Convert CONFIG_HOSTNAME et al to Kconfig
[platform/kernel/u-boot.git] / include / configs / apalis_imx6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2013-2019 Toradex, Inc.
4  *
5  * Configuration settings for the Toradex Apalis iMX6
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <linux/stringify.h>
12
13 #include "mx6_common.h"
14
15 #include <asm/arch/imx-regs.h>
16 #include <asm/mach-imx/gpio.h>
17
18 #define CONFIG_MXC_UART_BASE            UART1_BASE
19
20 /* MMC Configs */
21 #define CFG_SYS_FSL_ESDHC_ADDR  0
22 #define CFG_SYS_FSL_USDHC_NUM   3
23
24 /* Network */
25 #define PHY_ANEG_TIMEOUT                15000 /* PHY needs longer aneg time */
26
27 /* USB Configs */
28 /* Host */
29 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
30 #define CONFIG_MXC_USB_FLAGS            0
31 /* Client */
32 #define CONFIG_USBD_HS
33
34 /* Framebuffer and LCD */
35
36 /* Command definition */
37
38 #define BOOT_TARGET_DEVICES(func) \
39         func(MMC, mmc, 1) \
40         func(MMC, mmc, 2) \
41         func(MMC, mmc, 0) \
42         func(USB, usb, 0) \
43         func(DHCP, dhcp, na)
44 #include <config_distro_bootcmd.h>
45 #undef BOOTENV_RUN_NET_USB_START
46 #define BOOTENV_RUN_NET_USB_START ""
47
48 #define UBOOT_UPDATE \
49         "uboot_hwpart=1\0" \
50         "uboot_blk=8a\0" \
51         "uboot_spl_blk=2\0" \
52         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
53                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
54         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
55                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
56         "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
57                 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
58
59 #define MEM_LAYOUT_ENV_SETTINGS \
60         "bootm_size=0x20000000\0" \
61         "fdt_addr_r=0x18200000\0" \
62         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
63         "pxefile_addr_r=0x18300000\0" \
64         "ramdisk_addr_r=0x18400000\0" \
65         "scriptaddr=0x18280000\0"
66
67 #define CONFIG_EXTRA_ENV_SETTINGS \
68         BOOTENV \
69         "boot_file=zImage\0" \
70         "boot_script_dhcp=boot.scr\0" \
71         "console=ttymxc0\0" \
72         "defargs=enable_wait_mode=off vmalloc=400M\0" \
73         "fdt_board=eval\0" \
74         "fdt_fixup=;\0" \
75         MEM_LAYOUT_ENV_SETTINGS \
76         UBOOT_UPDATE \
77         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
78                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
79                 "flash_eth.img && source ${loadaddr}\0" \
80         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
81                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
82                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
83                 " ${loadaddr} flash_blk.img && " \
84                 "source ${loadaddr}\0" \
85         "setup=setenv setupargs fec_mac=${ethaddr} " \
86                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
87                 "console=${console},${baudrate}n8\0 " \
88         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
89         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
90                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
91                 "source ${loadaddr}\0" \
92         "splashpos=m,m\0" \
93         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
94         "vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
95
96 /* Miscellaneous configurable options */
97
98 /* Physical Memory Map */
99 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
100
101 #define CFG_SYS_SDRAM_BASE              PHYS_SDRAM
102 #define CFG_SYS_INIT_RAM_ADDR   IRAM_BASE_ADDR
103 #define CFG_SYS_INIT_RAM_SIZE   IRAM_SIZE
104
105 #endif  /* __CONFIG_H */