Merge tag 'xilinx-for-v2022.01-rc1' of https://source.denx.de/u-boot/custodians/u...
[platform/kernel/u-boot.git] / include / configs / at91sam9m10g45ek.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2007-2008
4  * Stelian Pop <stelian@popies.net>
5  * Lead Tech Design <www.leadtechdesign.com>
6  *
7  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
14
15 /* ARM asynchronous clock */
16 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
17 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
18
19 #define CONFIG_AT91SAM9M10G45EK
20
21 /* general purpose I/O */
22 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
23
24 /* LCD */
25 #define LCD_BPP                         LCD_COLOR8
26 #define CONFIG_LCD_LOGO
27 #undef LCD_TEST_PATTERN
28 #define CONFIG_LCD_INFO
29 #define CONFIG_LCD_INFO_BELOW_LOGO
30 #define CONFIG_ATMEL_LCD
31 #define CONFIG_ATMEL_LCD_RGB565
32 /* board specific(not enough SRAM) */
33 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
34
35 /*
36  * BOOTP options
37  */
38 #define CONFIG_BOOTP_BOOTFILESIZE
39
40 /* SDRAM */
41 #define CONFIG_SYS_SDRAM_BASE           0x70000000
42 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
43
44 #define CONFIG_SYS_INIT_SP_ADDR \
45         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
46
47 /* NAND flash */
48 #ifdef CONFIG_CMD_NAND
49 #define CONFIG_SYS_MAX_NAND_DEVICE              1
50 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
51 #define CONFIG_SYS_NAND_DBW_8
52 /* our ALE is AD21 */
53 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
54 /* our CLE is AD22 */
55 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
56 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
57 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
58
59 #endif
60
61 /* Ethernet */
62 #define CONFIG_RESET_PHY_R
63 #define CONFIG_AT91_WANTS_COMMON_PHY
64
65 #ifdef CONFIG_NAND_BOOT
66 /* bootstrap + u-boot + env in nandflash */
67
68 #define CONFIG_BOOTCOMMAND                                              \
69         "nand read 0x70000000 0x200000 0x300000;"                       \
70         "bootm 0x70000000"
71 #elif CONFIG_SD_BOOT
72 /* bootstrap + u-boot + env + linux in mmc */
73
74 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x71000000 dtb; " \
75                                 "fatload mmc 0:1 0x72000000 zImage; " \
76                                 "bootz 0x72000000 - 0x71000000"
77 #endif
78
79 /* Defines for SPL */
80 #define CONFIG_SPL_MAX_SIZE             0x010000
81 #define CONFIG_SPL_STACK                0x310000
82
83 #define CONFIG_SYS_MONITOR_LEN          0x80000
84
85 #ifdef CONFIG_SD_BOOT
86
87 #define CONFIG_SPL_BSS_START_ADDR       0x70000000
88 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000
89 #define CONFIG_SYS_SPL_MALLOC_START     0x70080000
90 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00080000
91
92 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
93
94 #elif CONFIG_NAND_BOOT
95 #define CONFIG_SPL_NAND_SOFTECC
96 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
97 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
98 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
99
100 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
101 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
102 #define CONFIG_SYS_NAND_PAGE_COUNT      64
103 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
104 #define CONFIG_SYS_NAND_ECCSIZE         256
105 #define CONFIG_SYS_NAND_ECCBYTES        3
106 #define CONFIG_SYS_NAND_OOBSIZE         64
107 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
108                                           48, 49, 50, 51, 52, 53, 54, 55, \
109                                           56, 57, 58, 59, 60, 61, 62, 63, }
110 #endif
111
112 #define CONFIG_SPL_ATMEL_SIZE
113 #define CONFIG_SYS_MASTER_CLOCK         132096000
114 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
115 #define CONFIG_SYS_MCKR                 0x1301
116 #define CONFIG_SYS_MCKR_CSS             0x1302
117
118 #endif