ef03e765c7f0e51e31b4e638ccb7afe36c8a239f
[platform/kernel/u-boot.git] / include / configs / apalis-imx8.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2019 Toradex
4  */
5
6 #ifndef __APALIS_IMX8_H
7 #define __APALIS_IMX8_H
8
9 #include <asm/arch/imx-regs.h>
10 #include <linux/sizes.h>
11
12 #define CONFIG_REMAKE_ELF
13
14 #define CONFIG_DISPLAY_BOARDINFO_LATE
15
16 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
17 #define USDHC1_BASE_ADDR                0x5b010000
18 #define USDHC2_BASE_ADDR                0x5b020000
19 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
20
21 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
22
23 /* Networking */
24 #define CONFIG_IPADDR                   192.168.10.2
25 #define CONFIG_NETMASK                  255.255.255.0
26 #define CONFIG_SERVERIP                 192.168.10.1
27
28 #define MEM_LAYOUT_ENV_SETTINGS \
29         "fdt_addr_r=0x84000000\0" \
30         "kernel_addr_r=0x82000000\0" \
31         "ramdisk_addr_r=0x94400000\0" \
32         "scriptaddr=0x87000000\0"
33
34 #define BOOT_TARGET_DEVICES(func) \
35         func(MMC, mmc, 1) \
36         func(MMC, mmc, 2) \
37         func(MMC, mmc, 0) \
38         func(DHCP, dhcp, na)
39 #include <config_distro_bootcmd.h>
40 #undef BOOTENV_RUN_NET_USB_START
41 #define BOOTENV_RUN_NET_USB_START ""
42
43 /* Initial environment variables */
44 #define CONFIG_EXTRA_ENV_SETTINGS \
45         BOOTENV \
46         MEM_LAYOUT_ENV_SETTINGS \
47         "console=ttyLP1 earlycon\0" \
48         "fdt_addr=0x83000000\0" \
49         "fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
50         "fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \
51         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
52         "image=Image\0" \
53         "initrd_addr=0x83800000\0" \
54         "initrd_high=0xffffffffffffffff\0" \
55         "mmcargs=setenv bootargs console=${console},${baudrate} " \
56                 "root=PARTUUID=${uuid} rootwait " \
57         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
58         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
59         "netargs=setenv bootargs console=${console},${baudrate} " \
60                 "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
61                 "\0" \
62         "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
63                 "apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
64         "panel=NULL\0" \
65         "script=boot.scr\0" \
66         "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
67                 "if test \"$confirm\" = \"y\"; then " \
68                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
69                 "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
70                 "${blkcnt}; fi\0"
71
72 /* Link Definitions */
73
74 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
75
76 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
77
78 /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */
79 #define CONFIG_SYS_FSL_USDHC_NUM        3
80
81 #define CONFIG_SYS_BOOTM_LEN            SZ_64M /* Increase max gunzip size */
82
83 /* Size of malloc() pool */
84 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
85
86 #define CONFIG_SYS_SDRAM_BASE           0x80000000
87 #define PHYS_SDRAM_1                    0x80000000
88 #define PHYS_SDRAM_2                    0x880000000
89 #define PHYS_SDRAM_1_SIZE               SZ_2G           /* 2 GB */
90 #define PHYS_SDRAM_2_SIZE               SZ_2G           /* 2 GB */
91
92 /* Monitor Command Prompt */
93 #define CONFIG_SYS_CBSIZE               SZ_2K
94 #define CONFIG_SYS_MAXARGS              64
95 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
96 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
97                                         sizeof(CONFIG_SYS_PROMPT) + 16)
98
99 /* Generic Timer Definitions */
100 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
101
102 #endif /* __APALIS_IMX8_H */