include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #undef CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17 #define CONFIG_MACH_TYPE                4886
  18
  19 #define CONFIG_SYS_GENERIC_BOARD
  20
  21 #include <asm/arch/imx-regs.h>
  22 #include <asm/mach-imx/gpio.h>
  23
  24 #ifdef CONFIG_SPL
  25 #include "imx6_spl.h"
  26 #endif
  27
  28 #define CONFIG_CMDLINE_TAG
  29 #define CONFIG_SETUP_MEMORY_TAGS
  30 #define CONFIG_INITRD_TAG
  31 #define CONFIG_REVISION_TAG
  32 #define CONFIG_SERIAL_TAG
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  36
  37 #define CONFIG_MISC_INIT_R
  38
  39 #define CONFIG_MXC_UART
  40 #define CONFIG_MXC_UART_BASE            UART1_BASE
  41
  42 /* Make the HW version stuff available in U-Boot env */
  43 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  45
  46 /* I2C Configs */
  47 #define CONFIG_SYS_I2C
  48 #define CONFIG_SYS_I2C_MXC
  49 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  50 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  51 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  52 #define CONFIG_SYS_I2C_SPEED            100000
  53
  54 /* OCOTP Configs */
  55 #ifdef CONFIG_CMD_FUSE
  56 #define CONFIG_MXC_OCOTP
  57 #endif
  58
  59 /* MMC Configs */
  60 #define CONFIG_FSL_ESDHC
  61 #define CONFIG_FSL_USDHC
  62 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  63 #define CONFIG_SYS_FSL_USDHC_NUM        3
  64
  65 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  66 #define CONFIG_BOUNCE_BUFFER
  67
  68 /*
  69  * SATA Configs
  70  */
  71 #ifdef CONFIG_CMD_SATA
  72 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  73 #define CONFIG_DWC_AHSATA_PORT_ID       0
  74 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  75 #define CONFIG_LBA48
  76 #endif
  77
  78 /* Network */
  79 #define CONFIG_FEC_MXC
  80 #define CONFIG_MII
  81 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  82 #define CONFIG_FEC_XCV_TYPE             RGMII
  83 #define CONFIG_ETHPRIME                 "FEC"
  84 #define CONFIG_FEC_MXC_PHYADDR          6
  85 #define CONFIG_IP_DEFRAG
  86 #define CONFIG_TFTP_BLOCKSIZE           4096
  87 #define CONFIG_TFTP_TSIZE
  88
  89 /* USB Configs */
  90 /* Host */
  91 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  92 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  93 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  94 #define CONFIG_MXC_USB_FLAGS            0
  95 /* Client */
  96 #define CONFIG_USBD_HS
  97
  98 #define CONFIG_USB_GADGET_MASS_STORAGE
  99 /* USB DFU */
 100 #define CONFIG_DFU_MMC
 101
 102 /* Miscellaneous commands */
 103
 104 /* Framebuffer and LCD */
 105 #define CONFIG_VIDEO_IPUV3
 106 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 107 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 108 #define CONFIG_VIDEO_BMP_RLE8
 109 #define CONFIG_SPLASH_SCREEN
 110 #define CONFIG_SPLASH_SCREEN_ALIGN
 111 #define CONFIG_BMP_16BPP
 112 #define CONFIG_VIDEO_LOGO
 113 #define CONFIG_VIDEO_BMP_LOGO
 114 #define CONFIG_CONSOLE_MUX
 115 #define CONFIG_IMX_HDMI
 116 #define CONFIG_IMX_VIDEO_SKIP
 117
 118 /* allow to overwrite serial and ethaddr */
 119 #define CONFIG_ENV_OVERWRITE
 120
 121 /* Command definition */
 122 #undef CONFIG_CMD_LOADB
 123 #undef CONFIG_CMD_LOADS
 124 #undef CONFIG_CMD_NFS
 125 #undef CONFIG_CMD_FLASH
 126
 127 #undef CONFIG_IPADDR
 128 #define CONFIG_IPADDR                   192.168.10.2
 129 #define CONFIG_NETMASK                  255.255.255.0
 130 #undef CONFIG_SERVERIP
 131 #define CONFIG_SERVERIP                 192.168.10.1
 132
 133 #define CONFIG_LOADADDR                 0x12000000
 134
 135 #ifdef CONFIG_CMD_SATA
 136 #define CONFIG_DRIVE_SATA "sata "
 137 #else
 138 #define CONFIG_DRIVE_SATA
 139 #endif
 140
 141 #ifdef CONFIG_CMD_MMC
 142 #define CONFIG_DRIVE_MMC "mmc "
 143 #else
 144 #define CONFIG_DRIVE_MMC
 145 #endif
 146
 147 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 148
 149 #define DFU_ALT_EMMC_INFO \
 150         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 151         "boot part 0 1;" \
 152         "rootfs part 0 2;" \
 153         "uImage fat 0 1;" \
 154         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 155         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 156
 157 #define EMMC_BOOTCMD \
 158         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 159                 "rootwait\0" \
 160         "emmcboot=run setup; " \
 161                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 162                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 163                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 164                 "${boot_file} && run fdt_fixup && " \
 165                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 166         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 167                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 168
 169 #define MEM_LAYOUT_ENV_SETTINGS \
 170         "bootm_size=0x20000000\0" \
 171         "fdt_addr_r=0x12000000\0" \
 172         "fdt_high=0xffffffff\0" \
 173         "initrd_high=0xffffffff\0" \
 174         "kernel_addr_r=0x11000000\0" \
 175         "ramdisk_addr_r=0x12100000\0"
 176
 177 #define NFS_BOOTCMD \
 178         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 179         "nfsboot=run setup; " \
