include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #if (CONFIG_SYS_BOARD_VERSION == 5)
  17 #define CONFIG_MXC_UART_BASE    UART2_BASE
  18 #define CONSOLE_DEV     "ttymxc1"
  19 #elif (CONFIG_SYS_BOARD_VERSION == 6)
  20 #define CONFIG_MXC_UART_BASE    UART1_BASE
  21 #define CONSOLE_DEV     "ttymxc0"
  22 #endif
  23
  24 /* Framebuffer */
  25 #define CONFIG_SYS_LDB_CLOCK    28341000
  26
  27 #include "mx6_common.h"
  28
  29
  30 /* MMC Configs */
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  32
  33 #define CONFIG_FEC_MXC_PHYADDR          0
  34
  35 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  36
  37 #ifdef CONFIG_IMX_HAB
  38 #define HAB_EXTRA_SETTINGS \
  39         "hab_check_addr=" \
  40                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
  41                         "true;" \
  42                 "else " \
  43                         "echo \"HAB checks ${hab_check_filetype} " \
  44                         "failed!\"; " \
  45                         "false; " \
  46                 "fi;\0" \
  47         "hab_check_file_fit=" \
  48                 "if env exists enable_hab_check && test " \
  49                         "${enable_hab_check} -eq 1 ; then " \
  50                         "setenv hab_check_filetype \"FIT file on SD card " \
  51                         "or eMMC\";" \
  52                         "env set check_addr ${fit_addr_r};" \
  53                         "run hab_check_addr;" \
  54                 "else " \
  55                         "true; "\
  56                 "fi;\0" \
  57         "hab_check_file_bootscript=" \
  58                 "if env exists enable_hab_check && test " \
  59                         "${enable_hab_check} -eq 1 ; then " \
  60                         "setenv hab_check_filetype \"Bootscript file\";" \
  61                         "env set check_addr ${loadaddr};" \
  62                         "run hab_check_addr;" \
  63                 "else " \
  64                         "true; "\
  65                 "fi;\0" \
  66         "hab_check_flash_fit=" \
  67                 "if env exists enable_hab_check && test " \
  68                         "${enable_hab_check} -eq 1 ; then " \
  69                         "setenv hab_check_filetype \"FIT files on flash\";" \
  70                         "env set check_addr ${fit_addr_r};" \
  71                         "run hab_check_addr;" \
  72                 "else " \
  73                         "true; "\
  74                 "fi;\0" \
  75         "enable_hab_check=1\0"
  76 #else
  77 #define HAB_EXTRA_SETTINGS \
  78         "hab_check_addr=echo HAB check addr always returns " \
  79                 "true;true\0" \
  80         "hab_check_file_fit=echo HAB check FIT file always returns " \
  81                 "true;true\0" \
  82         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
  83                 "true;true\0" \
  84         "hab_check_file_bootscript=echo HAB check bootscript always " \
  85                 "returns true;true\0" \
  86         "enable_hab_check=0\0"
  87 #endif
  88
  89 #if (CONFIG_SYS_BOARD_VERSION == 5)
  90 #define EXTRA_ENV_BOARD_SETTINGS \
  91         "dead=while true; do; " \
  92                 "led led_red on; sleep 1;" \
  93                 "led led_red off; sleep 1;" \
  94         "done\0"
  95 #elif (CONFIG_SYS_BOARD_VERSION == 6)
  96 #define EXTRA_ENV_BOARD_SETTINGS \
  97         "dead=while true; do; " \
  98                 "led led_red on; led led_red2 on; sleep 1;" \
  99                 "led led_red off; led led_red2 off;; sleep 1;" \
 100         "done\0"
 101 #endif
 102
 103 #define CONFIG_EXTRA_ENV_SETTINGS \
 104         "disable_giga=yes\0" \
 105         "usb_pgood_delay=2000\0" \
 106         "nor_bootdelay=-2\0" \
 107         "script=u-boot.scr\0" \
 108         "loadaddr=0x12000000\0" \
 109         "fit_addr_r=0x14000000\0" \
 110         "uboot_sz=d0000\0" \
 111         "panel=lb07wv8\0" \
 112         "splashpos=m,m\0" \
 113         "console=" CONSOLE_DEV "\0" \
 114         "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
 115         "mtdids=nor0=spi0.0\0" \
 116         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 117                 "-(ubi-nor)\0" \
 118         "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
 119         "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
 120         "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
 121         "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
 122         "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
 123         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 124                 "bootmode=${bootmode} rng_core.default_quality=1000 " \
 125                 "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
 126         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 127         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
 128         "get_env=mw ${loadaddr} 0 0x20000;" \
 129                 "mmc rescan;" \
 130                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 131                 "env import -t ${loadaddr}\0" \
 132         "default_env=gpio set wp_spi_nor.gpio-hog;" \
 133                 "sf probe;" \
 134                 "sf protect unlock 0 0x1000000;" \
 135                 "mw ${loadaddr} 0 0x20000;" \
 136                 "env export -t ${loadaddr} serial# ethaddr " \
 137                 "board_type panel;" \
 138                 "env default -a;" \
 139                 "env import -t ${loadaddr}\0" \
 140         "loadbootscript=" \
