOT  "echo;" \
78         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
79         "echo"
80
81 #undef  CONFIG_BOOTARGS
82
83 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
84         "netdev=eth0\0"                                                 \
85         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
86                 "nfsroot=${serverip}:${rootpath}\0"                     \
87         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
88         "addip=setenv bootargs ${bootargs} "                            \
89                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
90                 ":${hostname}:${netdev}:off panic=1\0"                  \
91         "flash_nfs=run nfsargs addip;"                                  \
92                 "bootm ${kernel_addr}\0"                                \
93         "flash_self=run ramargs addip;"                                 \
94                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
95         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
96         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
97         "bootfile=/tftpboot/canmb/uImage\0"                             \
98         ""
99
100 #define CONFIG_BOOTCOMMAND      "run flash_self"
101
102 /*
103  * IPB Bus clocking configuration.
104  */
105 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK          /* define for 133MHz speed */
106
107 /*
108  * Flash configuration, expect one 16 Megabyte Bank at most
109  */
110 #define CONFIG_SYS_FLASH_BASE           0xFE000000
111 #define CONFIG_SYS_FLASH_SIZE           0x02000000
112 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks      */
113 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max num of sects on one chip */
114
115 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
116 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
117
118 #define CONFIG_FLASH_CFI_DRIVER
119 #define CONFIG_SYS_FLASH_CFI
120 #define CONFIG_SYS_FLASH_EMPTY_INFO
121
122 /*
123  * Environment settings
124  */
125 #define CONFIG_ENV_IS_IN_FLASH  1
126 #define CONFIG_ENV_OFFSET               (2*128*1024)
127 #define CONFIG_ENV_SIZE         0x2000
128 #define CONFIG_ENV_SECT_SIZE       (128*1024)
129
130 /*
131  * Memory map
132  *
133  * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
134  */
135 #define CONFIG_SYS_MBAR                 0xf0000000      /* DO NOT CHANGE this */
136 #define CONFIG_SYS_SDRAM_BASE           0x00000000
137 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
138
139 /* Use SRAM until RAM will be available */
140 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
141 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
142
143
144 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
145 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
146
147 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
148 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
149 #   define CONFIG_SYS_RAMBOOT           1
150 #endif
151
152 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
153 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
154 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
155
156 /*
157  * Ethernet configuration
158  */
159 #define CONFIG_MPC5xxx_FEC      1
160 #define CONFIG_MPC5xxx_FEC_MII100
161 #define CONFIG_PHY_ADDR         0x0
162 /*
163  * GPIO configuration:
164  * PSC1,2,3 predefined as UART
165  * PCI disabled
166  * Ethernet 100 with MD
167  */
168 #define CONFIG_SYS_GPS_PORT_CONFIG      0x00058444
169
170 /*
171  * Miscellaneous configurable options
172  */
173 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
174 #if defined(CONFIG_CMD_KGDB)
175 #  define CONFIG_SYS_CBSIZE             1024    /* Console I/O Buffer Size  */
176 #else
177 #  define CONFIG_SYS_CBSIZE             256     /* Console I/O Buffer Size  */
178 #endif
179 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
180 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
181 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
182
183 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
184 #define CONFIG_SYS_MEMTEST_END          0x01f00000      /* 1 ... 31 MB in DRAM  */
185
186 #define CONFIG_SYS_LOAD_ADDR            0x200000        /* default load address */
187
188 #define CONFIG_RTC_MPC5200      1       /* use internal MPC5200 RTC */
189
190 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
191 #if defined(CONFIG_CMD_KGDB)
192 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
193 #endif
194
195 /*
196  * Various low-level settings
197  */
198 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
199 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
200
201 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
202 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
203 #define CONFIG_SYS_BOOTCS_CFG           0x00047D01
204 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
205 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
206
207 #define CONFIG_SYS_CS_BURST             0x00000000
208 #define CONFIG_SYS_CS_DEADCYCLE 0x33333333
209
210 #define CONFIG_SYS_RESET_ADDRESS        0x7f000000
211
212 #endif /* __CONFIG_H */