include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #undef CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17 #define CONFIG_MACH_TYPE                4886
  18
  19 #define CONFIG_SYS_GENERIC_BOARD
  20
  21 #include <asm/arch/imx-regs.h>
  22 #include <asm/mach-imx/gpio.h>
  23
  24 #ifdef CONFIG_SPL
  25 #include "imx6_spl.h"
  26 #endif
  27
  28 #define CONFIG_CMDLINE_TAG
  29 #define CONFIG_SETUP_MEMORY_TAGS
  30 #define CONFIG_INITRD_TAG
  31 #define CONFIG_REVISION_TAG
  32 #define CONFIG_SERIAL_TAG
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  36
  37 #define CONFIG_MISC_INIT_R
  38
  39 #define CONFIG_MXC_UART
  40 #define CONFIG_MXC_UART_BASE            UART1_BASE
  41
  42 /* Make the HW version stuff available in U-Boot env */
  43 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  44 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  46
  47 /* I2C Configs */
  48 #define CONFIG_SYS_I2C
  49 #define CONFIG_SYS_I2C_MXC
  50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  51 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_I2C_SPEED            100000
  54
  55 /* OCOTP Configs */
  56 #ifdef CONFIG_CMD_FUSE
  57 #define CONFIG_MXC_OCOTP
  58 #endif
  59
  60 /* MMC Configs */
  61 #define CONFIG_FSL_ESDHC
  62 #define CONFIG_FSL_USDHC
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  64 #define CONFIG_SYS_FSL_USDHC_NUM        3
  65
  66 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  67 #define CONFIG_BOUNCE_BUFFER
  68
  69 /*
  70  * SATA Configs
  71  */
  72 #ifdef CONFIG_CMD_SATA
  73 #define CONFIG_DWC_AHSATA
  74 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  75 #define CONFIG_DWC_AHSATA_PORT_ID       0
  76 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  77 #define CONFIG_LBA48
  78 #define CONFIG_LIBATA
  79 #endif
  80
  81 /* Network */
  82 #define CONFIG_FEC_MXC
  83 #define CONFIG_MII
  84 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  85 #define CONFIG_FEC_XCV_TYPE             RGMII
  86 #define CONFIG_ETHPRIME                 "FEC"
  87 #define CONFIG_FEC_MXC_PHYADDR          6
  88 #define CONFIG_IP_DEFRAG
  89 #define CONFIG_TFTP_BLOCKSIZE           4096
  90 #define CONFIG_TFTP_TSIZE
  91
  92 /* USB Configs */
  93 /* Host */
  94 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  95 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  96 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  97 #define CONFIG_MXC_USB_FLAGS            0
  98 /* Client */
  99 #define CONFIG_USBD_HS
 100
 101 #define CONFIG_USB_GADGET_MASS_STORAGE
 102 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 103 /* USB DFU */
 104 #define CONFIG_DFU_MMC
 105
 106 /* Miscellaneous commands */
 107 #define CONFIG_MXC_GPIO
 108
 109 /* Framebuffer and LCD */
 110 #define CONFIG_VIDEO_IPUV3
 111 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 112 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 113 #define CONFIG_VIDEO_BMP_RLE8
 114 #define CONFIG_SPLASH_SCREEN
 115 #define CONFIG_SPLASH_SCREEN_ALIGN
 116 #define CONFIG_BMP_16BPP
 117 #define CONFIG_VIDEO_LOGO
 118 #define CONFIG_VIDEO_BMP_LOGO
 119 #define CONFIG_CONSOLE_MUX
 120 #define CONFIG_IMX_HDMI
 121 #define CONFIG_IMX_VIDEO_SKIP
 122
 123 /* allow to overwrite serial and ethaddr */
 124 #define CONFIG_ENV_OVERWRITE
 125 #define CONFIG_CONS_INDEX               1
 126
 127 /* Command definition */
 128 #undef CONFIG_CMD_LOADB
 129 #undef CONFIG_CMD_LOADS
 130 #undef CONFIG_CMD_NFS
 131 #undef CONFIG_CMD_FLASH
 132
 133 #undef CONFIG_IPADDR
 134 #define CONFIG_IPADDR                   192.168.10.2
 135 #define CONFIG_NETMASK                  255.255.255.0
 136 #undef CONFIG_SERVERIP
 137 #define CONFIG_SERVERIP                 192.168.10.1
 138
 139 #define CONFIG_LOADADDR                 0x12000000
 140 #define CONFIG_SYS_TEXT_BASE            0x17800000
 141
 142 #ifdef CONFIG_CMD_SATA
 143 #define CONFIG_DRIVE_SATA "sata "
 144 #else
 145 #define CONFIG_DRIVE_SATA
 146 #endif
 147
 148 #ifdef CONFIG_CMD_MMC
 149 #define CONFIG_DRIVE_MMC "mmc "
 150 #else
 151 #define CONFIG_DRIVE_MMC
 152 #endif
 153
 154 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 155
 156 #define DFU_ALT_EMMC_INFO \
 157         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 158         "boot part 0 1;" \
 159         "rootfs part 0 2;" \
 160         "uImage fat 0 1;" \
 161         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 162         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 163
 164 #define EMMC_BOOTCMD \
 165         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 166                 "rootwait\0" \
 167         "emmcboot=run setup; " \
 168                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 169                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 170                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 171                 "${boot_file} && run fdt_fixup && " \
 172                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 173         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 174                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 175
 176 #define MEM_LAYOUT_ENV_SETTINGS \
 177         "bootm_size=0x20000000\0" \
 178         "fdt_addr_r=0x12000000\0" \
 179         "fdt_high=0xffffffff\0" \
 180         "initrd_high=0xffffffff\0" \
 181         "kernel_addr_r=0x11000000\0" \
 182         "ramdisk_addr_r=0x12100000\0"
 183
 184 #define NFS_BOOTCMD \