 141                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 142                 "${script};\0" \
 143         "loadbootscriptUSB=" \
 144                 "ext4load usb 0 ${loadaddr} ${script};\0" \
 145         "loadbootscriptUSBf=" \
 146                 "fatload usb 0 ${loadaddr} ${script};\0" \
 147         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
 148                 "source \0" \
 149         "bootscript=echo Running bootscript from mmc ...; " \
 150                 "source \0" \
 151         "mmcpart=1\0" \
 152         "mmcdev=0\0" \
 153         "emmcpart=1\0" \
 154         "emmcdev=1\0" \
 155         "sysnum=1\0" \
 156         "rescue_sysnum=0\0" \
 157         "rreason=18\0" \
 158         "mainboot=echo Booting from eMMC ...; " \
 159                 "run mainargs addmtd addmisc;" \
 160                 "run boot_board_type;" \
 161                 "bootm ${fit_addr_r}\0" \
 162         "mainargs=setenv bootargs console=${console},${baudrate} " \
 163                 "root=${emmcroot} rootfstype=ext4\0 " \
 164         "main_load_fit=run mk_fitfile_path; " \
 165                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 166                 "${fit_file}; " \
 167                 "imi ${fit_addr_r}\0 " \
 168         "rescue_load_fit=run mk_rescue_fitfile_path; " \
 169                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 170                 "${rescue_fit_file}; " \
 171                 "imi ${fit_addr_r}\0" \
 172         "main_load_pubkey=run mk_pubkey_path; " \
 173                 "setenv hab_check_filetype \"PCR.pem\";" \
 174                 "env set check_addr ${loadaddr};" \
 175                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 176                 "${pubkey}\0" \
 177         "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 178                 "setenv hab_check_filetype \"PCR.pem\";" \
 179                 "env set check_addr ${loadaddr};" \
 180                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 181                 "${pubkey}\0" \
 182         "mainRargs=setenv bootargs console=${console},${baudrate} " \
 183                 "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
 184         "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
 185         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 186                 "root=${mmcroot}\0" \
 187         "mmcRargs=setenv bootargs console=${console},${baudrate} " \
 188                 "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
 189         "mmcboot=echo Booting from mmc ...; " \
 190                 "run mmcargs addmtd addmisc;" \
 191                 "run boot_board_type;" \
 192                 "bootm ${fit_addr_r}\0" \
 193         "mmc_load_fit=run mk_fitfile_path; " \
 194                 "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 195                 "${fit_file}\0" \
 196                 "imi ${fit_addr_r}\0" \
 197         "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
 198                 "ext4load mmc ${mmcdev}:${mmcpart} " \
 199                 "${fit_addr_r} ${rescue_fit_file}\0" \
 200                 "imi ${fit_addr_r}\0" \
 201         "mmc_load_uboot=run mk_uboot_path; " \
 202                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 203                 "${uboot}\0" \
 204         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 205                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 206                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 207                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 208                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 209                 "sf write ${loadaddr} 400 ${filesize};" \
 210                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 211                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 212         "mmc_load_pubkey=run mk_pubkey_path; " \
 213                 "setenv hab_check_filetype \"PCR.pem\";" \
 214                 "env set check_addr ${loadaddr};" \
 215                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 216                 "${pubkey}\0" \
 217         "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 218                 "setenv hab_check_filetype \"PCR.pem\";" \
 219                 "env set check_addr ${loadaddr};" \
 220                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 221                 "${pubkey}\0" \
 222         "rescueboot=echo Booting rescue system ...; " \
 223                 "run addmtd addmisc;" \
 224                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 225                 "run boot_board_type;" \
 226                 "if bootm ${fit_addr_r}; then ; " \
 227                 "else " \
 228                         "run dead; " \
 229                 "fi; \0" \
 230         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 231                 "\\\\${bootargs} " \
 232                 "rescueReason=$rreason\0 " \
 233         "usb_load_fit=run mk_fitfile_path; " \
 234                 "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 235         "usb_load_fitf=run mk_fitfile_path; " \
 236                 "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 237         "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
 238                 "ext4load usb 0 ${fit_addr_r} " \
 239                 "${rescue_fit_file}\0" \
 240         "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
 241                 "fatload usb 0 ${fit_addr_r} " \
