include/configs/at91sam9x5ek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012 Atmel Corporation
   4  *
   5  * Configuation settings for the AT91SAM9X5EK board.
   6  */
   7
   8 #ifndef __CONFIG_H__
   9 #define __CONFIG_H__
  10
  11 /* ARM asynchronous clock */
  12 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  13 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  14
  15 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  16 #define CONFIG_SETUP_MEMORY_TAGS
  17 #define CONFIG_INITRD_TAG
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19
  20 /* general purpose I/O */
  21 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  22
  23 /*
  24  * BOOTP options
  25  */
  26 #define CONFIG_BOOTP_BOOTFILESIZE
  27
  28 /*
  29  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
  30  * NB: in this case, USB 1.1 devices won't be recognized.
  31  */
  32
  33 /* SDRAM */
  34 #define CONFIG_NR_DRAM_BANKS            1
  35 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  36 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
  37
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
  40
  41 /* DataFlash */
  42 #ifdef CONFIG_CMD_SF
  43 #define CONFIG_SF_DEFAULT_SPEED         30000000
  44 #endif
  45
  46 /* NAND flash */
  47 #ifdef CONFIG_CMD_NAND
  48 #define CONFIG_NAND_ATMEL
  49 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  50 #define CONFIG_SYS_NAND_BASE            0x40000000
  51 #define CONFIG_SYS_NAND_DBW_8           1
  52 /* our ALE is AD21 */
  53 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  54 /* our CLE is AD22 */
  55 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  56 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
  57 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
  58
  59 #define CONFIG_MTD_DEVICE
  60 #define CONFIG_MTD_PARTITIONS
  61 #endif
  62
  63 /* PMECC & PMERRLOC */
  64 #define CONFIG_ATMEL_NAND_HWECC         1
  65 #define CONFIG_ATMEL_NAND_HW_PMECC      1
  66 #define CONFIG_PMECC_CAP                2
  67 #define CONFIG_PMECC_SECTOR_SIZE        512
  68
  69 /* USB */
  70 #ifdef CONFIG_CMD_USB
  71 #ifndef CONFIG_USB_EHCI_HCD
  72 #define CONFIG_USB_ATMEL
  73 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
  74 #define CONFIG_USB_OHCI_NEW
  75 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  76 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
  77 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9x5"
  78 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
  79 #endif
  80 #endif
  81
  82 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
  83
  84 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  85 #define CONFIG_SYS_MEMTEST_END          0x26e00000
  86
  87 #ifdef CONFIG_NAND_BOOT
  88 /* bootstrap + u-boot + env + linux in nandflash */
  89 #define CONFIG_ENV_OFFSET               0x140000
  90 #define CONFIG_ENV_OFFSET_REDUND        0x100000
  91 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
  92 #define CONFIG_BOOTCOMMAND      "nand read " \
  93                                 "0x22000000 0x200000 0x300000; " \
  94                                 "bootm 0x22000000"
  95 #elif defined(CONFIG_SPI_BOOT)
  96 /* bootstrap + u-boot + env + linux in spi flash */
  97 #define CONFIG_ENV_OFFSET       0x5000
  98 #define CONFIG_ENV_SIZE         0x3000
  99 #define CONFIG_ENV_SECT_SIZE    0x1000
 100 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 101 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 102                                 "sf read 0x22000000 0x100000 0x300000; " \
 103                                 "bootm 0x22000000"
 104 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 105 /* bootstrap + u-boot + env + linux in data flash */
 106 #define CONFIG_ENV_OFFSET       0x4200
 107 #define CONFIG_ENV_SIZE         0x4200
 108 #define CONFIG_ENV_SECT_SIZE    0x210
 109 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 110 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 111                                 "sf read 0x22000000 0x84000 0x294000; " \
 112                                 "bootm 0x22000000"
 113 #else /* CONFIG_SD_BOOT */
 114 /* bootstrap + u-boot + env + linux in mmc */
 115 #define CONFIG_ENV_SIZE         0x4000
 116 #endif
 117
 118 /*
 119  * Size of malloc() pool
 120  */
 121 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024 + 0x1000)
 122
 123 /* SPL */
 124 #define CONFIG_SPL_TEXT_BASE            0x300000
 125 #define CONFIG_SPL_MAX_SIZE             0x6000
 126 #define CONFIG_SPL_STACK                0x308000
 127
 128 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 129 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 130 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 131 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 132
 133 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 134
 135 #define CONFIG_SYS_MASTER_CLOCK         132096000
 136 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
 137 #define CONFIG_SYS_MCKR                 0x1301
 138 #define CONFIG_SYS_MCKR_CSS             0x1302
 139
 140 #ifdef CONFIG_SD_BOOT
 141 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 142 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 143
 144 #elif CONFIG_SPI_BOOT
 145 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8400
 146
 147 #elif CONFIG_NAND_BOOT
 148 #define CONFIG_SPL_NAND_DRIVERS
 149 #define CONFIG_SPL_NAND_BASE
 150 #endif
 151 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 152 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 153 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 154 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 155 #define CONFIG_SYS_NAND_OOBSIZE         64
 156 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
 157 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 158 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 159
 160 #endif