 180                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 181                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 182                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 183                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 184         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 185                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 186
 187 #define SD_BOOTCMD                                              \
 188         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 189                 "rootwait\0" \
 190         "sdboot=run setup; " \
 191                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 192                 "${vidargs}; echo Booting from SD card; " \
 193                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 194                 "${boot_file} && run fdt_fixup && " \
 195                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 196         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 197                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 198
 199 #define USB_BOOTCMD \
 200         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 201                 "rootwait\0" \
 202         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 203                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 204                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 205                 "${boot_file} && run fdt_fixup && " \
 206                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 207         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 208                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 209
 210 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 211 #define FDT_FILE "imx6q-apalis-eval.dtb"
 212 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 213 #else
 214 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 215 #endif
 216 #define CONFIG_EXTRA_ENV_SETTINGS \
 217         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 218                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 219                 "usb start ;" \
 220                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 221         "boot_file=uImage\0" \
 222         "console=ttymxc0\0" \
 223         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 224         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 225         EMMC_BOOTCMD \
 226         "fdt_file=" FDT_FILE "\0" \
 227         "fdt_fixup=;\0" \
 228         MEM_LAYOUT_ENV_SETTINGS \
 229         NFS_BOOTCMD \
 230         SD_BOOTCMD \
 231         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 232                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 233                 "flash_eth.img && source ${loadaddr}\0" \
 234         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 235                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 236                 "source ${loadaddr}\0" \
 237         "setup=setenv setupargs fec_mac=${ethaddr} " \
 238                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 239                 "console=${console},${baudrate}n8\0 " \
 240         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 241         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 242                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 243                 "source ${loadaddr}\0" \
 244         "splashpos=m,m\0" \
 245         "vidargs=mxc_hdmi.only_cea=1 " \
 246                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 247                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 248                 "fbmem=32M\0 "
 249
 250 /* Miscellaneous configurable options */
 251 #undef CONFIG_SYS_CBSIZE
 252 #define CONFIG_SYS_CBSIZE               1024
 253 #undef CONFIG_SYS_MAXARGS
 254 #define CONFIG_SYS_MAXARGS              48
 255
 256 #define CONFIG_SYS_ALT_MEMTEST
 257 #define CONFIG_SYS_MEMTEST_START        0x10000000
 258 #define CONFIG_SYS_MEMTEST_END          0x10010000
 259 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 260
 261 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 262
 263 /* Physical Memory Map */
 264 #define CONFIG_NR_DRAM_BANKS            1
 265 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 266
 267 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 268 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 269 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 270
 271 #define CONFIG_SYS_INIT_SP_OFFSET \
 272         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 273 #define CONFIG_SYS_INIT_SP_ADDR \
 274         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 275
 276 /* environment organization */
 277
 278 #define CONFIG_ENV_SIZE                 (8 * 1024)
 279
 280 #if defined(CONFIG_ENV_IS_IN_MMC)
 281 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 282 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 283                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 284 #define CONFIG_SYS_MMC_ENV_DEV          0
 285 #define CONFIG_SYS_MMC_ENV_PART         1
 286 #endif
 287
 288 #define CONFIG_OF_SYSTEM_SETUP
 289
 290 #define CONFIG_CMD_TIME
 291
 292 #endif  /* __CONFIG_H */