serial: sh: Convert to Kconfig
[platform/kernel/u-boot.git] / include / configs / blanche.h
1 /*
2  * include/configs/blanche.h
3  *     This file is blanche board configuration.
4  *
5  * Copyright (C) 2016 Renesas Electronics Corporation
6  *
7  * SPDX-License-Identifier: GPL-2.0
8  */
9
10 #ifndef __BLANCHE_H
11 #define __BLANCHE_H
12
13 #undef DEBUG
14 #define CONFIG_R8A7792
15 #define CONFIG_RMOBILE_BOARD_STRING "Blanche"
16
17 #include "rcar-gen2-common.h"
18
19 /* STACK */
20 #define CONFIG_SYS_INIT_SP_ADDR         0xE817FFFC
21 #define STACK_AREA_SIZE                 0xC000
22 #define LOW_LEVEL_MERAM_STACK   \
23                 (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
24
25 /* MEMORY */
26 #define RCAR_GEN2_SDRAM_BASE            0x40000000
27 #define RCAR_GEN2_SDRAM_SIZE            (1024u * 1024 * 1024)
28 #define RCAR_GEN2_UBOOT_SDRAM_SIZE      (512 * 1024 * 1024)
29
30 /* SCIF */
31 #define CONFIG_CONS_SCIF0
32
33 #define CONFIG_SYS_MEMTEST_START        (RCAR_GEN2_SDRAM_BASE)
34 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 504 * 1024 * 1024)
35
36 #undef  CONFIG_SYS_ALT_MEMTEST
37 #undef  CONFIG_SYS_MEMTEST_SCRATCH
38 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
39
40 /* FLASH */
41 #if !defined(CONFIG_MTD_NOR_FLASH)
42 #define CONFIG_SYS_TEXT_BASE    0x40000000
43 #define CONFIG_SPI
44 #define CONFIG_SH_QSPI
45 #define CONFIG_SH_QSPI_BASE     0xE6B10000
46 #else
47 #define CONFIG_SYS_TEXT_BASE            0x00000000
48 #define CONFIG_SYS_FLASH_CFI
49 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
50 #define CONFIG_FLASH_CFI_DRIVER
51 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
52 #define CONFIG_FLASH_SHOW_PROGRESS      45
53 #define CONFIG_SYS_FLASH_BASE           0x00000000
54 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* 64 MB */
55 #define CONFIG_SYS_MAX_FLASH_SECT       1024
56 #define CONFIG_SYS_MAX_FLASH_BANKS      1
57 #define CONFIG_SYS_FLASH_BANKS_LIST     { (CONFIG_SYS_FLASH_BASE) }
58 #define CONFIG_SYS_FLASH_BANKS_SIZES    { (CONFIG_SYS_FLASH_SIZE) }
59
60 #define CONFIG_SYS_FLASH_ERASE_TOUT     3000
61 #define CONFIG_SYS_FLASH_WRITE_TOUT     3000
62 #define CONFIG_SYS_FLASH_LOCK_TOUT      3000
63 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    3000
64 #undef  CONFIG_CMD_SF
65 #undef  CONFIG_CMD_SPI
66 #endif
67
68 /* BLANCHE on board LANC: SMC89218 (ExCS0) */
69 #define CONFIG_NET_MULTI
70 #define CONFIG_SMC911X                  1
71 #define CONFIG_SMC911X_16_BIT           1
72 #define CONFIG_SMC911X_BASE             0x18000000
73
74 /* Board Clock */
75 #define RMOBILE_XTAL_CLK        20000000u
76 #define CONFIG_SYS_CLK_FREQ     RMOBILE_XTAL_CLK
77 #define CONFIG_SH_TMU_CLK_FREQ  (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
78 #define CONFIG_SYS_TMU_CLK_DIV  4
79
80 /* ENV setting */
81 #if !defined(CONFIG_MTD_NOR_FLASH)
82 #else
83 #undef  CONFIG_ENV_ADDR
84 #define CONFIG_ENV_SECT_SIZE    (256 * 1024)
85 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
86 #define CONFIG_ENV_OFFSET       (CONFIG_ENV_ADDR)
87 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
88 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_SYS_MONITOR_LEN)
89 #endif
90
91 /* USB */
92 #undef CONFIG_CMD_USB
93
94 /* Module stop status bits */
95 /* INTC-RT */
96 #define CONFIG_SMSTP0_ENA       0x00400000
97 /* SDHI0 */
98 #define CONFIG_SMSTP3_ENA       0x00004000
99 /* INTC-SYS, IRQC */
100 #define CONFIG_SMSTP4_ENA       0x00000180
101 /* SCIF0 */
102 #define CONFIG_SMSTP7_ENA       0x00200000
103 /* QSPI */
104 #define CONFIG_SMSTP9_ENA       0x00020000
105 /* SYS-DMAC0 */
106 #define CONFIG_RMSTP2_ENA       0x00080000
107
108 /* SDHI */
109 #define CONFIG_SH_SDHI_FREQ     97500000
110 #define HAVE_BLOCK_DEVICE
111
112 #endif  /* __BLANCHE_H */