 242                 "${rescue_fit_file}\0" \
 243         "usb_load_pubkey=run mk_pubkey_path; " \
 244                 "setenv hab_check_filetype \"PCR.pem\";" \
 245                 "env set check_addr ${loadaddr};" \
 246                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 247         "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 248                 "setenv hab_check_filetype \"PCR.pem\";" \
 249                 "env set check_addr ${loadaddr};" \
 250                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 251         "usb_load_pubkeyf=run mk_pubkey_path; " \
 252                 "setenv hab_check_filetype \"PCR.pem\";" \
 253                 "env set check_addr ${loadaddr};" \
 254                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 255         "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
 256                 "setenv hab_check_filetype \"PCR.pem\";" \
 257                 "env set check_addr ${loadaddr};" \
 258                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 259         "usbroot=/dev/sda1 rootwait rw\0" \
 260         "usbboot=echo Booting from usb-stick ...; " \
 261                 "run usbargs addmtd addmisc;" \
 262                 "run boot_board_type;" \
 263                 "bootm ${fit_addr_r}\0" \
 264         "usbargs=setenv bootargs console=${console},${baudrate} " \
 265                 "root=${usbroot}\0" \
 266         "usbRargs=setenv bootargs console=${console},${baudrate} " \
 267                 "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
 268         "mmc_rescue_boot=" \
 269                 "run r_reason_syserr;" \
 270                 "if run mmc_rescue_load_pubkey hab_check_addr " \
 271                 "mmc_rescue_load_fit hab_check_file_fit; then " \
 272                         "run mmcRargs; run rescueboot; " \
 273                 "else " \
 274                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 275                         "run dead; " \
 276                 "fi;\0" \
 277         "main_rescue_boot=" \
 278                 "if run main_load_pubkey hab_check_addr " \
 279                 "main_load_fit hab_check_flash_fit; then " \
 280                         "if run mainboot; then ; " \
 281                         "else " \
 282                                 "run r_reason_syserr;" \
 283                                 "if run rescue_load_pubkey hab_check_addr " \
 284                                 "rescue_load_fit hab_check_file_fit; then " \
 285                                         "run mainRargs; run rescueboot; " \
 286                                 "else " \
 287                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 288                                         "run dead; " \
 289                                 "fi; " \
 290                         "fi; " \
 291                 "else " \
 292                         "run r_reason_syserr;" \
 293                         "if run rescue_load_pubkey hab_check_addr " \
 294                         "rescue_load_fit hab_check_file_fit; then " \
 295                                 "run mainRargs; run rescueboot; " \
 296                         "else " \
 297                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 298                                 "run dead; " \
 299                         "fi; " \
 300                 "fi;\0" \
 301         "usb_mmc_rescue_boot=" \
 302                 "usb start;" \
 303                 "if usb storage; then " \
 304                         "if run loadbootscriptUSB " \
 305                                 "hab_check_file_bootscript;" \
 306                                 "then run bootscriptUSB; " \
 307                         "fi; " \
 308                         "if run loadbootscriptUSBf " \
 309                                 "hab_check_file_bootscript;" \
 310                                 "then run bootscriptUSB; " \
 311                         "fi; " \
 312                         "if run usb_load_pubkey hab_check_addr " \
 313                         "usb_load_fit hab_check_file_fit; then " \
 314                                 "run usbboot; " \
 315                         "fi; " \
 316                         "if run usb_load_pubkeyf hab_check_addr " \
 317                         "usb_load_fitf hab_check_file_fit; then " \
 318                                 "run usbboot; " \
 319                         "fi; "\
 320                         "if run usb_rescue_load_pubkey hab_check_addr " \
 321                         "usb_load_rescuefit hab_check_file_fit; then " \
 322                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 323                         "fi; " \
 324                         "if run usb_rescue_load_pubkeyf hab_check_addr " \
 325                         "usb_load_rescuefitf hab_check_file_fit; then " \
 326                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 327                         "fi; " \
 328                         "run mmc_rescue_boot;" \
 329                 "fi; "\
 330                 "run mmc_rescue_boot;\0" \
 331         "rescue_xload_boot=" \
 332                 "run r_reason_syserr;" \
 333                 "if test ${bootmode} -ne 0 ; then " \
 334                         "mmc dev ${mmcdev};" \
 335                         "if mmc rescan; then " \
 336                                 "if run mmc_rescue_load_pubkey " \
 337                                 "hab_check_addr " \
 338                                 "mmc_rescue_load_fit " \
