include/configs/apalis_imx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2015 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis iMX6
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #undef CONFIG_DISPLAY_BOARDINFO
  14
  15 #define CONFIG_MACH_TYPE                4886
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/mach-imx/gpio.h>
  19
  20 #ifdef CONFIG_SPL
  21 #include "imx6_spl.h"
  22 #endif
  23
  24 #define CONFIG_CMDLINE_TAG
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SERIAL_TAG
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  32
  33 #define CONFIG_MISC_INIT_R
  34
  35 #define CONFIG_MXC_UART
  36 #define CONFIG_MXC_UART_BASE            UART1_BASE
  37
  38 /* I2C Configs */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45
  46 /* OCOTP Configs */
  47 #ifdef CONFIG_CMD_FUSE
  48 #define CONFIG_MXC_OCOTP
  49 #endif
  50
  51 /* MMC Configs */
  52 #define CONFIG_FSL_USDHC
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  54 #define CONFIG_SYS_FSL_USDHC_NUM        3
  55
  56 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  57
  58 /*
  59  * SATA Configs
  60  */
  61 #ifdef CONFIG_CMD_SATA
  62 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  63 #define CONFIG_DWC_AHSATA_PORT_ID       0
  64 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  65 #define CONFIG_LBA48
  66 #endif
  67
  68 /* Network */
  69 #define CONFIG_FEC_MXC
  70 #define CONFIG_MII
  71 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  72 #define CONFIG_FEC_XCV_TYPE             RGMII
  73 #define CONFIG_ETHPRIME                 "FEC"
  74 #define CONFIG_FEC_MXC_PHYADDR          6
  75 #define CONFIG_IP_DEFRAG
  76 #define CONFIG_TFTP_BLOCKSIZE           4096
  77 #define CONFIG_TFTP_TSIZE
  78
  79 /* USB Configs */
  80 /* Host */
  81 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  82 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  83 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  84 #define CONFIG_MXC_USB_FLAGS            0
  85 /* Client */
  86 #define CONFIG_USBD_HS
  87
  88 #define CONFIG_USB_GADGET_MASS_STORAGE
  89 /* USB DFU */
  90 #define CONFIG_DFU_MMC
  91
  92 /* Miscellaneous commands */
  93
  94 /* Framebuffer and LCD */
  95 #define CONFIG_VIDEO_IPUV3
  96 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  97 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  98 #define CONFIG_VIDEO_BMP_RLE8
  99 #define CONFIG_SPLASH_SCREEN
 100 #define CONFIG_SPLASH_SCREEN_ALIGN
 101 #define CONFIG_BMP_16BPP
 102 #define CONFIG_VIDEO_LOGO
 103 #define CONFIG_VIDEO_BMP_LOGO
 104 #define CONFIG_CONSOLE_MUX
 105 #define CONFIG_IMX_HDMI
 106 #define CONFIG_IMX_VIDEO_SKIP
 107
 108 /* allow to overwrite serial and ethaddr */
 109 #define CONFIG_ENV_OVERWRITE
 110
 111 /* Command definition */
 112 #undef CONFIG_CMD_LOADB
 113 #undef CONFIG_CMD_LOADS
 114 #undef CONFIG_CMD_NFS
 115 #undef CONFIG_CMD_FLASH
 116
 117 #undef CONFIG_IPADDR
 118 #define CONFIG_IPADDR                   192.168.10.2
 119 #define CONFIG_NETMASK                  255.255.255.0
 120 #undef CONFIG_SERVERIP
 121 #define CONFIG_SERVERIP                 192.168.10.1
 122
 123 #define CONFIG_LOADADDR                 0x12000000
 124
 125 #ifdef CONFIG_CMD_SATA
 126 #define CONFIG_DRIVE_SATA "sata "
 127 #else
 128 #define CONFIG_DRIVE_SATA
 129 #endif
 130
 131 #ifdef CONFIG_CMD_MMC
 132 #define CONFIG_DRIVE_MMC "mmc "
 133 #else
 134 #define CONFIG_DRIVE_MMC
 135 #endif
 136
 137 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 138
 139 #define DFU_ALT_EMMC_INFO \
 140         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 141         "boot part 0 1;" \
 142         "rootfs part 0 2;" \
 143         "uImage fat 0 1;" \
 144         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 145         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 146
 147 #define EMMC_BOOTCMD \
 148         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 149                 "rootwait\0" \
 150         "emmcboot=run setup; " \
 151                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 152                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 153                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 154                 "${boot_file} && run fdt_fixup && " \
 155                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 156         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 157                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 158
 159 #define MEM_LAYOUT_ENV_SETTINGS \
 160         "bootm_size=0x20000000\0" \
 161         "fdt_addr_r=0x12000000\0" \
 162         "fdt_high=0xffffffff\0" \
 163         "initrd_high=0xffffffff\0" \
 164         "kernel_addr_r=0x11000000\0" \
 165         "ramdisk_addr_r=0x12100000\0"
 166
 167 #define NFS_BOOTCMD \
 168         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 169         "nfsboot=run setup; " \