 185         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 186         "nfsboot=run setup; " \
 187                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 188                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 189                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 190                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 191         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 192                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 193
 194 #define SD_BOOTCMD                                              \
 195         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 196                 "rootwait\0" \
 197         "sdboot=run setup; " \
 198                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 199                 "${vidargs}; echo Booting from SD card; " \
 200                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 201                 "${boot_file} && run fdt_fixup && " \
 202                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 203         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 204                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 205
 206 #define USB_BOOTCMD \
 207         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 208                 "rootwait\0" \
 209         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 210                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 211                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 212                 "${boot_file} && run fdt_fixup && " \
 213                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 214         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 215                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 216
 217 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 218 #define FDT_FILE "imx6q-apalis-eval.dtb"
 219 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 220 #else
 221 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 222 #endif
 223 #define CONFIG_EXTRA_ENV_SETTINGS \
 224         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 225                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 226                 "usb start ;" \
 227                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 228         "boot_file=uImage\0" \
 229         "console=ttymxc0\0" \
 230         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 231         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 232         EMMC_BOOTCMD \
 233         "fdt_file=" FDT_FILE "\0" \
 234         "fdt_fixup=;\0" \
 235         MEM_LAYOUT_ENV_SETTINGS \
 236         NFS_BOOTCMD \
 237         SD_BOOTCMD \
 238         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 239                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 240                 "flash_eth.img && source ${loadaddr}\0" \
 241         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 242                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 243                 "source ${loadaddr}\0" \
 244         "setup=setenv setupargs fec_mac=${ethaddr} " \
 245                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 246                 "console=${console},${baudrate}n8\0 " \
 247         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 248         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 249                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 250                 "source ${loadaddr}\0" \
 251         "splashpos=m,m\0" \
 252         "vidargs=mxc_hdmi.only_cea=1 " \
 253                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 254                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 255                 "fbmem=32M\0 "
 256
 257 /* Miscellaneous configurable options */
 258 #define CONFIG_SYS_LONGHELP
 259 #define CONFIG_AUTO_COMPLETE
 260 #undef CONFIG_SYS_CBSIZE
 261 #define CONFIG_SYS_CBSIZE               1024
 262 #undef CONFIG_SYS_MAXARGS
 263 #define CONFIG_SYS_MAXARGS              48
 264
 265 #define CONFIG_SYS_ALT_MEMTEST
 266 #define CONFIG_SYS_MEMTEST_START        0x10000000
 267 #define CONFIG_SYS_MEMTEST_END          0x10010000
 268 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 269
 270 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 271
 272 #define CONFIG_CMDLINE_EDITING
 273
 274 /* Physical Memory Map */
 275 #define CONFIG_NR_DRAM_BANKS            1
 276 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 277
 278 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 279 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 280 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 281
 282 #define CONFIG_SYS_INIT_SP_OFFSET \
 283         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 284 #define CONFIG_SYS_INIT_SP_ADDR \
 285         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 286
 287 /* environment organization */
 288
 289 #define CONFIG_ENV_SIZE                 (8 * 1024)
 290
 291 #if defined(CONFIG_ENV_IS_IN_MMC)
 292 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 293 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 294                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 295 #define CONFIG_SYS_MMC_ENV_DEV          0
 296 #define CONFIG_SYS_MMC_ENV_PART         1
 297 #endif
 298
 299 #define CONFIG_OF_SYSTEM_SETUP
 300
 301 #define CONFIG_CMD_TIME
 302
 303 #define CONFIG_SUPPORT_RAW_INITRD
 304
 305 #endif  /* __CONFIG_H */