 339                                 "hab_check_file_fit; then " \
 340                                         "run mmcRargs; run rescueboot; " \
 341                                 "else " \
 342                                         "usb start;" \
 343                                         "if usb storage; then " \
 344                                                 "if run usb_rescue_load_pubkey " \
 345                                                 "hab_check_addr " \
 346                                                 "usb_load_rescuefit " \
 347                                                 "hab_check_file_fit; then " \
 348                                                         "run usbRargs; run rescueboot;" \
 349                                                 "fi; " \
 350                                                 "if run usb_rescue_load_pubkeyf " \
 351                                                 "hab_check_addr " \
 352                                                 "usb_load_rescuefitf " \
 353                                                 "hab_check_file_fit; then " \
 354                                                         "run usbRargs; run rescueboot;" \
 355                                                 "fi; " \
 356                                         "fi;" \
 357                                 "fi;" \
 358                                 "echo RESCUE SYSTEM ON SD OR " \
 359                                         "USB BOOT FAILURE;" \
 360                                 "run dead; " \
 361                         "else " \
 362                                 "usb start;" \
 363                                 "if usb storage; then " \
 364                                         "if run usb_rescue_load_pubkey " \
 365                                         "hab_check_addr " \
 366                                         "usb_load_rescuefit " \
 367                                         "hab_check_file_fit; then " \
 368                                                 "run usbRargs; run rescueboot;" \
 369                                         "fi; " \
 370                                         "if run usb_rescue_load_pubkeyf " \
 371                                         "hab_check_addr " \
 372                                         "usb_load_rescuefitf " \
 373                                         "hab_check_file_fit; then " \
 374                                                 "run usbRargs; run rescueboot;" \
 375                                         "fi; " \
 376                                 "fi;" \
 377                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 378                                 "run dead; " \
 379                         "fi; " \
 380                 "else "\
 381                         "if run rescue_load_pubkey hab_check_addr " \
 382                         "rescue_load_fit hab_check_file_fit; then " \
 383                                 "run mainRargs; run rescueboot; " \
 384                         "else " \
 385                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 386                                 "run dead; " \
 387                         "fi; " \
 388                 "fi;\0" \
 389         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 390                 "mmc dev ${mmcdev};" \
 391                 "if mmc rescan; then " \
 392                         "if run loadbootscript hab_check_file_bootscript;" \
 393                                 "then run bootscript; " \
 394                         "fi; " \
 395                         "if run mmc_load_pubkey hab_check_addr " \
 396                         "mmc_load_fit hab_check_file_fit; then " \
 397                                 "if run mmcboot; then ; " \
 398                                 "else " \
 399                                         "run mmc_rescue_boot;" \
 400                                 "fi; " \
 401                         "else " \
 402                                 "run usb_mmc_rescue_boot;" \
 403                         "fi; " \
 404                 "else " \
 405                         "run usb_mmc_rescue_boot;" \
 406                 "fi; " \
 407         "else "\
 408                 "run main_rescue_boot;" \
 409         "fi; \0"\
 410         HAB_EXTRA_SETTINGS \
 411         EXTRA_ENV_BOARD_SETTINGS
 412
 413 /* Physical Memory Map */
 414 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 415
 416 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 417 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 418 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 419
 420 #define CONFIG_SYS_INIT_SP_OFFSET \
 421         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 422 #define CONFIG_SYS_INIT_SP_ADDR \
 423         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 424
 425 #define CONFIG_SYS_FSL_USDHC_NUM        2
 426
 427 /* DMA stuff, needed for GPMI/MXS NAND support */
 428
 429 /* USB Configs */
 430 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 431 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 432 #define CONFIG_MXC_USB_FLAGS    0
 433
 434 /* UBI support */
 435
 436 /* Framebuffer */
 437 /* check this console not needed, after test remove it */
 438 #define CONFIG_IMX_VIDEO_SKIP
 439
 440 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 441
 442 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
 443                 "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
 444
 445 #endif                         /* __ARISTAINETOS2_CONFIG_H */