 170                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 171                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 172                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 173                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 174         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 175                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 176
 177 #define SD_BOOTCMD                                              \
 178         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 179                 "rootwait\0" \
 180         "sdboot=run setup; " \
 181                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 182                 "${vidargs}; echo Booting from SD card; " \
 183                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 184                 "${boot_file} && run fdt_fixup && " \
 185                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 186         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 187                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 188
 189 #define USB_BOOTCMD \
 190         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 191                 "rootwait\0" \
 192         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 193                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 194                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 195                 "${boot_file} && run fdt_fixup && " \
 196                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 197         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 198                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 199
 200 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 201 #define FDT_FILE "imx6q-apalis-eval.dtb"
 202 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 203 #else
 204 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 205 #endif
 206 #define CONFIG_EXTRA_ENV_SETTINGS \
 207         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 208                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 209                 "usb start ;" \
 210                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 211         "boot_file=uImage\0" \
 212         "console=ttymxc0\0" \
 213         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 214         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 215         EMMC_BOOTCMD \
 216         "fdt_file=" FDT_FILE "\0" \
 217         "fdt_fixup=;\0" \
 218         MEM_LAYOUT_ENV_SETTINGS \
 219         NFS_BOOTCMD \
 220         SD_BOOTCMD \
 221         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 222                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 223                 "flash_eth.img && source ${loadaddr}\0" \
 224         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 225                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 226                 "source ${loadaddr}\0" \
 227         "setup=setenv setupargs fec_mac=${ethaddr} " \
 228                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 229                 "console=${console},${baudrate}n8\0 " \
 230         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 231         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 232                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 233                 "source ${loadaddr}\0" \
 234         "splashpos=m,m\0" \
 235         "vidargs=mxc_hdmi.only_cea=1 " \
 236                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 237                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 238                 "fbmem=32M\0 "
 239
 240 /* Miscellaneous configurable options */
 241 #undef CONFIG_SYS_CBSIZE
 242 #define CONFIG_SYS_CBSIZE               1024
 243 #undef CONFIG_SYS_MAXARGS
 244 #define CONFIG_SYS_MAXARGS              48
 245
 246 #define CONFIG_SYS_MEMTEST_START        0x10000000
 247 #define CONFIG_SYS_MEMTEST_END          0x10010000
 248 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 249
 250 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 251
 252 /* Physical Memory Map */
 253 #define CONFIG_NR_DRAM_BANKS            1
 254 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 255
 256 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 257 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 258 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 259
 260 #define CONFIG_SYS_INIT_SP_OFFSET \
 261         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 262 #define CONFIG_SYS_INIT_SP_ADDR \
 263         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 264
 265 /* environment organization */
 266
 267 #define CONFIG_ENV_SIZE                 (8 * 1024)
 268
 269 #if defined(CONFIG_ENV_IS_IN_MMC)
 270 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 271 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 272                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 273 #define CONFIG_SYS_MMC_ENV_DEV          0
 274 #define CONFIG_SYS_MMC_ENV_PART         1
 275 #endif
 276
 277 #define CONFIG_OF_SYSTEM_SETUP
 278
 279 #define CONFIG_CMD_TIME
 280
 281 #endif  /* __CONFIG_H */